Hackjobs Performance

Directions Website Contact the business

Hackjobs Performance An honest and friendly shop. We're dedicated to personalizing your vehicle at an affordable price wh Same ole Hackjobs at a new location

We finished this truck last year. Came in for a faulty crank sensor and a quick once over. Back to the owner it goes. Ju...
10/04/2026

We finished this truck last year. Came in for a faulty crank sensor and a quick once over. Back to the owner it goes. Just some before and afters.

Another complete rewire done with American Autowire. This cool 87 LS3 swapped pick up came in with the old crusty chassi...
09/26/2026

Another complete rewire done with American Autowire. This cool 87 LS3 swapped pick up came in with the old crusty chassis harness. The LS swap was already complete with a aftermarket standalone and some dakota_digital vfd gauges. We dissected those components off the old harness and added them back to the new one. Now this thing is ready to roll just in time for our nice weather.

This beautiful 1956 bel air came in for a full wire treatment. We started with the American Autowire kit getting every w...
09/20/2026

This beautiful 1956 bel air came in for a full wire treatment. We started with the American Autowire kit getting every wire replaced from headlight to taillight. Going in next was PSI Conversion LS standalone harness with new wiring and connectors for the engine management. After all that we went with a set of Dakota Digital RTX gauges so the owner can monitor all the engine vitals. Now back to the builder it goes to finish the final touches on the LS conversion.

Check out this super clean 3rd Gen formula! Customer concern was extreme high idle at start up. We hooked up our smoke m...
09/06/2026

Check out this super clean 3rd Gen formula! Customer concern was extreme high idle at start up. We hooked up our smoke machine so we could get a visual on any vacuum leaks. We found the intake manifold gasket to be faulty along with the intake manifold lower plate gasket. Let us know if we can help you with maintenance on your LS or LT swapped vehicles.

This beautiful GMC came in just for the final touches. The owners of this truck did an amazing job on this build. We hel...
08/24/2026

This beautiful GMC came in just for the final touches. The owners of this truck did an amazing job on this build. We helped finish the American Autowire kit and PSI Conversion standalone harness install. We also installed a set of Dakota Digital VHX gauges with the bim module. Omar at Omar made us a custom cold air intake. We put some finishing touches and got it fired up. Let us know if we can help you finish your dream!

07/13/2026

On this really good looking Nova we put the final touches on the wiring, cleaned it up a bit, and finished some plumbing. Just about ready to hit the streets. Let us know if you have a stalled project that needs that final push.

07/05/2026

This clean LS swapped OBS came in with some issues. We tore into it. Installed a Brian Tooley Racing stage 2 truck cam kit, lifters and head gaskets. We also installed Speed Engineering long tube headers and an aluminum radiator with efans. We also cleaned up the bay a bit without getting carried away.

We got this Cat eye 2500 short bed in for some engine noise. We found a spun cam bearing. The engine got sent to our mac...
05/31/2026

We got this Cat eye 2500 short bed in for some engine noise. We found a spun cam bearing. The engine got sent to our machinist. We ordered up a stage 2 truck cam kit, lifters, all new gaskets, and supporting parts. After we got everything assembled on the fresh engine rebuild, and the engine reinstalled, it was ready for the customer to take to his preferred tuner.

This super clean Escalade came in with a collapsed lifted and bent push rod. We ripped into it deleting the displacement...
05/18/2026

This super clean Escalade came in with a collapsed lifted and bent push rod. We ripped into it deleting the displacement on demand. In addition we installed a stage 2 Gen V truck cam from . Out the door it went. Will be back soon for long tube headers

01/26/2026

Putting the final touches on the Chevrolet Cheyenne. This truck came in burnt to a crisp. We started by completely gutting the truck. After, it went straight to to get a new roof installed and inside cab and firewall paint. After we got it back, we started by installing an .autowire kit for the body electronics. We also installed a LS3 6l80 combo from our trusted buddies at . A harness was used to control that combo. We installed RTX gauges and for monitoring and comfort. The suspension and brakes were also addressed. handled all the aluminum fabrication. We also installed new doors, hood, and cowl from Customer took it to his choice of auto body and interior

Address

7915 N Glen Harbor Boulevard Suite 317
Glendale, AZ
85307

Website

Alerts

Be the first to know and let us send you an email when Hackjobs Performance posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Hackjobs Performance:

Shortcuts

Sponsored

Share

Category