Team Acme Inc.

Team Acme Inc. Most companies struggle to master one area of business. We rock at 3! Auto Glass, Tint, Vehicle Wraps Year after year we strive to get better and better.

From the latest certifications in auto glass, window tint computer cutting, to the latest software for design. We love our business because it never stands still. All of our products continuely change and get better, which means, installation and options continually change and grow. We love the new challenges and new ideas to keep our company on the fore front of the industry spectrum.

🔥 Protect Your Investment with STEK Paint Protection Film 🔥Your vehicle deserves more than just a wash and wax. Keep you...
06/10/2026

🔥 Protect Your Investment with STEK Paint Protection Film 🔥

Your vehicle deserves more than just a wash and wax. Keep your paint looking flawless with premium STEK Paint Protection Film installed by the experts at Team Acme.

✅ Defends against rock chips, road debris, and scratches
✅ Self-healing technology helps eliminate swirl marks
✅ Preserves your vehicle's showroom finish
✅ Available in Gloss, Matte, and Satin finishes
✅ Backed by industry-leading warranty Legend Paint Protection
Trusted by enthusiasts, collectors, and government fleets throughout Southern Nevada.

📍 680 Professional Ave, Henderson, NV
📞 Contact Team Acme today for a free quote. 702-566-8326

06/09/2026

Nobody talks about how vinyl decals can permanently haunt your car 👻

That "ghosting" look after removing letters isn't just leftover glue..

🧐 This is the theory: ghosting occurs most often on white vehicles when surfaces get super hot, potentially causing trapped glue gases to permeate the clear coat.

While this browning effect is a guess for the cause, in many other cases, the "ghosting" is actually just perfectly glossy paint that was protected by the sticker while the rest of the car's finish dulled over time.

But wait... before you reach for chemicals, just try a light polish first.

Chemical "removers" often fail because the problem is under the surface, NOT on top of it.

At the end of the day, your best bet is just to wait it out ⏳

Has ghosting ever happened to you after a decal removal?

06/01/2026

There's a reason your car emblems keep falling off. First off, ceramic coatings are literally designed so nothing sticks to them.

That includes your badges.

Even on vinyl, re-using old emblems is usually a waste of time.

Once that factory bond is broken, you can't just "glue" it back.

The chemicals used to clean the old foam usually ruin the new adhesive anyway.

👉 If you’re wrapping or ceramic coating your car, just buy new emblems or go for the debadged look.

It saves you the headache of chasing letters down the highway after a car wash 🤣🧼

What do you think looks better, debadged or original factory look?

Broken window? We’ll get you back on the road fast. ⏱️ + We accept most insurance! At Team Acme, we’re proud to have Nev...
05/25/2026

Broken window? We’ll get you back on the road fast. ⏱️ + We accept most insurance! At Team Acme, we’re proud to have Nevada’s only AGRSS Master Certified Technician on staff. We strictly follow the Auto Glass Safety Council (AGRSS) guidelines to ensure every installation meets the highest safety standards.

Only dealing with a small rock chip? Don’t wait for it to spread. Chip and crack repairs start at just $75, with fast service to help prevent bigger damage down the road.

📞 702-566-8326

05/25/2026

It’s actually not the tint that damages your defrosters... It’s the removal. When old film is pulled off or scraped with a razor, it breaks the electrical flow and your defroster will stop working. 🥶

If your tint is bubbling, get it fixed ASAP. Because the longer it sits, the more it bonds to the metal, making a clean removal almost impossible.

If a shop isn’t careful during removal, your heater is toast. Better to pay for a pro than a new back window!!

Have you ever had their rear defroster stop working after a tint removal?

05/25/2026

Wetter is NOT always better. 🚫💦 Most people think "wet" is safer for repositioning, but water is actually your worst enemy when it comes to vinyl wrap.

It kills the tack and makes deep curves almost impossible to stick.

Now when it comes to PPF wrap, water is actually your best friend.

Some brands are pushing new "dry" PPF wrap, but it usually leaves marks and looks like a mess.

Remember... just because it's a "wrap" doesn't mean the rules are the same!!

Vinyl wrap = dry
PPF wrap = wet

Have you tried the new dry PPF options, or are you sticking with the wet method?

05/21/2026

3 things you need to know this before you decide to get Stealth PPF (AKA Matte PPF). 👇

1. First off, the material itself costs roughly 50% more than standard gloss. 💰

2. Unlike gloss, you can’t just do a "partial" kit. It’s the whole car or nothing.

3. If you have rock chips or deep scratches already, the film won't save you. This is why you rarely see it on used cars.

So... would you drop thousands of dollars to matte out your daily driver?

05/21/2026

If you're not pre-stretching, you're making a mistake! 😳 If you just lay it flat and start squeegeeing, you’re pretty much pushing the material into a corner.

That creates "fingers" and tension that wants to pop back the second you walk away.

("fingers" are the wrinkles or excess material that bunch up along the edges or curves of a panel when the film is stretched)

The pro move is pre-stretching the vinyl about 30% larger with some heat BEFORE it even touches the car.

So instead of pushing it out, you’re letting the material shrink back and anchor itself around the edges.

But don't go too crazy... you can definitely over-stretch. Pulling the vinyl too tightly into a recessed area or around a curve causes the material to bunch up at the perimeter.

Pro tip: Always post-heat the edges to 'kill' the memory. 🔥 If you don't, that vinyl will eventually try to go back to its original shape.

Have you tried pre-stretching, or do you prefer the glassing method? 🤔

05/17/2026

Most people think you can wrap any plastic, but LSE surfaces are a pain in the 🫏🤬

Low Surface Energy (LSE) plastics are super porous and usually coated in oils

Standard vinyl glue just won’t bite.

That’s why your Jeep trim or dirt bike fenders always peel.

❌ The secret isn’t more heat.

It’s using rigid, pre cut kits that lay flat.

Permanent LSE adhesive doesn’t move or stretch once it’s down. One mistake and it’s game over because these suckers lock down instantly!!

ALWAYS ask a pro for help with these, or you're just throwing money away.

Have you ever tried wrapping textured plastic, or did it peel immediately?

05/14/2026

Thinking about getting an anime wrap? Start with high quality files.

The biggest mistake people make with anime wraps is ignoring the resolution.

Most new artwork isn't high enough quality to print at car scale.

If you don't have the raw vector files, your itasha is going to look like a pixelated mess. 💩

Check out dedicated vector art sites. Many artists specifically license high-res versions of their fan art for car projects!

Design is also about more than just slapping a character on the door like a sticker.

Think of the background as the glue that makes the character part of the car. Use action effects like poofs, clouds, or fire to wrap around those weird body lines.

Which anime character are you putting on your car first? 🏎️

Address

680 Professional Avenue
Henderson, NV
89015

Opening Hours

Monday 8am - 5pm
Tuesday 8am - 5pm
Wednesday 8am - 5pm
Thursday 8am - 5pm
Friday 8am - 5pm

Telephone

+17025668326

Website

Alerts

Be the first to know and let us send you an email when Team Acme Inc. posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Team Acme Inc.:

Shortcuts

Share

Category