SCP, Speed Custom & Performance Inc.

SCP, Speed Custom & Performance Inc. We sell the meanest & fastest circle track parts on the planet!

SCP will be CLOSED from Christmas Day through New Years Day. (Dec 25th-Jan 1st) We will reopen Friday January 2nd. Anyon...
12/24/2025

SCP will be CLOSED from Christmas Day through New Years Day. (Dec 25th-Jan 1st) We will reopen Friday January 2nd. Anyone needing parts during this time can message me for pickup.

We want to wish everyone a Merry Christmas and Happy New Year!! Looking forward to a great 2026!!

09/02/2025

NEW SBC DART SHP Block & NEW Rotating Assembly
Big Bore Short Stroke 385” Motor
New Dart SHP Block 4.155” Bore, 350 Mains
Block Has Been Fully Race Prepped:
Square Decked W/BHJ Fixture
Finished Honed W/Deck Plates
Lifter Bores Honed To Spec
Solvent & Water Washed
HP Cam Bearings Installed
Stainless Steel Freeze Plugs Installed
Pipe Plugs & Dowels Installed

New Lunati 46 lb 3 9/16” Stroke Crankshaft
New Callies/Compstar H-Beam 6” Rods
New Ross Forged Pistons w/11cc Domes
Seal Power Premium Rings
ACL Race Series Main Bearings
ACL Race Series Rod Bearings
Precision internally balanced w/heavy metal
Ready to assemble and WIN!!
$5900 cash.
Pick up at Speed Custom & Performance in High Ridge, Missouri

08/11/2025

Would like to thank all of you who volunteered to clean our bathroom UNTIL you found out we used windshield washer fluid for the “Frosty Down the Sh***er” picture. Damn it!!

VP “Stay Frosty” Down The Sh***er!Decided to change motors in our modified last week. Realizing we had $35/gal Frosty in...
08/10/2025

VP “Stay Frosty” Down The Sh***er!
Decided to change motors in our modified last week. Realizing we had $35/gal Frosty in the motor it became a challenge to recover every drop. We carefully removed the pipe plugs to drain the block. BAD NEWS, ¾ of a gallon ($26) down the “sh*tter”! It was all over the floor resulting in a big mess to clean up. It was impossible to get plastic container under the drain holes. The solution!! Called my buddy at the surplus store who found a hex fitting that will screw into the block and gets your drain point away from the block and over the pan rails. The fitting is steel, sticks out less than an inch and allows precision draining into a container. Figuring everyone has the same problem, we decided to put a kit together with 4 fittings and sell it for $12.00. If you buy it with VP Frosty you will get a 20% discount on the kit. ( If you have already bought Frosty from us the 20% will apply.) On our UMP motors with an aluminum Olson pan we use an additional 45 degree fitting that sells for $6.00.

08/10/2025
Time To Get Tanked & Releave Those Butt Aches!Every racer knows he should change the fluid in his Bert or Falcon  transm...
07/25/2025

Time To Get Tanked & Releave Those Butt Aches!
Every racer knows he should change the fluid in his Bert or Falcon transmission every 3- 4 nights. It is cheap insurance. It is not hard to drain but it is a pain in the ASS to refill. Lay on your back with a wrench, funnel, hose, pump, measuring cup, flashlight and a roll of paper towels to clean up the mess. The solution!! We had a small DECK mounted aluminum tank built that allows you to fill the transmission standing up on the outside of your car. Pour your fluid in a measuring cup, unscrew the cap and dump it in. (NOTE: Be sure & have “the wife” get down there & put the drain plug back in!!)

Water Temp Guage Causing Stains in Your Underwear?VP Racing new product Stay Frosty Coolant may be your solution! It is ...
07/22/2025

Water Temp Guage Causing Stains in Your Underwear?
VP Racing new product Stay Frosty Coolant may be your solution! It is NOT an additive, instead it REPLACES your current coolant. Stay Frosty is designed for high heat racing engines. VP claims up to a 30 degree reduction in temperature. Our SCP A-Mod was running 230-240 degrees after a feature. We built a shroud, changed fans and even removed the screen in front of the radiator. Still the same temps after a race. In desperation, we bought 3 gallons of the Racing Stay Frosty. Drained the old coolant, filled it up with Stay Frosty and off to the races on another heat wave July night. Results were pretty amazing, first night we ran 200 degrees and the following week on a heavy, heavy track we ran 210 degrees. “Praise the Lord” no more STAINS!!

SCP will be closed Friday July 4th & Saturday July 5th. We hope everyone has a fun, safe holiday weekend!
07/03/2025

SCP will be closed Friday July 4th & Saturday July 5th. We hope everyone has a fun, safe holiday weekend!

BODY PANEL OPTIONS!!SCP is now stocking plastic MD3 body panels along with continuing to keep a full line of Stakt panel...
12/12/2024

BODY PANEL OPTIONS!!

SCP is now stocking plastic MD3 body panels along with continuing to keep a full line of Stakt panels.

Come by and check out both! Save some time and leave your hammers in the toolbox for 2025!!

09/22/2024

I need a set of T&D, Jesel or Crower Shaft Rockers for a SB Chevy with Dart or World iron heads, GM Bowtie heads etc. Experimenting & not wanting to buy a new set yet! PM me with what you have.

07/29/2024

Phones lines and internet are down again!! Charter is unreal lately!! We’re here and open till 6:00.

07/01/2024

SCP Holiday Week Schedule

SCP will be open for limited hours on Wednesday July 3rd (9:00-12:00) and closed Thursday July 4th in honor of Independence Day! We will reopen Friday July 5th for normal business hours. Wishing everyone a Happy 4th!!

Address

3475 High Ridge Boulevard
High Ridge, MO
63049

Opening Hours

Monday 9:30am - 6pm
Tuesday 9:30am - 6pm
Wednesday 9:30am - 6pm
Thursday 9:30am - 6pm
Friday 9:30am - 5pm
Saturday 9am - 12pm

Telephone

+16366771320

Alerts

Be the first to know and let us send you an email when SCP, Speed Custom & Performance Inc. posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Share