Custom Fabrication and Welding

Custom Fabrication and Welding Contact information, map and directions, contact form, opening hours, services, ratings, photos, videos and announcements from Custom Fabrication and Welding, 2009 Gordon Terry parkway, Decatur, AL.

First of all I want to thank my parents for their service and showing me the work ethic that I put in everyday. And to a...
11/11/2025

First of all I want to thank my parents for their service and showing me the work ethic that I put in everyday. And to all the veterans who have worked for me over the years, THANK YOU FOR YOUR SERVICE.

Here is a new fitting we built Thursday in the shop. 26" dia on the big end to 3 13" dia outlets.
06/22/2025

Here is a new fitting we built Thursday in the shop. 26" dia on the big end to 3 13" dia outlets.

We are now able to roll .125 plate 60" wide. Next will be a press brake.
03/13/2025

We are now able to roll .125 plate 60" wide. Next will be a press brake.

Had to build a custom 64" dia 90 deg elbow with turning veins. First time to do it. And had to fit in some small spaces ...
12/16/2024

Had to build a custom 64" dia 90 deg elbow with turning veins. First time to do it. And had to fit in some small spaces to weld.

05/01/2024

Well come to find out that my Att phone has be going in and out for about the last month. If I have missed your call I'm sorry. I didn't know there was a problem. Hope to have fixed tomorrow.

First of all, to my parents, thank you for your service and the respect you taught me for the flag, our country and the ...
11/10/2023

First of all, to my parents, thank you for your service and the respect you taught me for the flag, our country and the men and women in uniform. Second, to all the young men who served and work for me over the years. Thank you! To all the other veterans, thank you for your service and sacrifice. May you all have a blessed Veterans day.

So I don't know if it was a mistake or someone looking out for me but someone mowed my new shop. We have been busy in an...
05/26/2023

So I don't know if it was a mistake or someone looking out for me but someone mowed my new shop. We have been busy in and out of the shop and I haven't been able to take care of it. To whoever it was I want to say THANK YOU! To have someone take time out of their busy lives and do this for me mean a lot. I am blessed with good friends and customers. Someone also took the last of the tires someone dropped off when we were cleaning it out. Thanks to you too.

Yesterday was a big day for Custom Fabrication and Welding. We bought the shop across the street from where we are now. ...
12/30/2022

Yesterday was a big day for Custom Fabrication and Welding. We bought the shop across the street from where we are now. The shop we are in now is 2400 sq ft now we will have over 7000 sq ft. This building is a huge upgrade for us.
We started our 18th year in business this December. I'm so blessed with a wonderful wife, family, friends and customers.
There is some renovation that we will be doing so it will take a few months before we are able to move in. Hopefully will be adding some new equipment to add to our arsenal of metal fabrication capabilities.
Thanks to all that have encouraged me through this process. I would like to thank Ashton DeMent from The River Bank and Trust and Jeff Parker from Parker Real Estate for all the hard work and putting up with me.

Merry Christmas from the metal shop!
12/25/2022

Merry Christmas from the metal shop!

Here is a set of handrails we have been working on in the shop. Finally able to install. Thanks to Apex Powder Coating A...
11/23/2022

Here is a set of handrails we have been working on in the shop. Finally able to install. Thanks to Apex Powder Coating Alabama for the great looking powder coating job as always. These handrails have a lot of time in design and fabrication. These handrails also match a table we did for the customer.

Customer wanted a pair of cupolas for their barn. Total of 39 pieces to complete. Made in 3 separate pieces to make it e...
08/01/2022

Customer wanted a pair of cupolas for their barn. Total of 39 pieces to complete. Made in 3 separate pieces to make it easier to install.

Address

2009 Gordon Terry Parkway
Decatur, AL
35601

Opening Hours

Monday 7am - 4pm
Tuesday 7am - 4pm
Wednesday 7am - 4pm
Thursday 7am - 4pm
Friday 7am - 4pm

Website

Alerts

Be the first to know and let us send you an email when Custom Fabrication and Welding posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share