Midnight Welding LLC

Midnight Welding LLC Certified by The American Welding Society in GMAW ER70S, GTAW 304ss, GTAW A-36, SMAW E-7018, FCAW E-71T. Worked in metal and fabrication field for 15+yrs.

I'm a stay at home dad who does welding on the side. I can fabricate almost anything or have the means to get what needs to be done. I worked at a local welding shop for years and also a machine shop working on mostly motors.

Sorry I haven't been posting, been doing another job lately. Here's a quick job I just finished. Added some LED lights t...
05/05/2015

Sorry I haven't been posting, been doing another job lately. Here's a quick job I just finished. Added some LED lights to the front of a ATV. I think I used as much shielding has to weld as I did purging the system when I was done,lol.

I don't just weld. Today I fixed some semi bumpers that had been torn off. They were in bad shape but was able to salvag...
10/27/2014

I don't just weld. Today I fixed some semi bumpers that had been torn off. They were in bad shape but was able to salvage them.

Building a rack for the recumbent bike. Greg has logged about a 120 miles a week going to work and home.
10/27/2014

Building a rack for the recumbent bike. Greg has logged about a 120 miles a week going to work and home.

I took 2nd place in the I-beam cutting contest out of 40 people.
10/18/2014

I took 2nd place in the I-beam cutting contest out of 40 people.

I've done a few backrest lately. This customer requested a shorty. There was demolished. Made this one out of their bott...
09/19/2014

I've done a few backrest lately. This customer requested a shorty. There was demolished. Made this one out of their bottom mounts with a new top. Much cheaper than a new one.

Installation of a lift skirt today. Folds up very nice.
08/17/2014

Installation of a lift skirt today. Folds up very nice.

FD is off the rotisserie and I'm starting to mock up the parts that are going back on.
08/03/2014

FD is off the rotisserie and I'm starting to mock up the parts that are going back on.

Almost done with the recumbent bike.
07/27/2014

Almost done with the recumbent bike.

The red is almost gone.
07/23/2014

The red is almost gone.

Finished prepping rear of the RX-7 for fuel cell. Thanks Jason for the advise.
07/12/2014

Finished prepping rear of the RX-7 for fuel cell. Thanks Jason for the advise.

Doesn't get much easier then this. I couldn't even charge the customer for it :)
07/08/2014

Doesn't get much easier then this. I couldn't even charge the customer for it :)

Address

Florissant, MO
63031

Website

Alerts

Be the first to know and let us send you an email when Midnight Welding LLC posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share

Category