Otto At Werke

Otto At Werke Contact information, map and directions, contact form, opening hours, services, ratings, photos, videos and announcements from Otto At Werke, Automotive repair centre, 1911 Province Lake Road, East Wakefield, NH.

Otto@Werke is a multifaceted, US based, company offering video and digital media production services as well as knowledgeable BMW and MINI maintenance, repair and modification services.

05/26/2025

2008 BMW 328xi
Customer notes a noise while driving and an intermittent clunking.

Might need a wheel bearing.

Otto At Werke
Www.OttoAtWerke.com
[email protected]
6039695941

2011 Mini Cooper160### milesMisfire, cylinder  #2Multiple misfiresSigh...While it's great to find the issue, some "finds...
10/30/2024

2011 Mini Cooper
160### miles

Misfire, cylinder #2
Multiple misfires

Sigh...
While it's great to find the issue, some "finds" are less than desired.

Burned exhaust valve.

Otto At Werke
Www.OttoAtWerke.com
[email protected]
6039695941

E92 M3Cluster warning lights for Brake, ABS, DSC/DTC, DBC, SRS and I-Drive warnings for DBC and Passenger SRS. Basically...
06/03/2024

E92 M3
Cluster warning lights for Brake, ABS, DSC/DTC, DBC, SRS and I-Drive warnings for DBC and Passenger SRS. Basically all the pretty disco lights.

Fault codes stored for left front & rear wheel speed sensors and steering angle sensor (SAS).

Try an SAS reset and comes back as unable to complete ....... and now the turn signals don't cancel.

The Fix:
1) Replace the right front & rear wheel speed sensors.
2) Remove the steering column switch unit to access the steering angle sensor. Disassemble to access the SAS. Clean the SAS data disc, LED, fiber optic lens. Clean circuit board using DeOxit.

No more dash board disco lights.

Otto At Werke
Www.OttoAtWerke.com
[email protected]
603-969-5941

The difference between proper oil change intervals (5000 miles, for a good synthetic and not a lot of idling or short tr...
05/02/2024

The difference between proper oil change intervals (5000 miles, for a good synthetic and not a lot of idling or short trips ... more often if these are the case) and BMW factory recommended intervals.

Both have similar mileage and age.

Otto At Werke
Www.OttoAtWerke.com
[email protected]
603-969-5941

2009 Mini SCustomer had already diagnosed no compression in  #3. Mmm.... I guess we won't need the leak-down tester.Burn...
04/26/2024

2009 Mini S
Customer had already diagnosed no compression in #3.

Mmm.... I guess we won't need the leak-down tester.

Burned/broken exhaust valve

This Mini will receive a head rebuild and new timing chain & guides.

Otto At Werke
Www.OttoAtWerke.com
[email protected]
603-969-5941

Ran into an issue while attempting to time the BMW 2002.1) Manually adjust distributor for an acceptable running idle.2)...
03/23/2024

Ran into an issue while attempting to time the BMW 2002.

1) Manually adjust distributor for an acceptable running idle.

2) Mark timing marks on crank pulley with white paint.

3) Connect timing light and have a look-see.

4) Hmm... timing marks are many degrees re****ed (like 50 to 60 degrees). No way it could be running this well. Try moving distributor toward getting the marks to the pointer ...... umm, NO.

5) OK, what's going on? Double check everything; marks, distributor install, points, etc. All is fine. Great ... well, something is out of whack.

6) Remove valve cover. Cam is in no way at #1 TDC firing position with marks on pulley at TDC.

7) Remove spark plug and use bore camera to check piston position. OK, it's halfway down in bore with marks at TDC. Rotate crank until piston is TDC and cam is in firing position. Verify that cam is properly timed.

8) Make new marks on pulley.

9) Put it all back together and start again .....

Otto At Werke
Www.OttoAtWerke.com
[email protected]
603-969-5941

Address

1911 Province Lake Road
East Wakefield, NH
03830

Alerts

Be the first to know and let us send you an email when Otto At Werke posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Otto At Werke:

Share