Extreme Off Road LLC.

Extreme Off Road LLC. Custom Off Road vehicles and complete vehicle builds. Specializing in Early Broncos, custom fabrication, paint and body.

Here's a Restomod build of an '81 Scrambler I built for David. The intent was a classic Scrambler, with modern amenities...
04/17/2024

Here's a Restomod build of an '81 Scrambler I built for David. The intent was a classic Scrambler, with modern amenities that could be used as a daily or for overlanding. It's powered by a 5.3 LS, 4l80 auto, twin stick D300. Ceramic coated headers and stainless exhaust. 4" lift with PSC steering box and upgraded steering. 35" tires on beadlocks. It has a lot of custom mods. Full interior cage, custom bumpers with a Warn 8000lb winch, side steps that double as rocker guards. The bed rack is handy for overlanding excursions and is removable. Custom belly pan and engine cover. Air conditioning, cruise control and throttle by wire. The interior has Speed Hut digital classic gauges. The seats are leather, 8 way adjustable, heated and cooled. Bluetooth stereo and plenty of off road and cargo lights to light the night. Slick black paint and Scrambler stripes to accent. This should be a fun ride for the street or trail!

I had Justin's Bronco back in the shop for a new cage that better suited his needs. I think it turned out nice.
04/17/2024

I had Justin's Bronco back in the shop for a new cage that better suited his needs. I think it turned out nice.

Here's a '68 Bronco I was asked to put a bed floor and cage in. Unfortunately, they are always worse than they appear. T...
04/17/2024

Here's a '68 Bronco I was asked to put a bed floor and cage in. Unfortunately, they are always worse than they appear. Thanks Chad for trusting me to fix your Bronco. I never did get a picture with the rocker skis installed.

This isn't one of my usual builds, an original restoration this time. 1965 Oldsmobile 442 Convertible, Forest Mist green...
08/15/2022

This isn't one of my usual builds, an original restoration this time.
1965 Oldsmobile 442 Convertible, Forest Mist green metallic.
Numbers matching 400ci. 4 Jet carb, Jetaway automatic.
Factory Options: Air Conditioning, power steering, power brakes, tilt wheel, power top, power antennae, clock in dash, AM radio, power seat, power windows, remote door mirror, vanity mirror, tach in console, under hood and trunk lights, deluxe seat belts.
The engine, transmission, and rear end are all completely rebuilt, along with brakes, steering, suspension, and fuel system.
I cut out rusted areas and replaced, fabricated lower inner and outer quarter panels that are not available. Full paint and body on the rotisserie.
It cruises smooth and quiet down the road.

A few were asking about the '85 Toyota build. Here it is:1985 Toyota extended cab pickup. 117" wheelbase.22RE Engine, R1...
06/09/2022

A few were asking about the '85 Toyota build. Here it is:
1985 Toyota extended cab pickup. 117" wheelbase.
22RE Engine, R151 5 Speed trans. Toyota double cases, 4.7 gear kit with triple stick. Locked front and rear, Longfield shafts, hydro assist steering. 63" GM springs. Internal and external cage through the front clip. Tubular flat bed with lockable trunk. Side quarter and door body armor. Mastercraft seats.

Cage Kits are ready to ship. If you will be at OCBR, you can save on shipping and pick it up there.Family Style Cage Kit...
03/17/2022

Cage Kits are ready to ship. If you will be at OCBR, you can save on shipping and pick it up there.

Family Style Cage Kits for 1966-1977 Broncos
Cages in kit form.
Bent, notched and ready to weld together.
Bends are smooth and notches are clean.
Fits under a hard top or a soft top.
Includes 3 grab handles.
Built in the USA from 1 3/4" .120 wall HREW steel tubing.
Base Cage kit is $950
DOM Upgrade is extra depending on market.
Seat Tubing Option is $200 HREW, DOM extra (see pic)
Frame Tie in kit is $200
Shipping $350 for the basic kit, $100 for the seat upgrade or frame tie ins to the lower 48 states.
Fully welded, media blasted and powdercoated bolt in cages also available for local pickup at extra cost depending on options. Due to all the variations, conditions age, and modifications done to EBs, we recommend fitting the cage to YOUR Bronco for the best result. The cage will need to be attached to the frame for safety and maximum protection.
Interested? Contact us today!
Steve @ Extreme Off Road LLC.
(816)729-3158 or PM Steve Mikulicz
David @ SPFab and Sound LLC.
(314)803-6917 or PM David Lindemeyer

Cage kits are ready to ship. If you’re coming to OCBR you can save on shipping and pick it up at the event.
08/25/2021

Cage kits are ready to ship. If you’re coming to OCBR you can save on shipping and pick it up at the event.

I've had it done for a while, but here is the result of the '66 C10 that I've been building. It was a ground up build wi...
06/02/2021

I've had it done for a while, but here is the result of the '66 C10 that I've been building. It was a ground up build with an LS3/4L70 power plant, completely new chassis with coilover suspension, 9" rear end, 20's up front, 22's in the rear. Several body modifications include seams welded and smoothed, bed radiused, filled, and seams welded. Firewall modified for engine swap, bumpers raised and moved in, tail panel fabricated and many more. Other options include one touch power windows, digital dash, flush mount air conditioning, flush mount cup holders, push button start bluetooth stereo, and custom leather interior. It was a fun truck to build that has already been tearing up the streets.

Here is a '68 Bronco I worked on for Joe Seibert. He primarily uses it off road and it has only been in primer the years...
05/22/2021

Here is a '68 Bronco I worked on for Joe Seibert. He primarily uses it off road and it has only been in primer the years he owned it. He wanted Grabber Blue paint, the interior and wheel wells sprayed with bed liner, a twin stick installed on the transfer case, rock skis, the fuel system and steering repaired, and several other upgrades. The Body was very rough when it arrived. He was looking for a much cleaner Bronco that he could still use off road. The first time he drove it after picking it up was in Sand Hollow and Moab Utah. He even earned a few paint dings on his first trip. Nice job Joe!

Here's a custom cage I built for Dustin. He wanted a simple cage with plenty of support for the extra horsepower, yet a ...
05/20/2021

Here's a custom cage I built for Dustin. He wanted a simple cage with plenty of support for the extra horsepower, yet a tight fit with an original top and headliner. The goal was to not be visible from the exterior and not obstruct vision and egress from the interior.

Who’s ready for a cage? Time to spend that stimulus or tax return. Cages are in stock ready to ship.
03/29/2021

Who’s ready for a cage? Time to spend that stimulus or tax return. Cages are in stock ready to ship.

New T-Shirts are in! Two designs, both in navy and dark grey. Sizes M-2XL. $15 each.
09/16/2020

New T-Shirts are in! Two designs, both in navy and dark grey. Sizes M-2XL. $15 each.

Address

Harrisonville, MO
64701

Website

Alerts

Be the first to know and let us send you an email when Extreme Off Road LLC. posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share

Category