1971 BMW 3.0 CSI project, Dallas TX

1971 BMW 3.0 CSI project, Dallas TX This page is about the restoration of a rusty 1971 BMW 3.0 CSI purchased on EBAY on 2007

Mounting the air conditioner. As is typical of most euro 3.0 CSi’s, my car did not come with air conditioning. This uni...
11/11/2017

Mounting the air conditioner. As is typical of most euro 3.0 CSi’s, my car did not come with air conditioning. This unit was removed from my US parts car.

The curved, felt strips for the rear quarter windows was not available so I fabricated a set using a set from a porsche ...
10/25/2017

The curved, felt strips for the rear quarter windows was not available so I fabricated a set using a set from a porsche 356

These yellow 5 amp, german, ceramic fuses were not available at the parts stores. Once again, Ebay came to the rescue.
10/14/2017

These yellow 5 amp, german, ceramic fuses were not available at the parts stores. Once again, Ebay came to the rescue.

This is the left side glove box. It was missing when i got the car and unfortunately was missing from the parts car too....
10/14/2017

This is the left side glove box. It was missing when i got the car and unfortunately was missing from the parts car too.
Apparently the bottom hinge collects moisture, rusts and freezes up. Attempts to force it open damages the door.

I was fortunate to find a replacement (pictured) on ebay)

Installed the hood release lever, wire ,and hood catches. Once installed, the assembly had to be adjusted.
10/09/2017

Installed the hood release lever, wire ,and hood catches. Once installed, the assembly had to be adjusted.

Address

10944 Grissom Lane
Dallas, TX
75229

Website

Alerts

Be the first to know and let us send you an email when 1971 BMW 3.0 CSI project, Dallas TX posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to 1971 BMW 3.0 CSI project, Dallas TX:

Shortcuts

Share