Death Row Performance

Death Row Performance Late Model GM Performance, Diagnostics, Tuning, and Repair

Top notch work as usual👌
11/05/2022

Top notch work as usual👌

10/07/2022
09/27/2022

Mark Your Calendars! Come Get Your Loaded Teas & Smokin Firehouse BBQ Before The Football Game!! I Promise You Do Not Wanna Miss This!!! No Pre Orders!!! Oct 7th 3pm Till Sold Out

09/25/2022

Something about a Gen V 6.2 😈

We will consider selling this one as-is if a reasonable offer is made. Otherwise, we will start fixing it up to our stan...
08/10/2022

We will consider selling this one as-is if a reasonable offer is made. Otherwise, we will start fixing it up to our standards in the coming weeks after we knock out some of our bigger projects. Just don't have the expendable time right now.

5.3 factory V8
Camshaft/supporting hardware
Yank 3000 stall installed in house
Built 60E
4.10 gears
Posi unit
Braided fuel lines
DRP custom tune

Truck needs a good bit of TLC, 90% cosmetic stuff. Please don't waste our time

***Truck is sold*** Thank you all for sharing!2000 GMC Sierra 2500hd 4x4180,000 milesLoadedClean titleIce cold A/CNew ti...
08/10/2022

***Truck is sold***
Thank you all for sharing!

2000 GMC Sierra 2500hd 4x4

180,000 miles
Loaded
Clean title
Ice cold A/C
New tires
Clean Interior
All new fluids
Tastefully/practically modified

6.0L LQ4 engine
4L80E transmission recently rebuilt
NP246 auto transfer case
14 bolt full floating rear differential
9.25" front differential
4.10 gear ratio

When we bought this truck it was completely stock and all original. We had to disassemble the engine to address some oil leaks and figured we'd throw some parts on to make it a little more pleasurable to drive and tow with. The truck has a ton of new parts and also recieved a few take-off parts with less miles. We got a little carried away with it but it's going to be a good truck for someone.

Ls2 camshaft/valve springs
Ls2 front cover w/ cam sensor relocation
Ls1 241 cylinder heads w/ 70k miles
High pressure oil pump w/ copo spring
New Ls7 lifters/trays
New pickup tube o-ring
New timing cover gasket/seal
New MLS exhaust manifold gaskets/bolts
New MLS head gaskets/bolts
New harmonic balancer bolt
New oil pan gasket
New camshaft retaining plate
New valley cover gasket
New valve cover gaskets/grommets
New knock sensors/harness
New intake manifold gaskets
Low mile timing chain/sprockets
Ported throttle body
Longtube headers w/ custom 3" y-pipe
Complete Duramax 4" exhaust system
New fuel filter
New spark plugs/wires
New 34" radiator
High output dual electric fans
3 relay electric fan harness pinned to ECM
New windshield wipers
New brake pads
New Maxxis Buckshot tires 95% tread
New serpentine belt
A/C tensioner delete w/ stretch belt
New A/C compressor
New or***ce tube and schrader valves
Fresh A/C recharge
New headlights w/ LED bulbs
New lower valence
New fog lights
New LED license plate lamps
New tailgate bezel
New upper right control arm/ball joint
Lower mile front diff w/ new axle seals
Low mile water pump/thermostat
Full interior LED lighting upgrade
LED 3rd brake light bulbs
Power seats/mirrors
Aftermarket radio w/ upgraded speakers
High output alternator upgrade
Gooseneck hitch
7-pin trailer connector
New bed rail caps
Thorough undercarriage wash

Currently has custom 87 octane performance/towing tune (can make more power on 93 octane, per buyer request)

Bads:
-Bed floor has some rust towards the very front due to a fuel tank leaking in the past.
-Clear coat is peeling on hood and roof
-Dash has a couple cracks but not bad
-Could use a paint correction
-Has some dents and dings but it's what youd expect from a 20+ year old truck that was used to work.

We have alot of time and money invested in this build. No stone left unturned. First come, first serve. No buddy deals.

$9,500 obo
Clean blue title
Will entertain trades or partial trades

Coming to a street near you 👀 Just a little teaser for what's to come.
07/08/2022

Coming to a street near you 👀
Just a little teaser for what's to come.

06/09/2022

First taste of 🌽

We are still not accepting any new work and will not resume until our current projects are 100% completed. We have custo...
06/08/2022

We are still not accepting any new work and will not resume until our current projects are 100% completed. We have customer parts stacked in storage bins several feet high around our shop and simply cannot accomodate any new customers or new projects at this time.

We strive to be a service that all of you can lean on but unfortunately we do not have the means at our current location without sacrificing quality for quantity.

We will not be responding to calls, messages, emergencies, or any form of inquiries during this period as we desperately need this time to complete our current projects and projects that are already scheduled throughout the coming weeks.

Please do not reach out to my personal page for any business related inquiries. We hate to do this and we're sorry in advance for any inconveniences.

Thanks for understanding.

03-07 Chevy/Gmc Gauge ClusterRefurbished 140k mile cluster ready to go. All new stepper motors, LED lighting, and new cl...
05/27/2022

03-07 Chevy/Gmc Gauge Cluster

Refurbished 140k mile cluster ready to go. All new stepper motors, LED lighting, and new clear lens + 90 day warranty.

$225, trades welcomed.

Listen up 🗣If your filter/regulator is installed on the fuel rail - there's a 99% chance it looks like this. Bent, kinke...
05/02/2022

Listen up 🗣

If your filter/regulator is installed on the fuel rail - there's a 99% chance it looks like this. Bent, kinked, and pathetic.

Although this may be the easy way, this is not the correct approach to converting a return style fuel system to returnless🤦‍♂️

We are offering plug and play fuel line kits for NBS trucks to correct this issue the right way and to help those doing a V6-V8 conversion, 07+ intake manifold swap, 90mm TB swap, etc.

Our kits will locate the corvette style filter/regulator to the factory fuel filter position.

Not only will this kit help you achieve consistent regulation and fuel flow to the injectors, it will also eliminate the use of 2 filters and reduce the chance of engine bay fires caused by fuel leaks by over 60%.

Our kits will include:

3/8" braided fuel line cut to length
-6 AN fittings installed on hose ends
All necessary quick connect EFI fittings
New AcDelco filter/regulator
Free installation support

These kits can be installed in less than 30 minutes by any mechanically inclined individual. All hoses will be plug and play and cut to length according to your specific application.

Address

360 FM 105
Evadale, TX
77615

Website

Alerts

Be the first to know and let us send you an email when Death Row Performance posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Death Row Performance:

Share