Car Guru

Car Guru Over 33 years experience. check engine lights, brakes, suspension, timing belts, water pumps, electri

I know i haven't posted anything in a while. That doesnt meen i have been slow. Just the opposite. Here is acarbon fiber...
07/05/2023

I know i haven't posted anything in a while. That doesnt meen i have been slow. Just the opposite.
Here is acarbon fiber engine containment pan i made for my 95 beretta. Diapers are fine once installed but a pain to take off and put on in the beginning and end of the season. I make pans for a lot of people but never made one for myself, until now.
Man how i love to create stuff
Built not bought baby

Just a small crack repair. Picknick table got the better of me in Miami this year. I think i am getting good at this b...
04/14/2023

Just a small crack repair. Picknick table got the better of me in Miami this year. I think i am getting good at this blending stuff. Now to do some peeling clear coat repair next

Got to do some work on the beretta this weekend. Had a cam going south. Pulled the motor out stripped it down cleaned e...
08/17/2021

Got to do some work on the beretta this weekend. Had a cam going south. Pulled the motor out stripped it down cleaned everything and rebuilt it with a new Steve Schmidt cam and new 904 lifter. Not bad for a weekends work. Now off to the divisional at epping on Thursday

2007 Yamaha Road Star 1700.Very clean bike with low milage. Just put new plugs in it and flushed tbe fuel system with f...
07/10/2021

2007 Yamaha Road Star 1700.
Very clean bike with low milage. Just put new plugs in it and flushed tbe fuel system with fresh gas ethanol free.. It has been sitting garaged for the last 3 years. Runs mint now. Looking to sell it but not give it away.
I will recheck it next time I'm over but I think it had 2700 miles on it.
$5,000 or best reasonable offer.
Reach out here or call my cell
six 03. 303. 3 six 46. Chuck

I haven't posted in a while that doesn't mean I haven't been busy.Picked this gem up a couple weeks ago. Its a 1998 s...
07/10/2021

I haven't posted in a while that doesn't mean I haven't been busy.
Picked this gem up a couple weeks ago. Its a 1998 sea doo gtx limited with the 958cc motor.
It's been sitting for 9 years. The complete fuel system had to be gutted and cleaned with all new lines and shut off valve. Pulled the carbs apart and rebuilt them. Change the jet pump oil and cleaned all the mold from the insides. The previous owner left the drain plugs in and there was a foot of water inside it and all sorts of mold. It has 120 hours on it. After 20 hours of cleaning and stuff it runs. I need to find water somewhere to test the rest of it.
Also looking for a rear seat if anyone has a connection for stuff like this.

Building a new heart for the slow poke duster of jack Webster. Dart little M block 427 cubes 14.5 to 1 compression with...
07/21/2020

Building a new heart for the slow poke duster of jack Webster. Dart little M block 427 cubes 14.5 to 1 compression with brodix track 1 heads and a .767 lift cam. The old heart had given up its last breath and broke a rod

New car coming out of the stables soon. Her name is SECTION 8. it's been almost 5 years since this project started and I...
07/21/2020

New car coming out of the stables soon. Her name is SECTION 8. it's been almost 5 years since this project started and I cant believe the light at the end of the tunnel is here. My nephew Steven is the owner and wheel man. We even did a little street testing today. Waiting on a window net from stroud and off to test we go

Laying up some carbon for door panels on the Section 8 mustang
10/26/2019

Laying up some carbon for door panels on the Section 8 mustang

The look on my nephew's face the first time he sees the dash all back together,,,,,,,,,priceless This thing has some rea...
09/29/2019

The look on my nephew's face the first time he sees the dash all back together,,,,,,,,,priceless
This thing has some really cool stuff. ARC switch panel and relay kit. Great piece to work with. Light weight steering column and wheel with sfi cert quick release hub. Brake booster delete. Mega 450 delay box. simple reliable 6al with a 2 step rev limiter. Egt sensor with play back.
I Flush mounted the tach. And a set of pro comp gauges and shift light tucked where the original gauges were. All the wiring is gm weather pack connectors and labeled shrink tube on all the wires. Rounded out with a big boy 18 inck kirky seat and a 5 gallon fuel cell in the rear. Wait till you see the art work going on the battery box and fuel cell box. Next for me is to start wiring up the engine bay and front lights. I'm thinking of relocating the headlight harness behind the fender.

While we were out on our 50 state adventure this was home and still will be for another 8 months or so. While on our tri...
09/11/2019

While we were out on our 50 state adventure this was home and still will be for another 8 months or so. While on our trip the temps would climb higher than I would like on long hill climbs especially the 11,000 foot ones. It took over 9 hours to get the cooling pack out of the bus but I did find the Lower corner weeping. Ordered up a new one and sent the charge air cooler out for a pressure test. While the ac is discharged I pulled off the lines at the compressor where there was a sign of a leak only to find some previous technician had torn the oring putting the line on.

We have been gone for a year and this bad boy has been in deep storage for almost 2 years. Rockers back on valves all ad...
09/11/2019

We have been gone for a year and this bad boy has been in deep storage for almost 2 years. Rockers back on valves all adjusted and it lit right off. Some fresh seatbelts and gas and away we go

Address

94 Danville Road
Fremont, NH
03044

Telephone

+16033033636

Website

Alerts

Be the first to know and let us send you an email when Car Guru posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share

Category