Finger Lakes Vintage Auto Parts

Finger Lakes Vintage Auto Parts Vintage auto parts sales located in the Finger Lakes region of New York Instagram

I finished up going over most of the hubcaps and wheel covers left, so I decided to get all of the beauty rings and trim...
05/20/2026

I finished up going over most of the hubcaps and wheel covers left, so I decided to get all of the beauty rings and trim rings out to go over. While I know hubcaps and wheel covers very well, I don't really know these so for the most part can only tell the wheel diameter and not the exact application. Some are universal fit enough to work on many things, some are more specific. Each picture is labeled with the wheel diameter, many are sets of 4 or more, some singles. I can get additional pictures of anything seen including the backsides.

*REDUCED PRICE* *FOR SALE* 1958 Chevy Bel Air 2dr sport coupe. This is a hardtop with no B pillar, but has door frames f...
05/17/2026

*REDUCED PRICE* *FOR SALE* 1958 Chevy Bel Air 2dr sport coupe. This is a hardtop with no B pillar, but has door frames for the window glass. It is a project. The frame is very solid, but needs a bunch of sheet metal work, floors, trunk, lower panels. Some was started but wasn't done well. It was mostly taken apart, the front clip and passenger door are just sitting in place. It doesn't have all of the parts but there are quite a few included, along with some extra body/exterior pieces. All of the stainless trim beltline and up is there, no side trim besides the paint dividers. Most glass is good. It comes with 4 matching wheels as seen on the passenger side. It currently has no transferable registration but if in NY it's super easy to get, I can help if needed. Asking $2500. Located in New York zip 14561.

*FOR SALE* I believe this a 1946 Oldsmobile Dynamic Series 76 2dr fastback. There are NO tags on it to identify so I am...
05/16/2026

*FOR SALE* I believe this a 1946 Oldsmobile Dynamic Series 76 2dr fastback. There are NO tags on it to identify so I am not 100% sure, wheelbase is about 125". This was a project that was pretty much fully disassembled. The front frame section has been replaced with one from what looks like an 80s Mustang. The frame is very solid throughout, the body is also quite solid overall, floors and trunk are pretty good. The lower sheet metal has some rust and dents here and there. It does not come with everything, but has quite a few parts that go with it, including extras. Again, there are NO tags on it and no paperwork, so maybe best for parts/donor unless you can figure something out. Will come with different wheels than seen on the back. Asking $1250, Located in New York zip code 14561.

*FOR SALE* 1972 Chevelle 2 door project. Originally a pretty base model 350/4 speed manual car. The frame is straight an...
05/16/2026

*FOR SALE* 1972 Chevelle 2 door project. Originally a pretty base model 350/4 speed manual car. The frame is straight and very solid, no rot anywhere. It will need the trunk and floor pans replaced, comes with the floor pans. It has some random mismatched panels, most are pretty solid. No front clip parts besides the one fender. It is missing most of the interior. The quarter panels are originals from another car, just sitting loosely in place. Roof/package tray area/rear trunk areas will also need work. Has door glass and rear window. Comes with a bunch of random parts, including all of the stainless trim, there is more than what is seen. I have pictures of more parts and of the underside available. No paperwork, but has a legible vin so obtaining it in NY would be easy. Will come with different roller wheels than what are pictured. Asking $2000. Located in New York zip 14561.

*FOR SALE* 1947 Mercury Eight 2 door coupe. This is a project that has been mostly disassembled. The frame is very solid...
05/16/2026

*FOR SALE* 1947 Mercury Eight 2 door coupe. This is a project that has been mostly disassembled. The frame is very solid. The lower sheet metal has rust and will need work on the floors/trunk etc. There is no drivetrain. It has all of the body parts, a good majority of the interior parts, all of the exterior trim, lights/lenses, steering wheel/column, etc. There is more than what is seen, I have more pictures of parts and the underside of the car available. It does not have a title/registration but has a bunch of paperwork including a vin check along with a legible vin on the frame so getting it in NY would be easy at least. Asking $2500, or $3000 package deal for both this and the '46 Ford. Located in New York zip 14561.

*FOR SALE* 1946 Ford Tudor Deluxe sedan. It was originally a V8 car. It is just the body and rolling chassis. The frame ...
05/16/2026

*FOR SALE* 1946 Ford Tudor Deluxe sedan. It was originally a V8 car. It is just the body and rolling chassis. The frame is very solid. The body and floors are also in pretty good shape as well. It is missing the front clip, drivetrain, interior, etc. It does not have any paperwork, but has a legible vin on the frame so it would be easy enough to get in NY, or it would be a good solid donor for another 1946 1947 1948 Ford project. Asking $1000, located in New York zip 14561.

Getting caught up on listing more hubcaps and wheel covers since it's a bit chilly and rainy out today. Looks like we ar...
05/14/2026

Getting caught up on listing more hubcaps and wheel covers since it's a bit chilly and rainy out today. Looks like we are going to jump right into summer over the next few days so I will hopefully finish up with these quickly so I can get to the new projects to get them listed.

Here's the '72 Chevelle project that was also part of the trade. It is missing a bunch, but is solid where it matters an...
05/13/2026

Here's the '72 Chevelle project that was also part of the trade. It is missing a bunch, but is solid where it matters and definitely has potential considering everything can be ordered out of a catalog for these. It was originally a pretty base model non-Malibu 350/4 speed car. Not sure what the plan is for this one yet, I am going to work on going through the others first to get them listed.

I've been trying to sell off a few projects to make more room, so the logical thing to do is trade one of them for 3 mor...
05/13/2026

I've been trying to sell off a few projects to make more room, so the logical thing to do is trade one of them for 3 more projects, right? I traded the '67 Vista Cruiser for a 1947 Mercury Eight coupe, 1946 Ford 2dr sedan, another 1972 Chevelle project, and a handful of random parts. There is enough to make one Mercury pretty much complete besides the drivetrain, once I go through them they will be for sale, along with all of these other wheels/panels seen.

I went over a handful of hubcaps today, here are some pictures. I was able to complete some sets of caps i've had kickin...
05/08/2026

I went over a handful of hubcaps today, here are some pictures. I was able to complete some sets of caps i've had kicking around for a while, which was nice as I generally wait to post any until I have at least 4. It still doesn't look like I even made a dent in the pile of caps, hoping to get more done tomorrow.

Address

Gorham, NY
14561

Telephone

+15859449192

Website

Alerts

Be the first to know and let us send you an email when Finger Lakes Vintage Auto Parts posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Finger Lakes Vintage Auto Parts:

Shortcuts

Share

Category