Top Notch Garage

Top Notch Garage Repair, Performance, Maintenance, Fabrication, QUALITY. We do it all. Foxbody Mustang specialists.

08/22/2026

Are you needing more fan than the popular contour set up? We now have a solution for this common issue. Custom fan shroud designed to bolt up to fox radiators, paired with a set of brushless PROFORM Parts 4200 cfm fans. These fans can be PWM controlled or run full speed constant.

The team at Top Notch Garage is not playing. There are many updates coming on the YouTube channel this week but the Grif...
08/21/2026

The team at Top Notch Garage is not playing. There are many updates coming on the YouTube channel this week but the Griffin Radiator is mocked up to get some custom mounts on the side and not over the top of the radiator. Intercooler is mounted and the bumper has been cut to fit perfectly. The team over there is truly top notch.

The KSDNOTCH is officially WIRED UP! 🔥⚡️The team at Top Notch Garage GA just finished wiring the Holley Dominator EFI, a...
08/17/2026

The KSDNOTCH is officially WIRED UP! 🔥⚡️

The team at Top Notch Garage GA just finished wiring the Holley Dominator EFI, and when I tell you this install is CLEAN… 🔥

In the latest episode of Built vs Bought, we get into just how complex the Dominator wiring can be on a build like this and take a closer look at the amount of work that went into making everything function correctly while keeping the engine bay looking right.

With the 5.2L Aluminator + ESS G3R + Holley Dominator combination coming together, we’re getting closer and closer to hearing the KSDNOTCH FIRE UP for the first time. 👀

🎥 FULL VIDEO NOW LIVE ON YOUTUBE — BUILT VS BOUGHT!

Huge thanks to all the partners helping bring this build together:


ESS Tuning
American Racing Solutions
EPAS Performance
Braum Racing
Baer Brakes
RON FRANCIS WIRING Wiring
Ridetech
Derale Performance
Griffin Radiator
Continental Tire
Victory Custom Wheels
Top Notch Garage

1,000+ HP is the goal. We’re getting CLOSE. 🏁🔥

08/11/2026

Isac’s Fox came in with a tired stock bottom end 302. Upgraded to an BluePrint Engines 347ci long block, paired with a Holley Systemax intake and 70mm throttle body. Tuned on Holley Performance Terminator X.

08/10/2026

Steve Young Fox with a boosted 363 from Jim Woods putting down some power! Flex fuel tuned with Holley Performance terminator x. Upgraded fuel system using an 03 cobra style tank with a division X dual pump hat from LethalPerformance.com and dual 450lph fuel pumps. High quality PTFE plumbing and fittings from FLF Racing Supply as on all of our builds. We also installed a UPR Products chromoly K-member and coil-over kit. This is one nasty GT!!!

07/28/2026

Steve Young the Jim Woods 363 is installed and running. A couple more little punch list items and it’s ready for the dyno.

07/21/2026

Steve Young heart transplant has started. Fresh 363 ready for boost from Jim Woods. Stay tuned for more progress!

07/20/2026

Late to post this! Elliott Fisher pristine 1983 GLX all the way from Ohio. We swapped out the tired and lethargic V6 with a 4 bolt main 302 from BluePrint Engines and mated it to a brand new Ford Performance T5. Custom built exhaust in house by Taylor Norris. Welded in a set of UPR Products full length subframe connectors and got it sitting proper with Eibach, Inc. pro-kit springs and UPR Products caster camber plates and bump-steer kit. Break in and carb tuning done in house on our Mustang Dynamometer.

07/18/2026

Jimmy Fox super clean hatch back ready to head home to Alabama. This fox got a 5-lug swap with 2000 cobra R Brembo 4-piston calipers up front and cobra rear set up. An Edelbrock U S A intake elbow and 90mm LS throttle body, wire clean up and a fuel system. Finished off with a custom tune in house on the Holley Performance Brands Terminator X.

07/17/2026

Carlos’ T-top hatch ready to go home after Holley Performance Brands Terminator X install. Custom tuned in house, and like all of our installs all factory gauges integrated in and functional. Taylor Norris with another clean install.

Address

210 Rope Mill Parkway, Suite 1
Cu***ng, GA
30188

Opening Hours

Monday 8am - 5pm
Tuesday 8am - 5pm
Wednesday 8am - 5pm
Thursday 8am - 5pm
Friday 8am - 5pm

Telephone

+14708392956

Website

Alerts

Be the first to know and let us send you an email when Top Notch Garage posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Top Notch Garage:

Shortcuts

Share

Category