Wilson Performance Fabrication

Wilson Performance Fabrication Fabrication Shop

Good morning everybody! First off I’d like to thank everyone that has been by for the t-shirts and hoodies. And if you h...
03/08/2026

Good morning everybody! First off I’d like to thank everyone that has been by for the t-shirts and hoodies. And if you haven’t and would like to get something give us a shout and swing by while supplies last. Also, I’d like to thank the customers that have been in recently for some upgrades, here are just a few of the pictures of some of the projects we can show. You know, some of you guys like to keep things private.😜😜😜

So since we put out the new design of the tees and hoodies we’ve gotten a lot of compliments. So I want to take a minute...
02/05/2026

So since we put out the new design of the tees and hoodies we’ve gotten a lot of compliments. So I want to take a minute and thank JT Spence for puting it all together. If anyone is thinking of getting a design done, weather for tees, stickers or a logo, give him a shout. You won’t be disappointed!

01/17/2026

Ok everybody the shirts and hoodies are in. The shirts are $20, the hoodies are $35 and if you buy one of each it’s $50 for both.

Coming soon, hot off the press! A new shipment of t-shirts and hoodies.
01/15/2026

Coming soon, hot off the press! A new shipment of t-shirts and hoodies.

11/27/2025

Happy Thanksgiving from all of us, to all of you!!!

This is something that we’ve been working on in our spare time if you can believe that. Right now we have only built the...
08/30/2025

This is something that we’ve been working on in our spare time if you can believe that. Right now we have only built these nerf bars for the Polaris Ranger and the Crew models, but we have been talking with some customers about some for the Honda Talon and the Kawasaki KRX models. These can have custom plates added like the green ones I did in the picture. While I was at it, I built a roll bar for the Ranger bed pockets to attach different items and to hold a spare tire. These can be ordered bare, standard shop black paint or powder coated (powder is an extra charge). I’d like to thank Chris at First Flite Powder Coating for the coatings on the ones shown. If you have something custom you’d like done, just give us a shout and we’ll make it happen.

I want to shout out a big thank you to Rich Walker for allowing us to do a complete suspension makeover on his 69’ Dart...
08/29/2025

I want to shout out a big thank you to Rich Walker for allowing us to do a complete suspension makeover on his 69’ Dart. Here is the list of mods we added along with a few pictures: mini tubes, frame relocation kit, frame connectors, new leaf springs, Cal-tracs and there adjustable shocks, TRZ anti-roll bar, 10 point custom roll rage built in house, new truck floor pan and fuel cell. We can’t wait to see you at the track.

These are a couple smaller jobs that we were able to knock out during the down time of waiting on parts.
08/27/2025

These are a couple smaller jobs that we were able to knock out during the down time of waiting on parts.

Time to take a minute to thank Titus Legget for letting us build him a new set of custom headers. Cerikoted black with S...
08/27/2025

Time to take a minute to thank Titus Legget for letting us build him a new set of custom headers. Cerikoted black with Stainless merge collectors.

So we get busy looking after our customers on a regular basis and I get behind on my post. This is something completely ...
06/13/2025

So we get busy looking after our customers on a regular basis and I get behind on my post. This is something completely different than what we normally do, but if a customer ask for something, we try to make it happen. Ryan, cane to me and want specifically a steel bed and had a good idea the design. We talked, refined exactly what they want, I draw the design and we built a custom King bed. Although this project has been in the works about 3-4 months, my schedule and First Flite Powder Coating didn’t mesh. But together we finally got it done and delivered. Thanks to the Anderson’s for let us build this behemoth and First Flite Powder Coating forr the flawless coating. 

Address

1420 US Highway 17 South
Elizabeth City, NC
27909

Opening Hours

Monday 6pm - 9pm
Tuesday 6pm - 9pm
Wednesday 6pm - 9pm
Thursday 6pm - 9pm
Saturday 10am - 5pm
Sunday 1pm - 5pm

Telephone

+12523394255

Website

Alerts

Be the first to know and let us send you an email when Wilson Performance Fabrication posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share

Category