Riner's Wrenchin

Riner's Wrenchin Any where from 18 Wheelers, to cars. We work on them all. No job to big, or to small or OEM factory specs.

to full blown race cars an tractor pull trucks.We can build them all.

Got this 06 ford f-350 6.0 powerstroke daully in for rear pads. Got this work truck done.
04/12/2022

Got this 06 ford f-350 6.0 powerstroke daully in for rear pads. Got this work truck done.

Finished another 03 international 4700 with a 7.6l dt466. This was in for a timing case cover, cam, cam gear, top half o...
03/25/2022

Finished another 03 international 4700 with a 7.6l dt466. This was in for a timing case cover, cam, cam gear, top half overhaul, high pressure oil pump, low pressure oil pump, crank gear, tune, an stacks. #4700

Riner Wrechin apologize for not posting alot lately just slammed. Anyways had a 08 peterbuilt 365 with a c15 Acert motor...
03/23/2022

Riner Wrechin apologize for not posting alot lately just slammed. Anyways had a 08 peterbuilt 365 with a c15 Acert motor dump truck stop in for a oil change, Front brakes, all filters, turn signals needed fixed

Got a 1984 international S2200 with a N-14 select. Got it in for a PT injection pump, due to leaking bad. Got everything...
03/17/2022

Got a 1984 international S2200 with a N-14 select. Got it in for a PT injection pump, due to leaking bad. Got everything off now we wait 3 weeks for a rebuilt pump.

Had a military 10 ton 6x6 in for a injection pump, bypass military fuel filters. Got her all done for this customer an n...
03/16/2022

Had a military 10 ton 6x6 in for a injection pump, bypass military fuel filters. Got her all done for this customer an now she's headed back, down south.

Had a 2000 mack vision 460 in yesterday for a blower motor resistor, because the blower motor would only work on setting...
03/13/2022

Had a 2000 mack vision 460 in yesterday for a blower motor resistor, because the blower motor would only work on setting 4.

Finished this 03 international 4300 466e up. This truck got new input shaft, input shaft bearing, along with seals, clut...
03/10/2022

Finished this 03 international 4300 466e up. This truck got new input shaft, input shaft bearing, along with seals, clutch, clutch brake, throw out bearing. Let's get it back to the customer.

03/07/2022

Just finished up with a 89 western star with a 3406b overhead overhaul. She's all good to go now heading back to Texas now.

Got a 97 Peterbuilt 379 with a 3406B in today for a couple lines leaking, injection pump reseal, oil change, fuel filter...
03/06/2022

Got a 97 Peterbuilt 379 with a 3406B in today for a couple lines leaking, injection pump reseal, oil change, fuel filters, an check kingpins. #3406

Just finished up this job on a 2005 international 4300 446e in for a high pressure injection pump, low  pressure oil pum...
03/06/2022

Just finished up this job on a 2005 international 4300 446e in for a high pressure injection pump, low pressure oil pump, injectors, timing case cover, Front main seal, an a pm service.

Had a GMC c7500 chipper truck in today for all new rotors, brake pads, bearings, hub seals, gear oil flush.             ...
03/02/2022

Had a GMC c7500 chipper truck in today for all new rotors, brake pads, bearings, hub seals, gear oil flush.

Had a 04 f-350 6.0 powersroke in for injector  #1. Found oil of containment in the fuel an oil, to include water. Custom...
03/01/2022

Had a 04 f-350 6.0 powersroke in for injector #1. Found oil of containment in the fuel an oil, to include water. Customer diened flushing the fuel, or any other procures. But the truck does run alot better now

Address

60 Mountain View Drive
Front Royal, VA
22630

Opening Hours

Monday 6am - 9pm
Tuesday 6am - 9pm
Wednesday 6am - 9pm
Thursday 6am - 9pm
Friday 6am - 9pm
Saturday 6am - 6pm

Telephone

+15406227830

Website

Alerts

Be the first to know and let us send you an email when Riner's Wrenchin posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Riner's Wrenchin:

Share