Campbell Ent. Custom Fabrication

Campbell Ent. Custom Fabrication The Campbell's are known for their dedication to detail and quality of their work. Metal fabrication
(1)

07/17/2026

A quick video of Wayland in his Campbell car this past weekend at the race. Check out his recap below!

"They say you can’t win the race in qualifying… but you sure can make it harder. 😂
After rolling the car in qualifying, we lined up dead last. The crew worked their magic, the USD Sticky Team helped piece the body back together, and we went to work.

A few sensor issues and a well deserved flat were the only things keeping me from getting on the box!

➡️ Started: Last
⬆️ Finished: P7

We’ll take that all day.

Huge thanks to everyone who had a hand in getting us back on track, and to all of our sponsors for believing in this team.

Also… keep your eyes peeled. 👀 The next time you see this car, it might be wearing something a little different."

As the chassis underwent construction, our team began fitting the Red Jeep with body armor and rockers. The customer's c...
07/15/2026

As the chassis underwent construction, our team began fitting the Red Jeep with body armor and rockers. The customer's chosen upgrades include GenRight doors, windshield, corner guards, tailgate, and rear filler plate body armor for both LJ's.

After the frames got completely torn down, they were shipped off to GenRight to get outfitted with their Tracer Suspensi...
07/14/2026

After the frames got completely torn down, they were shipped off to GenRight to get outfitted with their Tracer Suspension package. They have designed this chassis to increase up travel, add more ground clearance, optimize geometry, and also lower the engine and transmission by 2 inches.

A few things that come with this chassis:
2.5" King IBP Coilover shocks
2.0" King Hydraulic Bump Stops, front & rear.
Currie Extreme 70 front axle 35 spline 4340 shafts with 5.38 gears, 1350 yoke, locking hubs and Auburn electric Locker.
Currie 70 rear Axle 40 spline 4340 shafts, full float hubs with 5.38 gears, 1350 yoke and Auburn electric Locker.
Summit Machine 7075 Aluminum Control Arms w/ Genuine Rock Jock Johnny Joints.
Howe Steering Box, Remote Res, Ram Assist, Pump and Fluid Cooler.
GenRight CrMo Hi Steering components with genuine FK Heims.
GenRight Billet 4340 CrMo pitman arm.
GenRight 26 Gallon Gas Tank and HD Skid Plate.
GenRight 1-1/4" Rear Sway Bar with 7075 aluminum links.
Stainless steel brake lines plumbed with -3AN fittings
Fuel lines routed & plumbed from fuel tank
Vent Lines routed & plumbed up control arms
Locker Wires routed & plumbed up control arms

A long time family friend brought his 1936 Chevy Truck into the shop to get a makeover and add his own touches. Today, P...
07/13/2026

A long time family friend brought his 1936 Chevy Truck into the shop to get a makeover and add his own touches. Today, Precise Wire is here getting it wired and checking another box off the list!

After coming back from the body shop it was time to get the rockers and body armor mounted. This is a little bit of a sl...
07/13/2026

After coming back from the body shop it was time to get the rockers and body armor mounted. This is a little bit of a slow process making sure every piece aligns properly and matches the original body lines.

A complete tear down is what these jeeps had in store. We started with the tan one and took it for a quick trip to San T...
07/11/2026

A complete tear down is what these jeeps had in store. We started with the tan one and took it for a quick trip to San Tan Hot Rods & Auto Body to have some unwanted holes filled in. This is where it will also go back for its paint job.

A custom Campbell Enterprises YJ Hood with a a built in scoop. Normally our YJ hoods do not come with a scoop but this c...
07/09/2026

A custom Campbell Enterprises YJ Hood with a a built in scoop. Normally our YJ hoods do not come with a scoop but this customer placed a customized order and it turned out pretty good looking!

Around this time last year, two 2006 LJ's were brought to the shop by a customer who wanted a build in his fleet that co...
07/09/2026

Around this time last year, two 2006 LJ's were brought to the shop by a customer who wanted a build in his fleet that could do everything, plus a second one to go with it, incase a buddy wanted to tag along!

Since then, these jeeps have been evolving into one of a kind GenRight Tracer builds. So, follow along as we start to share the progress of these rigs.

Effective June 1st, the pricing of our Fiberglass products will be increasing. *Any orders placed on or after June 1st w...
05/01/2026

Effective June 1st, the pricing of our Fiberglass products will be increasing.

*Any orders placed on or after June 1st will be charged the new price.*

Address

12211 S Gilbert Road
Gilbert, AZ
85296

Opening Hours

Monday 9am - 4pm
Tuesday 9am - 4pm
Wednesday 9am - 4pm
Thursday 9am - 4pm
Friday 9am - 4pm

Telephone

+14807825337

Website

Alerts

Be the first to know and let us send you an email when Campbell Ent. Custom Fabrication posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share