Havoc Motosports

10/09/2026

This 2026 YZ250F came to us for a tear down straight off the showroom floor.

Most people do not realize how important it is to grease your brand new machines. The factory puts little to nothing in your high wear points.
No need to worry, here at Havoc Motosports we will take care of the hard stuff for you and get your machine track ready for the season ahead!!!

Work completed:
Front fork rebuild
Suspension tuning for riders weight
Full tear down and greased swingarm, Linkage, steering stem, axles, etc.
Oil and filter change
Coolant flush
Install new mapping for riders riding style
Etc.

Give us a shout today to sercure your spot in the shop!!! (276)-867-7764
Mail in motors are accepted📬

10/09/2026

Another one bites the dust!!!
This 2006 Yamaha YZ250F came into the shop for a siezed triple tree, boyeson Quick Shot Install, re-jet, and a valve adjustment. We went ahead and gave this man the works and got him back ready to rip the track with confidence.
Give us a shout to secure your spot in the shop and lets get you back ripping for one last ride before the cold comes in.

(276)-867-7764

Mail in motors accepted📬

09/16/2026

2022 KX85 On the bench for a complete overhaul.
Give us a shout at Havoc Motosports to secure your spot today!!!
(276)-867-7764
Mail in motors accepted📬

Send a message to learn more

07/07/2026

We hope everyone had a great 4th of July weekend!!! Time to get back in the saddle and work off those liquid calories. We currently have spots open from simple services to full engine over hauls and we are ready to tackle it all.
Here's a couple pics from the past week in the shop!!!
Give us a shout today to secure your spot.
(276)-867-7764

06/18/2026

SOLD❗️❗️❗️
$3,000 OBO!!!
1 HOUR OF RUN TIME ON FULL REBUILD AND NEW PARTS.
New vertex piston kit
New OEM Valves (3 intake, 2 exhaust)
New OEM Cam chain
New valve springs and retainers
Pro-X connecting rod kit (professionaly installed and trued)
Hot Rods crank bearings and seal kit
Hot Rods transmision bearing kit
Vertex oil seal kit
Tusk complete gasket kit
OEM Yamaha water pump seals and bearing
Yoshimira RS-4 Slip On exhaust
Full carb rebuild and tune (midbody, main body, and accelerator pump)
New OEM Carb jet Access nut (17mm)
Pro circuit Hot start nut
New Hi-flo Oil filter
Fresh front fork service/rebuild (1hr ride time)
New grips
New all balls clutch cable
New all balls throttle cable
Steel braided front brake line
New rear brake pads
New front brake pads
All brake fluid has been freshly flushed/serviced
New EBC clutch kit
ASV levers with clutch perch assembly
Pro taper contour bars
TM. Designs rear chain guide
New Chain
Vortex 13t front sprocket
Vortex 48t rear sprocket
Comes diff rear tire 80%

06/08/2026

SOLD!!!
2012 Suzuki RM85L
$2,500 OBO!!!
Low frame hour machine
Cash only!!!
8 hours on the bottom end
1 hour on full top end rebuild:
NEW OEM Suzuki Cylinder
Fully polished power valve system
Wiseco piston kit
Vertex gasket kit
Freshly cleaned carb
Freshly flushed coolant (engine ice)
Fresh oil change
New airfilter
All brake fluid has been flushed and rebled
All bearings are good to go (linkage, wheel bearings, steering stem, swingarm etc)
New Pro taper Half waffle cut grips
Good brake pad life front and rear
All labor was performed by Havoc Motosports EXCEPT THE BOTTOM END.
Havoc has come to the conclusion that everything looks exceptional in bottom end and the prior build was done correctly.

06/05/2026

This 2009 Yamaha YZ250F came In for a full rebuild. Due to a rod failure right after a fresh top end build. For most people this would be detrimental luckily at Havoc Motosports we have the knowledge and tools to keep you rolling no matter what!!!

This motor will be getting:
Five brand new OEM valves
All new seals and gaskets
New crank bearings and transmission bearings
Vertex piston kit
New vertex cylinder
Pro-X rod kit
And much more!!!
Stay tuned for the builds that are coming this is the tip of the ice berg here at Havoc and we can't wait to continue to serve our great racer's in Virginia.

Contact us today to secure your spot in the shop.
(276)-867-7764
MAIL IN MOTORS ARE ACCEPTED AS WELL.

05/31/2026

Good luck to our riders that are lining up this morning at the local VCHSS race. Yall be safe and go get them!!! Wish I could be there with yall this weekend.
Daniel Graham /Zane Graham
Colton Query

05/09/2026

From sunk to sending it again. 🌊🏁🔥

This 2021 Kawasaki Brute Force 750 EPS V-Twin landed at Havoc Motosports after being sunk by the owner and sitting at another shop before making its way to us for a full rebuild. The engine showed up completely torn down to the transmission, but that didn’t stop us from bringing this beast back stronger than ever.

Work completed:
✅ Engine case swap
✅ New crank rods & polished crank
✅ New OEM bearings & seals
✅ New pistons & cylinders
✅ New OEM valves & seals
✅ Full gasket replacement
✅ Cases, cylinders, and heads cleaned through the blast cabinet

Water may have tried to end it, but now this Brute Force is built to rip again. Tight tolerances, fresh internals, and no shortcuts, just raw power ready for the mud, trails, and whatever comes next.

At Havoc Motosports, we don’t just rebuild machines, we bring them back stronger, nastier, and ready to unleash havoc on the trail.

📩 Message us today for rebuilds, repairs, and performance work.