Tapped Out

Call Directions Contact the business

Tapped Out Custom Built 500CC 2 stroke dirt bikes

Progress!
09/13/2023

Progress!

Every masterpiece has to start out somewhere!
08/02/2023

Every masterpiece has to start out somewhere!

11/01/2021

Well, I checked prices for CR500 transmissions and cylinders today. Going to be putting a pause on builds for a while till prices come down....$3,500 for a cr500 tr**ny? $2,000 for a used cylinder? Nope.

Up for sale: 2015 KTM// BRC Racing/ SX/500. $11,500 As seen in MXAThis bike was built ground up from a 2015 SXF 250 fram...
10/09/2021

Up for sale: 2015 KTM// BRC Racing/ SX/500. $11,500 As seen in MXA
This bike was built ground up from a 2015 SXF 250 frame. The ONLY used parts on this bike are the frame and transmission. The transmission is a 6 speed XC trans geared like an SX with a 6th gear (you can customize gearing with the gearing commander App) This bike is just like rolling new off the showroom floor, and is built to last with meticulous renovation of all areas. This is one Badass Ride!. Shipping crate available, Local Pickup or Buyer pays for shipping. Texas Title in-hand.

- Brand new engine, built from a BRC Racing engine conversion kit.
- Dual Map CDI
-Frame, stripped and Powder coated
- Swingarm black powdercoated.
- Brand New Tusk Wheel set and Bridgestone Tires
- Brand new 2016 FC250 rear Shock (Newer design)
- Brand New 2019 WP Airforks
- Brand New front and rear brake rotors and pads
-Front Rotor is 270MM Oversize
-Orange Bling Kit
-Anodized Gripper Pegs
- ODI EMIG Bolt on Grips
-All new conversion parts for XC Estart
-2 Antigravity SC1 Batteries
-All New Plastics kit
-Brand new Acerbis Seat
- Brand new Acerbis Handguards
-Brand New Lectron Carburetor
-Acerbus Frame Guards
- Anodized Brake Lever
- Anodized shift lever
- Anodized rear brake caliper and rotor protector
-Battery chargers included
-Holeshot rear link
-XCW Wiring harness allows bike to be easily converted to Enduro with lighting
-Custom graphics
-Rekluse Z-Start pro- Auto Clutch
-Rekluse Clutch cover
- GTI - New High Capacity Radiators - 40% higher capacity than stock

Up for sale: 2016 Husqvarna BRC500. $10,500 As seen in MXAThis bike was built ground up from a 2016 TC250. Details:- Bra...
01/18/2020

Up for sale: 2016 Husqvarna BRC500. $10,500 As seen in MXA

This bike was built ground up from a 2016 TC250. Details:

- Brand new engine, built from a BRC Racing engine conversion kit.
-Frame, stripped and Powder coated Husqvarna Factory Black
- Brand New Tusk Wheel set and Bridgestone Tires
- Brand new 2016 FC250 rear Shock (Newer design)
- Brand New front and rear brake rotors and pads
-Front Rotor is 270MM Oversize
-Blue Bling Kit
-Anodized Pegs
-All new conversion parts for TE250 Estart
-2 Antigravity SC1 Batteries
-All New Plastics kit
-Brand new Gripper seat cover
-Brand New 42MM Kehin Carburetor
-Nihilo Frame Guards
-Skid Plate
-Battery chargers included
-Lowering link included
-TE Wiring harness allows bike to be easily converted to Enduro with lighting
-Custom graphics
-Boyesen Clutch Cover
-Rekluse Torque Drive Clutch for extended clutch life
- GTI - New High Capacity Radiators - 40% higher capacity than stock

This bike is just like rolling new off the showroom floor, and is built to last with meticulous renovation of all areas. This is one Badass Ride!. Shipping crate available, Local Pickup or Buyer pays for shipping. Title in-hand

For out of state Buyers, you would need to arrange for shipping. I will allow a credit of up to $400 against your shipping charges

11/14/2019

I ordered my BRC 500 Kit today from RIley Will at BRC. Donor is a 2016 Husqvarna TC250. Frame will be powder coated the NEW Husqvarna blue. Rockstar kit. OH MY GOD THIS IS GONNA BE BADASS!!!

*******(SOLD)******Recently completed. And up for sale This is a ground up Build of a 2014 Husqvarna TC500. Clean Title....
10/19/2019

*******(SOLD)******Recently completed. And up for sale This is a ground up Build of a 2014 Husqvarna TC500. Clean Title. $9,995. Just like this rolled off the showroom floor. Shipping crate available, Local Pickup or Buyer pays for shipping. Title in-hand
Engine Details:
Engine is a 2004 KX500.
Engine cases are Billet machined from TSR.
Clutch cover is Billett Machined TSR
Boyesen, high volume water pump
TSR billet exhaust valve cover
Exhast Valve cover is Billett TSR
Clutch Cover is Billett TSR
Brand New PowerDynamo ignition wth Ligting coil
Rebuilt Crank from Millenium Technologies
Brand New replated Nikasil Cylinder
New Wiseco Piston Kit
Rebuilt Clutch
Billett Machined CR500 Exhaust Adapter
Lectron (XTNG) Self Adjusting billet machined carburetor
Other Details
Brand New Procircuit Pipe
Brand New Pro Circuit TI6 Muffler - Spark Arrestor
Blue Bling Kit
Front 270MM Oversize rotor - New
New rear brake rotor, brake pads front and rear
New Tusk Rims and Bridgestone tires
Blue Bling rim locks
Rockstar Graphics kit
Brand New Gripper Seat cover
Brand New Plastics kit
Husqvarna Blue folding levers
Blue Anodized Rear Brake rotor guard
Acerbis front brake rotor protector
Wide Blue anodized footpegs
Blue Anodized folding tip brake pedal
Blue anodized folding tip shift lever

06/23/2018

What’s the next project? Hmmm? 2016 husqvarna cr500?

Address

Gig Harbor, WA
98335

Telephone

+12068835207

Website

Alerts

Be the first to know and let us send you an email when Tapped Out posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Tapped Out:

Shortcuts

Share

Category