MBS Manufacturing. Inc.

06/05/2026

Made in USA!
Inner Cam Bearing Installer & Puller Compatible with Harley Davidson TC 88 96 103 110 ALL Twin Cam & Dyna

SKU:HPTC96-C29 + HPTCAA-A29
https://mbsmfg.com/HPTC96-C29-HPTCAA-A29/

Set of Inner Cam Bearing Puller and Installation Tools compatible with Harley Davidson Twin Cam and Dyna models.
Compatible with all TC88, 96, 103 and 110s that use the B148 or the B168 bearings.

06/04/2026

Made in USA!
SKU:B34
https://mbsmfg.com/B34/

Set of Inner Camshaft Needle Bearing Installer.
Designed for Harley Davidson Milwaukee Eight (M8).
Function: This set is specifically designed for installing the camshaft needle bearings.
Material: This inner bearing installation tool set is made of high-quality 1045 cold rolled steel, which is sturdy and durable. Tool comes with black oxide coating for years of use.

06/04/2026

06/03/2026

Made in USA!
Main shaft sprocket wrench tool for the 1 7/8" nuts with a threaded bushing.
Designed for: Harley Davidson 1936-2006 Big Twin and 1999-2006 Twin Cam Models, except 2006 Dyna.
SKU:MSWTC8-E12
https://mbsmfg.com/MSWTC8-E12/
# #

06/02/2026

Made in USA!
https://mbsmfg.com/DNST40SA-B20-DCAT98-C19-D25AAT-E19/
SKU:DNST40SA-B20 + DCAT98-C19 + D25AAT-E19
This is a combination of three tools: 46/40mm socket, Chain Adjusting Tool and Front Axle Alignment Tool.

46/40mm Steel Rear Axle Socket Tool compatible with Ducati 748, 916, 955, 996, 998, S2R, S4R, Multistrada MH900E, Hepermotard, and Multistrada. This is a combination of two tools: 46mm socket for the rear wheel nut, and 41mm socket for the sprocket retainer nut. Because it's steel, the tool will last a lifetime, and will not damage your bike parts!

Front Axle Alignment tool. The diameter of the tool is 25 mm. Tool is compatible with Ducati 748 749 916 996 998 999 ST2 ST3 ST4 800SS 1000SS and any other Ducati with a 25mm diameter axle. Bikes with Ohlins forks need a different tool, since they do not have a notch. The axle alignment tool is necessary to keep the notch in the axle lined up with the notch in the fork bottom when tightening the front axle nut. The alignment is needed to have access to the compression adjustment screw. The tool is made from 6061 aluminum with a hardened dowel pin and a roll pin.

Aluminum Chain Adjusting Tool compatible with Ducati 1098 & 1198 and MV Agusta! This tool is a must, for any owner. Because it's aluminum, the tool is light weight, and will not damage your bike parts, but will last a lifetime!

06/01/2026

Made in USA!
SKU:HDPDLT-A14
https://mbsmfg.com/HDPDLT-A14/
Primary Drive Locking Tool.
Application: this primary locking tool is compatible with Harley Davidson 1941- 2006 Twin Cam models.
Function: this primary drive locking tool is specially designed to lock the primary drive to remove or install the motor sprocket and clutch hub nut. Will fit most Primary Drives.

06/01/2026

05/29/2026

SKU:ICBTCSDI-D30 + ICBTCPS-B30
https://mbsmfg.com/ICBTCSDI-D30-ICBTCPS-B30/
Inner Cam Bearing Puller and Installation Tools Set.
Compatible with Harley Davidson Twin Cam and Dyna models. Compatible with all TC88, 96, 103 and 110s that use the B148 or the B168 bearings.
This set will remove and install the inner cam bearings on both newer and older model Twin Cams and Dyna Harleys.

05/28/2026

Made in USA!
SKU:PM1415-A1
https://mbsmfg.com/PM1415-A1/
Flywheel Puller 14mm x 1.5mm Tool Right Hand Threads. The following is for reference only. Please check the thread size of your motor before ordering.
Compatible with Hоnda: most XR/XL185, XR/XL200, XL125, CB125, ATC200 & Big Red SX185S models.
Compatible with 2002 Suzuki GS500.
Thread Size: 14 mm x 1.5 mm;
Thread Direction: Right Hand.

05/27/2026

Made in USA!

Primary Drive Locking Bar Tool. The Tool is 5.625 inch Long.
Compatible with Harley Davidson 07 to Present 6 Speed FLHR, FLHX, FLHT, FLTR models.
Functions: this tool is designed to keep the primary drive sprockets from rotation during the installation and removal process. The tool is easy inserted into the primary drive sprockets to restrict the movement. Allows engine and clutch nuts to be easily removed and retorqued for primary service work.

SKU:PCLB5625-D8
https://mbsmfg.com/primary-drive-locking-bar-for-harley-davidson-D8/