Totally-Baked Powdercoating

Totally-Baked Powdercoating 118 Cycle Dr.
Freedom, PA 15042

Refinishing Company for:
Automotive
Home Finishing's
Industrial and Commercial applications

Another heavily corroded wheel make over with dismount remount and balance in house / chemical stripping / sandblasting ...
05/29/2026

Another heavily corroded wheel make over with dismount remount and balance in house / chemical stripping / sandblasting / primed / silver mid base coat / clear!

Two toned g8x intake manifold finished up for our friends over at TPG Tuning
05/28/2026

Two toned g8x intake manifold finished up for our friends over at TPG Tuning

All 3 of these wheels are the same base coat color! Just different clears 😎. Which one are you going with?
05/16/2026

All 3 of these wheels are the same base coat color! Just different clears 😎. Which one are you going with?

We had the opportunity to be involved in University of Pittsburgh Formula SAE - Panther Racing new FSAE car they have be...
04/19/2026

We had the opportunity to be involved in University of Pittsburgh Formula SAE - Panther Racing new FSAE car they have been building and it was unveiled yesterday! Here’s to a super successful racing season.

Things have been absolutely hectic here lately on large industrial jobs on top of walk in’s ontop of all the dealerships...
04/08/2026

Things have been absolutely hectic here lately on large industrial jobs on top of walk in’s ontop of all the dealerships we’ve been doing work for!

All this week we are in the process of coating these trash cans for the city of Pittsburgh which are 300lbs a piece and need all disassembled / re-assembled.

Last week was a large order for a good customer our ours as well which was thousands of pieces.

We appreciate all the support and it’s been insane to see the growth over this last half year. We are completely tapped on room but looking foward to see where things go in the next year or 2!

Happy Easter everyone! Here are some pieces we did for Grade-A-Garage shop m240 that they set the record at tx2k! Crazy ...
04/05/2026

Happy Easter everyone! Here are some pieces we did for Grade-A-Garage shop m240 that they set the record at tx2k! Crazy to see the progress on this car in such a short time. Thanks for allowing us to be apart of the build!

Intercooler / rad / turbo / piping / light blue parts all coated by us!

Our good friends over at Autoaccenting are selling this beautiful Can Am that we coated nearly everything for! Hit them ...
04/02/2026

Our good friends over at Autoaccenting are selling this beautiful Can Am that we coated nearly everything for! Hit them up for more information!

How about the worst set of wheels that came in that we’ve seen in the 13 years of us coating! Surprised they turned out ...
03/14/2026

How about the worst set of wheels that came in that we’ve seen in the 13 years of us coating! Surprised they turned out as good as they did, mind you there is still a ton of uneven-ness / pitting / casting flaws from all the corrosion but the metallic silver does a good job of hiding that and we were able to bring them back to some what of a better life in the future!

Finished up some Honda side case covers in a two tone metallic grey / metallic black combo with clear. The customer was ...
03/08/2026

Finished up some Honda side case covers in a two tone metallic grey / metallic black combo with clear. The customer was extremely patient with how busy we were so figured I’d surprise him with the two tone ☺️

Appreciate all the support and patience with everyone. We’ve been so incredibly slammed the last 6-7 months it’s been impossible to stay on track.

We have also been working on adding another spray booth for Cerakote only / and hope to have our polishing machines finally dialed in this spring time.

Quite a bit of high heat Cerakote going out last week!
02/18/2026

Quite a bit of high heat Cerakote going out last week!

Bunch of Matte purple parts and a couple cherry red metallic parts finished up for Nick’s badass quad build for this sea...
02/16/2026

Bunch of Matte purple parts and a couple cherry red metallic parts finished up for Nick’s badass quad build for this season!

Always appreciate the work!

Address

118 Cycle Drive
Freedom, PA
15042

Opening Hours

Monday 10am - 4pm
Tuesday 10am - 4pm
Wednesday 10am - 4pm
Thursday 10am - 4pm
Friday 10am - 4pm

Alerts

Be the first to know and let us send you an email when Totally-Baked Powdercoating posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Totally-Baked Powdercoating:

Share