K & S Auto Inc.

Call Directions Website Contact the business

K & S Auto Inc. K & S Auto Body has been in business since 1978, and we're experienced repairing all types of cars a

05/02/2024

If you are wanting the underside of your vehicle blasted, give us a call. We have the skills and equipment for performing this type of work, so you can have every section of your car or truck thoroughly prepped and ready for recoating.

04/30/2024

If you have welded on new metal to fill holes or to repair oxidized patches, the weld joints need to be smoothed. A cutoff wheel should be used first to bring flatten out and level the surface, then finish with a grinding and smoothing pad.

04/25/2024

Has your vehicle experienced an unfortunate accident? Has its appearance seen better days? We can restore your vehicle to its once pristine condition. Contact us today for a quote.

04/23/2024

Did you know the deepest wet weld recorded is further than 1500 feet? The Navy actually performed this wet weld in 2005, setting the record about 2,000 feet deep, and wet welding is exposed directly to the surrounding waters.

04/18/2024

Have you thought about customizing your ride? By adding a splash of color to your car, you can make an incredible difference in its look. From pinstripes to logos, we have the solutions you are looking for.

04/16/2024

Automotive paint history: When acrylic enamels were introduced, they provided the high gloss finish of alkyd enamels without the required buffering.

04/11/2024

Custom car paint was mostly lacquer-based in the 1930s and stayed that way until the 1960s. Lacquer paint, still in use today, is relatively inexpensive, goes on fairly well, and yields a good shine. The downside is that, since it’s a softer type of paint, it is more susceptible to chipping and fading with time.

04/09/2024

The most common method for applying auto body paint is the HVLP spray gun. Gravity and an air compressor feed paint at a steady rate into the gun, which delivers a consistent paint stream with greater precision and efficiency.

04/04/2024

So how exactly does the paintless dent removal process work? Basically, this form of bodywork approaches the damaged area from the inside. The technician will apply the proper shape and amount of pressure in order to “pop” out the dent and restore the original contour of the car.

04/02/2024

If you are painting a car for the first time, before you start, it is recommended that you practice your spraying technique on a piece of scrap steel. Hold the spray gun approximately six inches from the panel, and spray in a side-to-side sweeping motion.

Address

67 Beaver Street
Framingham, MA
01702

Opening Hours

Monday 7:30am - 5pm
Tuesday 7:30am - 5pm
Wednesday 7:30am - 5pm
Thursday 7:30am - 5pm
Friday 7:30am - 5pm

Telephone

+15088729452

Website

Alerts

Be the first to know and let us send you an email when K & S Auto Inc. posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to K & S Auto Inc.:

Shortcuts

Share

Category