47point9

47point9 Crafting premium titanium keys, parts, and accessories tailored for automotive enthusiasts.

09/01/2026

💦 Some wet blasting action on one of my NAx titanium keys... fitment for your classic Honda 😎. Solid billet titanium, hand finished + blasted for that smooth, silky finish.
🖥️ Get yours at 47point9.com/nax! Customizable surface finish, engravings, and anodizations.




08/24/2026

🤔💪 One of my 300zx titanium keys with a custom engraving. CNC machined solid billet titanium, hand finished, hand polished, and expertly laser engraved.
🔥 My 300zx titanium keys are available at 300zxtitaniumkeys.com!

That's a creative way to let me know your order number to send me a key for cutting 😆
08/16/2026

That's a creative way to let me know your order number to send me a key for cutting 😆

⚡ 3D printed a prototype that houses a magamos 13 immobilizer for newer Hondas - including the S2000! I will have both b...
08/07/2026

⚡ 3D printed a prototype that houses a magamos 13 immobilizer for newer Hondas - including the S2000! I will have both blanks available - the HD103 and HO01 (laser cut keys) for the newer models. Going to machine a titanium sample for further testing!

😑 My 240SX keys are back in stock. I've actually had this batch for a while but I never got around to finishing out the ...
08/05/2026

😑 My 240SX keys are back in stock. I've actually had this batch for a while but I never got around to finishing out the surface. Visit 47point9.com/240sx to get yours!
👽 In the background is my own 240SX I bought a month or two ago. While I'll likely never actually drift it, I've got it decked out with all kinds of drift goodies and it currently has a built 1JZ sitting in it. Probably yanking the 1J and doing another motor 🤔

🤔 About to do some measurements and model adjustments to fit a transponder. Finally going to try to work out the details...
08/05/2026

🤔 About to do some measurements and model adjustments to fit a transponder. Finally going to try to work out the details for a modular key system... if all is well then I should be able to prototype a few keys in the near future.
♥️ What key do you want to see me make next? Drop me a DM and I may give you the first prototype to test.

07/25/2026

🕳️ I filmed the first half of this like you would look at the sun during an eclipse... through a tiny pinhole in a sheet of paper. Science! Never thought I would do anything with that past the third grade.
🔪 Custom engraving on one of my blank N2 keys - a Pulsar logo! Doing a deep engraving on this one. A logo this large takes a while to get a deep result 😔

07/23/2026

😎 The blurple anodization shifts between blue and purple'ish depending on the angle you look at it. It can change quite a bit and appearance depending on the surface finish (v***r blasted, brushed, or polished). Pictured is a polished surface finish on my 300ZX SE titanium key.
🌐 Get yours at 300zxtitaniumkeys.com

⚡ I'm thinking about adding the edge knurling as an option on my Honda nax keys - thoughts? This was my first try at rep...
07/21/2026

⚡ I'm thinking about adding the edge knurling as an option on my Honda nax keys - thoughts? This was my first try at reproducing the look and feel. I have since created a 3d depth map and tested different settings and engraving depths, with a few promising results.
✅ Im going to do another test or two. I initially was going to machine this area into the key but I thought the process of cleaning up the surface would muddy the fine details.

1️⃣ One of my "Oldschool" Nismo lighter handles going out in a purple anodization. I've been thinking about making some ...
07/19/2026

1️⃣ One of my "Oldschool" Nismo lighter handles going out in a purple anodization. I've been thinking about making some custom toggle switches for one of my projects I'm working on using this kill switch design as the base... either this or a canbus switch panel, but I think titanium switches sounds a lot cooler 🫪
These mount over your existing cigarette lighter or you can purchase with the optional "lighter blank" for a flush mount against the hole your lighter presses into. I've redesigned the lighter blanks to be a tight fit, but a dab of adhesive keeps them perfect.

Address

Greer, SC
29681

Opening Hours

Monday 9am - 5pm
Tuesday 9am - 5pm
Wednesday 9am - 5pm
Thursday 9am - 5pm
Friday 9am - 5pm
Saturday 9am - 5pm

Website

Alerts

Be the first to know and let us send you an email when 47point9 posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share

Category