10/06/2026
SLASHSTREET STOCK RULES
Must use stock Traxxas Slash 2wd chassis and components, unmodified, unless otherwise specified. No modifying, replacing, or removing any components unless otherwise specified.
All suspension components must be installed in the proper position and orientation on the car from the factory (EXAMPLE: Left caster block on the left; right block on the right, suspension arms right side up, etc.).
Any color Traxxas Slash aluminum steering bell cranks ( #3743), caster blocks ( #3632), steering blocks ( #3636), camber links, and rear axle carriers ( #3652) are allowed
RPM rear carriers ( #80382), front steering blocks ( #80372), caster blocks ( #80712), and front ( #80952, #80953, #80955) & rear ( #81002, #81003, #81005) bumpers will be allowed. Must run the Traxxas 2wd Slash rear bumper. (Stock or RPM) The "hoop" and "ears" on the front bumper may be cut off; however, the main area of the bumper must remain intact (unless you are running a body manufactures front body mount/bumper.
Transmitter/Receiver and servo may be replaced. (Servo saver will also not be a tech item) Traxxas Aluminum Steering Bellcranks (3743A and 3743X)
Locking or modifying the differential in any way will not be allowed. The differential must have normal diff action when rotating one rear tire against the normal compression (resistance) of the motor. No ball diffs.
Max Gear Rule
You can run any Traxxas 2wd Spur gear, but will be limited to how big your pinion gear can be. Listed below are the biggest pinions you can run with each spur gear for each motor option.
12T Titan Motor
90/22
86/21
83/20
76/19
BL2 Motor
90/21
86/20
83/19
76/18
NO SWAY BARS
No additional weight may be added. The ESC, transponder, and receiver can be mounted anywhere in the main chassis plate area only.
Minimum Ride Height: .750" (including body).
Motor, ESC, & Battery: Must use the stock XL-5 ESC (unaltered) & unaltered Titan 12t 550 brushed motor OR the BL2 brushless system. Tuning, tweaking, or modifying the motor in any way will not be allowed. The stock (bullet) connectors from the motor to the ESC must also be used. Soldering the connectors together is not allowed. No cooling fans on the motor or esc.
Battery: Max charge of 8.44V, Stick Pack Only and hard case only.
Battery must be mounted in the stock center tray location, but can be moved forward or back as long as it stays within the stock boundaries of the battery tray. Any plug may be used for the battery to ESC connection. However, direct soldering to the battery will not be allowed.
Tires, and wheel hex can use proline hot laps de non grooved komos wheels must be on the front and rear wheels on the rears. 19mm offset Front 21.5mm offset rear. Each wheel must have a minimum of two vent holes, and must be stamped with the offset label. Altering the inside of the tire, foam or wheel in any way will not be allowed. This includes adding weight for balancing reasons. However, gluing or taping the outside of the tire to help prevent traction rolling will be allowed. -Tires cannot be ground down to slicks.. -One foam insert per tire only.
Wheel hexes must remain stock. Grey on the front, black on the rear.
Shocks & Springs: Any Slash tuning spring by Traxxas will be allowed. Springs may not be cut or altered from factory in any way. Aluminum shock caps (any color) are allowed. The shock oil or shock travel/length will not be mandated. 2-stage pistons or any modification to the shock piston to tune the compression and rebound separately will not be allowed.
If it doesn’t state that you can use or do it to the car it’s NOT ALLOWED!
-Traxxas LCG chassis kit is legal. -RPM Transmission case is NOT allowed -Approved part list: RPM-80712, 80832, 80852, 81002, 81003, 81005, 80902, 80905, 80372, 80382, 80244, 80249, 80599, 73752, 80592, 80595, 80594 -All Brands of Aluminum shock caps that fit on the stock shocks STRC- ST3640S, ST3640BK.
-All parts that Traxxas make for the 2wd electric slash are allowed.
Bodies:
Dirt Oval Street Stock Style Body allowed. Absolutely NO drag bodies converted over to a dirt oval body. Short Course Street Stock Dirt Oval bodies ONLY.
-Decking is allowed
-------- DECK-------
-1” Max Deck Rake
------ROOF-------
5” Max Roof Rake measured from the deck
------Spoiler-------
-Total length of spoiler from deck to top of spoiler may NOT exceed 1". Spoiler must resemble a full scale dirt oval spoiler. No wicker style spoilers out the back of the car.
-Spoiler to be no wider than the sides of the body
-Factory cut lines MUST be used. Absolutely NO altering fenders, hoods, deck height, roof or deck rake, ect.
