HT Motorworks

HT Motorworks Facebook home for HT MotorWorks Couture vehicle creations

What a race!
04/18/2026

What a race!

67 likes, 2 comments. "The greatest finish in Goodwood's history? | 2026 Win Percy Trophy Full Race | 83MM"

04/13/2026
E36 BMW M3 LS update. I had a little time to start on the underside flat bottom aero. This is one side of the aluminum f...
04/13/2026

E36 BMW M3 LS update.

I had a little time to start on the underside flat bottom aero.

This is one side of the aluminum frame that will bolt to the underside of the car. It's 1"x1" x1/8 6061 tube.

I'll make both sides and lift em in with floor stands and get it all level with the laser. Then drill the frame and the shell for mountings. Mounts in the car will be M8 weld nuts and the frame will get crush tubes welded in for countersink hardware, so the belly pan can bolt to these frames with countersink hardware into nutserts in the frame.

Weld it up then make another.

I am a wood or coal fired pizza guy, Sicilian style. Therefore I am not ashamed to say tonight I had Buddy's for the fir...
04/11/2026

I am a wood or coal fired pizza guy, Sicilian style.

Therefore I am not ashamed to say tonight I had Buddy's for the first time. After over ten years of living in Detroit.

Even without cheese I can tell you this Detroit pizza is way better than it has any right to be!

Stacy and Brock got cheesy.

E36 BMW M3 LS electric power steering is done. Other than mounting the control module under the dash it's all good 🙂Time...
04/05/2026

E36 BMW M3 LS electric power steering is done. Other than mounting the control module under the dash it's all good 🙂

Time to move onto the underside and make mounts for the flat bottom aero, exhaust system etc.

I did a thing and I was sober!After a few years of research, YouTube and hovering I pulled a trigger. 8HP90 8 speed from...
09/22/2025

I did a thing and I was sober!

After a few years of research, YouTube and hovering I pulled a trigger.

8HP90 8 speed from an S8 for Judas. Sequential 8 speed with a clutch, or grandma full auto by pressing a button. Factory rated fo 1000lbtq.

I will miss the manual 6, not so much the clutch although it was amazing for a twin disk.

NOt many people have done this on the planet. I know of two or three done in Europe.

Time will tell. (the built to the hilt 01E was $10k plus FW, Clutch etc.) $20K probaly.

Wish me luck.

Ps the E36 M3 LS car is getting one too, RWD and ITBs

Finally uploaded episode 3 of the BMW E36 M3 LS GTR. My day job has been super hectic so this took a lot longer to come ...
07/11/2025

Finally uploaded episode 3 of the BMW E36 M3 LS GTR. My day job has been super hectic so this took a lot longer to come together than I had hoped.

This episode is all about building firewalls, which is a lot more complex than you might imagine.

The video is pretty long as I wanted to show the entire process.

LMK in the comments what you think, or any questions or thoughts you may have.

https://youtu.be/GgFQnOPHPvc?si=yLtEjpvDd6FbfswJ

I have a photo album for this project and there is a link to it in the video notes. I'll keep this up to date as I proceed with the project.

Link to photo's: https://www.icloud.com/photos/ #/icloudlinks/001Ru18TwKYSGSbyhSg58rw3g/

View, organize, and share photos and videos with iCloud Photos on the web. Changes will sync across your devices with iCloud.

Address

Detroit, MI
48238

Alerts

Be the first to know and let us send you an email when HT Motorworks posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to HT Motorworks:

Share