AccuTune Off-Road

AccuTune Off-Road AccuTune Off-Road specializes tuning shocks before they are installed by using engineering equations Pre-Tuned Fox and King shocks using engineering equations.
(1)

05-23 Tacoma U-Bolt Flip Kit with Bump Stop Better bottom-out control – The integrated bump stop helps control suspensio...
08/25/2026

05-23 Tacoma U-Bolt Flip Kit with Bump Stop

Better bottom-out control – The integrated bump stop helps control suspension compression and reduces harsh bottom-outs when the rear suspension is heavily loaded or driven aggressively off-road.

8 different bump stop height options – Adjustable bump stop height lets you fine tune when the bump stop engages based on your suspension setup and available travel. 8 different bump stop height options – Adjustable bump stop height lets you fine tune when the bump stop engages based on your suspension setup and available travel.

Gain valuable ground clearance – Flips the factory U-bolts so they sit above the leaf spring, reducing the amount of hardware hanging below the axle.

Bump Stop Spacer chart for Ride Shocks. Maximize shock travel

Bump Stop Spacer chart for King Shocks. Maximize shock travel

Bump Stop Spacer chart for Fox Shocks. Maximize shock travel

2022+ Toyota Tundra Ride Shocks. Coming soon. 🔥Stay tuned for the full reveal.
08/24/2026

2022+ Toyota Tundra Ride Shocks. Coming soon. 🔥
Stay tuned for the full reveal.

4600 Racers!🤔 Which is better, portals with 35” tires or no portals with 37” tires?
08/21/2026

4600 Racers!

🤔 Which is better, portals with 35” tires or no portals with 37” tires?

🤔 Is long travel the dream or is a dialed in mid travel good enough?
08/19/2026

🤔 Is long travel the dream or is a dialed in mid travel good enough?

Preload is often misunderstood. It does not refer to how many threads are showing on your coilover. Instead, preload is ...
08/18/2026

Preload is often misunderstood. It does not refer to how many threads are showing on your coilover. Instead, preload is the amount of tension applied to the coil spring before the weight of the vehicle is added—essentially, how much the spring is compressed in its unloaded state.

Preload is measured in inches, not threads.

Example:
If you have a 14” long spring, and it measures 12” tall when installed on a fully extended shock, then you have 2 inches of preload.

08/17/2026

Ride Shocks are built for the miles that happen after the pavement ends. Built to ride. Built to take a beating. Built for the trail.

08/13/2026

Full send down Barstow Main with Allegri Racing

King of the Hammers is not too far away, are you ready?

08/11/2026

Sometimes the small details make a big difference.

In this video, we’re swapping the standard fitting for a 90° fitting on a 2.5” King coilover to improve hose routing, create a cleaner installation, and make the adjuster k**b easier to access.

08/06/2026

Part 3, torquing the jam nuts on these Team FK

08/04/2026

Part 2, installing Team FK into a Tacoma upper control arm.

Address

9448 Bond Ave
El Cajon, CA
92021

Opening Hours

Monday 7am - 4pm
Tuesday 7am - 4pm
Wednesday 7am - 4pm
Thursday 7am - 4pm
Friday 7am - 4pm

Telephone

+14243770808

Website

Alerts

Be the first to know and let us send you an email when AccuTune Off-Road posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share

Category