E&J Autoworks, INC

04/01/2024

This goes out to a clown that likes to talk a lot of BS and hide behind the keypad.
You reported me to Facebook, you tell customers i am a troublemaker and so on, but it didn't work. Listen, you and your work are beneath me. Let me give you a friendly advice, stop wasting your energy in the lying and your dream selling and do a start over.
Go back to the drawing board and design your stuff properly and create proper fixtures and may be your customer won't have to send your stuff to get fixed. You can fool some but not everyone.
Your claim to make parts that break world records, but you know that the credit goes to the one that fixes your crap. Anyways, your time has ran out and everyone is on to you, so start doing your job or invest in a new book of excuses.
Now, here is a warning. Next time I hear one bs comments that came from you, true or not, you will be sorry.

So you know what i am capable of doing,

1. I will reverse engineer your crap parts vs oem
2. I will verify flatness
3. i will spec out your monstrosity.
and i will do it live for everyone to see.
4. i will jump into the market with a better product.

your called me a trouble maker? Well, here i am.

good luck to you
Edgar Perez

10/03/2022

After 3 long years, our Rx8 is back.

We took time off to fix and improve in many areas that we found were need it.

One bearing issues
Two housing issues
New injection set up
New quickdrive set up
And a few other things.

Today was our first start up and every thing sound and looks great.
In the next few days we will have a few heat cycles and verify compression.

Dyno and testing very soon.

A huge thank you to every one that put there I put and and assistance.

Thank you

07/04/2022

We want to wish every one a safe and happy 4th of July.

06/30/2022

YES, WE DID IT AGAIN. ANOTHER 1ST.

Is time to introduce a our newest member of the E&J apex seal family.

Our goal here at E&J is to make sure our customers have best parts available.

In today's racing worlds, we are pushing everything to the limits. How?
Some of us are pushing 90 psi plus of boost, hotter egt temperature, higher RPMs.

So, if you are pushing the seals out of the exhaust in one piece, loosing compression do to large exhaust marks, melting apex seals?

Well look no more, we have solved your problems.

The solution is, E&J new pro apex seal.

For the last year, we been testing with some of the world's fastest cars with amazing results, in facts winning results.

1. Better compressing
2. Holding higher temperatures
3. No apex seal flex

Some may claim to be the best, but the best never claim, we do it.

Cost $500.00 per ser plus freight.

E&J #1 CHOICE OF THE RACERS

03/12/2022

Now in stock..

E&J rons drive crank pulley.

What make this a great choice for you.

1. Lighter
2. One less thing to break.
3. One less thing to assemble.

Available in black and machine finish.

Limited inventory.

Dont miss out.

$295.00 plus freight.

03/12/2022

03/09/2022

We are happy to announce our new pro flow E&J throttle body.

We been testing for a few month with amazing results.

More torque, more power.

It will be available with our original bore 1.875 and our big bore 1.95.
At the moment is available in 4 inj, 8 inj, 12 inj
Our new throttle body will fit the billet atomizer with no modifications.

They are in production as we speak.

Get them while they are hot.

$1100.00 retail

03/08/2022

The wait is over, the prototype is finally here.

Our new crank pulley with rons fuel pump drive gear. Yes that's is correct.

Machined in house out T6-6061 aluminum

At this time we are taking orders and we should have them ready in about 2 weeks and anodized black in 30 days.

Retail $295.00 plus freight

01/31/2022

After years of testing and great success.
Is finally time offer the service.

E&J rear bearing support kit.

Cost
$400.00
Customer has to send counter and stationary

If new parts
$400.00 plus rear start and counter.

The set will be bolt on and no additional modifications will be need it.

Say good bye to the bearing issues.
Say good bye to the eshaft flex.

01/19/2022

2022 is starting with a new look and improved E&J apex seals.
Our goal at E&J, is to always to make improvements to help our customers fullfill their goals.
At the end of 2021, we were able to test our seals and found much improved success.
We saw our customers improve and run personal best and even new records.

Some of our improvements that we were able to accomplish,
1. Higher compression than the previous
2. Less friction causing longer life
3. Better sealing power

Dont stay behind, make 2022 your best year. Get you E&J seals today.

03/14/2021

Killing a job for one of our customers.

+-.0005

Ufffff

03/12/2021

Thank you to Jorge L Rojas and Entertainment Motorsports D Show for coming our shop.
We had a great time and I truly hope every one enjoyed it.

Thank you

The interview was done in Spanish

01/28/2021

Because we feel covid is not going any where any time soon.
We been searching for the best mask available for my family and we belive we found them.
They are not cheap but my family health has no price.

The SonoMask is a reusable face mask that protects you and the environment. With a clinically validated filtration of 5 microns, it effectively provides a barrier from infected micro-droplets, the principal method of virus transmission according to the World Health Organization.

The SonoMask is produced from Sonovia’s patented fabric with antiviral properties. Sonovia treats fabrics with zinc oxide nanoparticles through ultrasonic sono-finishing technology developed by the company in 2013. The mask’s fabric has undergone external laboratory tests and has garnered great results for effectiveness at protection even after 55+ washes. The dual-layers, containing cotton and polyester, act as shields against external contamination while providing breathable cover. The SonoMask has adjustable straps/loops and an internal nose-wire allowing each individual to get the most comfortable and secure fit, and providing unparalleled protection throughout the day.

Please visit our website for a more information,

https://www.enjautoworks.com/product/ej-custom-face-mask-reusable-adjustable-with-nose-wire/

We will have them available in white and black and three different sizes.
Men
Woman
Children

The cost
$45.00 each
$99.00 for a pack of 3
$149.00 for a pack of 5

Limited amount

Please stay safe and stay healthy.

01/27/2021

E&J bearing support. Bolt on, no fuzz no hassles.
Instock

Our bearing support are machined from 4140 steel in house.
With a dead center bore and a .001 of stat to support clearance assure you that your eshaft will not flex or harm your bearings.
Street, road or drag, no problem.
We now have over 100 customers running them with no issues.
As soon as racing start we will have some of the fastest running our new support.
Don't be left out..

$250.00 plus freight

Available for
Fd
Fc
12a

01/27/2021

E&J's 20b low profile eshaft nut.

The 20b nut is machines out of 4140 steel in house and the thread is machined from a custom tapped to precision.

In stock
$50.00 Plus freight.

01/27/2021

Back in stock E&J's Billet rotor and stationary bearing installers.

Our installer won't let you down. A perfect press every time.
The E&J bearing installer has a guide that follows the stat or rotor bore before the bearing to insure that is always lined up. If you want to press your own bearing perfect every time, give us a call.

Available
Rotors , yellow and green bearing
Stationary, yellow and green bearing
New 20b stationary installer

Rotor. $150
Stationary. $125
20b stationary $125.00

Plus freight

Instock