Twisted Axles

Twisted Axles •Suspension/Lift Kit Installation
•Welding/Fabrication
•CNC Plasma Cutting
•Lighting (rock lights)
•Audio
•Any Aftermarket Need (can be limited)

08/23/2026

Share your opinion on which smoker you would prefer!! 🍖🥩

08/19/2026

Thank you for 500 followers!! Be on the lookout for the giveaway coming soon hopefully!

08/02/2026

Check out the new YouTube video where we make the new frame brackets for the show truck

08/01/2026

Starting the metal work on the show truck!!

As you see guys and gals. I just don’t work on trucks. Here’s a Nissan versa that I had to replace struts, wheel bearing...
07/19/2026

As you see guys and gals. I just don’t work on trucks. Here’s a Nissan versa that I had to replace struts, wheel bearings, and a lower control arm. Thank you Charlie and his son for trusting me!!

07/18/2026

Come along as we make a custom bracket for this factory crossmember

Little different than usual job, but nevertheless it’s suspension. Truck has a 6 inch lift, but customer wanted to go ba...
07/12/2026

Little different than usual job, but nevertheless it’s suspension. Truck has a 6 inch lift, but customer wanted to go back down to a level. We had to make a bracket and weld it in, in order for the factory crossmember to go in. On most 6 inch kits or bigger you have to cut and make modifications, and they say you can’t go back down afterwards. You can go back down, but you gotta know what you’re doing and have the skill set to re-fabricate what was cut off. This right here shows what we here at Twisted Axles are capable of doing, because most shops would probably turn this job down. Big thank you to Cayden Runions for trusting me and giving me the opportunity once again, on his vehicle, do the best work.

The new YouTube video is out now!! Yall go check it out! Twisted Axles on YouTube!!
07/04/2026

The new YouTube video is out now!! Yall go check it out! Twisted Axles on YouTube!!

Much needed addition to the shop, feels clean and fresh without all that humidity. Maybe we can get some work done and b...
07/04/2026

Much needed addition to the shop, feels clean and fresh without all that humidity. Maybe we can get some work done and be more efficient 😂

06/28/2026

Here’s a straight piped Hemi still with cats. Dual tips. Don’t mind the header tick or leak at start up

Address

Dyersburg, TN
38024

Website

Alerts

Be the first to know and let us send you an email when Twisted Axles posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Twisted Axles:

Shortcuts

Share

Category