Precision Designs

Precision Designs Precision Designs was founded by Tom Stark in 2009.
(1)

Upgrade your classic's engine bay with our 60-66 GM Truck Hood Hinges! Engineered for a precision fit and smooth operati...
09/03/2026

Upgrade your classic's engine bay with our 60-66 GM Truck Hood Hinges! Engineered for a precision fit and smooth operation, these billet hinges are the perfect finishing touch for any custom build. Shop now at

09/03/2026

The boys have been pushing hard on the ’66 C10 since getting it back from paint, and we’re making some serious progress! A lot of the wiring has been routed, the ECU and Vintage Air evaporator are installed, and the brake system is coming together. We’re now starting on the air ride system and getting everything ready to drop the engine in! We’re making major headway on this project!

Getting the Holley EFI harness installed and routed in the truck! We also added some Dynamat to the firewall to help kee...
09/01/2026

Getting the Holley EFI harness installed and routed in the truck! We also added some Dynamat to the firewall to help keep things nice and quiet inside the cab.
Once that was finished, we installed the firewall plate and started assembling some of the dash components. We’re making some major headway!

Why do we use 3D printing in the shop? It all comes down to precision and perfect fitment. Being able to design a custom...
08/31/2026

Why do we use 3D printing in the shop?

It all comes down to precision and perfect fitment. Being able to design a custom piece in CAD and 3D print a prototype allows us to check clearances, test how it mounts, and dial in the exact look before we ever cut into expensive materials. It takes the guesswork out of complex fabrication and ensures the final product is flawless.

08/28/2026

The body of the C10 is officially sitting back on the frame! We’re excited to finally get this thing back together and start bringing it to life. We’re getting it rolled inside and then it’s time to get to work on getting everything assembled. And man, the paint looks killer.

We got the chassis for the 66 C10 outside and loaded up to go pick up the body and man, this thing looks good! We’re get...
08/27/2026

We got the chassis for the 66 C10 outside and loaded up to go pick up the body and man, this thing looks good! We’re getting really excited to see the body back on the chassis and start bringing this truck together. Next, we’ll be getting to work on getting the engine and transmission in.

Happy National Dog Day to the best shop dog around, Gmoney aka, Maci Faye! 🐾 She keeps morale high, the shop floor secur...
08/26/2026

Happy National Dog Day to the best shop dog around, Gmoney aka, Maci Faye! 🐾 She keeps morale high, the shop floor secure, and always makes sure projects are up to par!

Get a closer look at the C10 cab! The boys at True Colors Customs are ready for us to come pick up this monster! The Gre...
08/25/2026

Get a closer look at the C10 cab! The boys at True Colors Customs are ready for us to come pick up this monster! The Grey and white combo are super simple but look great together!

Our new Billet Aluminum License Plate Frames are designed with a smooth, subtle finish to clean up and finish off the fr...
08/24/2026

Our new Billet Aluminum License Plate Frames are designed with a smooth, subtle finish to clean up and finish off the front or rear of your vehicle. Whether it’s a daily driver or a show car, these are an easy way to add a little extra detail to your project without going over the top. Available in Raw Aluminum or Black Anodized finishes.
Head over to the website and check them out!

The guys killed it on this one! We needed a solution to mount the carrier bearing on the ’66 C10, so Justin got to work ...
08/21/2026

The guys killed it on this one! We needed a solution to mount the carrier bearing on the ’66 C10, so Justin got to work designing some brackets to hold a piece we already had. Instead of just building brackets around it, we decided to completely redesign the part and make it our own. The new design has a built in 2.5° angle to match the driveline angle. Once we had a design everyone was happy with, we chucked it in the machine and went to work on this one-off piece. This thing turned out awesome, and we’re excited to get it installed in the truck!

Address

13903 East Smith Drive
East Aurora, CO
80011

Website

Alerts

Be the first to know and let us send you an email when Precision Designs posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Precision Designs:

Shortcuts

Share

Category