Sullivans garage & fabrication

Sullivans garage & fabrication Sullivans garage does custom fab work, roll cages, service/mechanical work & transportation!

I am here to help with you're vehicle issues, I also can provide welding fabrication for performance parts. available for anything from small brake change, oil change jobs in you're everyday driver all the way up to custom turbo fabrication parts on your street or race car, roll cages. helping even more with transportation of your vehicle to Sullivans garage, back to delivery at your driveway when your project is finished!

I'd like to say thank you!Thank you to all the customers that have trusted me with whatever project they had me involded...
07/21/2024

I'd like to say thank you!

Thank you to all the customers that have trusted me with whatever project they had me involded in. I am very much appreciated for your support!

I am sorry to say that I will be closing my doors indefinitely starting 7/21/24 today!

Thank you for the understanding. I hope everyone has enjoyed their custom work from Sullivans garage.

Finished up the intercooler pipes today. They turned out pretty good! On to the 3.5" hood exit!!
06/22/2024

Finished up the intercooler pipes today. They turned out pretty good! On to the 3.5" hood exit!!

Look what we got here! Super rare VW in for some exhaust work and intercooler pipes! Anyone knows me they know I have a ...
06/22/2024

Look what we got here!
Super rare VW in for some exhaust work and intercooler pipes! Anyone knows me they know I have a soft spot for vw and the master VR6 engine!

The wife wanted her evo 10 a little louder. So I went ahead and removed the aftermarket muffler and built a replacement ...
04/14/2024

The wife wanted her evo 10 a little louder. So I went ahead and removed the aftermarket muffler and built a replacement without one! Sounds great. Not to loud not to quiet.

Finished up Austin's crv.Added on to charge system ✔️ Wastegate recirc back into exhaust ✔️ This thing is about to go st...
04/11/2024

Finished up Austin's crv.
Added on to charge system ✔️
Wastegate recirc back into exhaust ✔️
This thing is about to go stealth mode on the streets near you soon enough!
Ready for pick up 🛻

Out with 1 in with another! Turbo k series crv in for some intercooler piping and a wastegate dump!
03/31/2024

Out with 1 in with another! Turbo k series crv in for some intercooler piping and a wastegate dump!

Been silent for a while! But here is a turbo Mazda truck I did some work on a while ago. Came back for a updated down pi...
03/30/2024

Been silent for a while! But here is a turbo Mazda truck I did some work on a while ago. Came back for a updated down pipe for his new turbo/manifold.

He needed to get his intercooler pipes built also! Sweet little truck!

Yes I'm still doing fab work! Small jobs are nice but still if you need roll cages or tubed work done lmk!!!Built this m...
03/12/2024

Yes I'm still doing fab work! Small jobs are nice but still if you need roll cages or tubed work done lmk!!!

Built this manfold for my buddy's Mazda truck few years ago along with his -12AN cooling system, full 3" stainless exhaust. Will be doing intercooler piping soon also!

He wanted to make it work with his stock location down pipe so he can switch out turbo kits at easy. Did a adapter pipe for the new pte 5858 turbo set up. Gonna redue the waste gate pipe to fit the flow of exhaust better then plum the dump tube back into the adapter down pipe!

Cool little truck! Goal is to enjoy it this summer but he wants to make a little bit of power 300-400ish HP would be a riot!

Buddy dropped off his cobalt!This is getting a custom build turbo manifold, downpipe and some subframe modifications for...
05/28/2023

Buddy dropped off his cobalt!
This is getting a custom build turbo manifold, downpipe and some subframe modifications for the awd system it will ne using!

Looking to break the record on this car, will be exciting to see this once it's all finished doing work!

My bro Bob needed a exhaust built for his turbo Mazda mini truck!Got his hooked up with a 3" downpipe to exhaust out the...
05/21/2023

My bro Bob needed a exhaust built for his turbo Mazda mini truck!

Got his hooked up with a 3" downpipe to exhaust out the side of the box. Tear drops aren't my specialty but I tried lol

Next I am doing an lines for his coolant system. This truck will be on a custom built manifold paired with a precision 5858 turbo I built a few years back but he wants to work the bugs out before that goes on it!

Let's move these out the box they are in Buy 2 get 1 free t shirts- $25 shippedXl-3 leftL-2 leftM-1 leftSweatshirts- $45...
05/08/2023

Let's move these out the box they are in

Buy 2 get 1 free t shirts- $25 shipped
Xl-3 left
L-2 left
M-1 left
Sweatshirts- $45 shipped
Xl-1 left

Just finished up on this 8.50 cage with swing out door bars! Added a parachute mount to the cage as well
04/22/2023

Just finished up on this 8.50 cage with swing out door bars! Added a parachute mount to the cage as well

Address

Ellsworth, WI
54011

Telephone

+17159281680

Website

Alerts

Be the first to know and let us send you an email when Sullivans garage & fabrication posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share

Category