Diversified Sales and Service LLC

09/19/2026

We changed out the flat tire today at our shop in Creston, Iowa.

Good morning Worldwide fans. Today is September 18th and we are going to finish our Iowa route with the F-14. Current distance from our stopping point today is 3 hours 54 minutes on route.

Highway 65 north from MO line to highway 34.
Highway 34 to highway 275 south.
Highway 275 to highway 2.
Highway 2 to the NE city exit at I-29 and highway 2.
If we leave on time at 8AM below are the distances away from towns.

7:55 AM we are leaving lineville IA

Lucas Iowa 30 MIN 8:30AM (on time)
Osceola Iowa 8:46 AM (on time)
Creston Iowa 9:21 AM (DELAY 9:25 AM) ADDED delay. Es**rt with a flat tire)

Rolling again at 10:13AM
Corning was 10:36 AM

Red Oak Iowa 10:08 AM (delayed but enroute) 11:02AM
Malvern Iowa 10:29 AM (delayed but enroute) 11:22
275 turn at 11:28
Tabor Iowa 10:41AM (delayed but enroute) 11:38
Sidney Iowa (bypass) 11:52AM
NE city exit on I-29 217 miles.

We will do our best to update times. Check back on this post for updates.

08/24/2026

Truck #92 in for storm damage repairs

Replaced top hood panels and grill shell, went with a “Little Big Hood Conversion Kit”

Repaired scratches and minor cracks in front fenders and re painted

Installed new passenger side mirror bracket that had been ripped off, also ran new coax cables and am/fm antenna cable and all antennas

Trailer only had to have 1 tarp binder bar replaced and front RH corner stainless

Thank you Todd Goldsmith for trusting us to repair your equipment

07/13/2026

Congratulations David & Karli Buffington on there new W-900!!!! It turned out great!!!!

This truck has had a lot of work done to it…… and guessing a lot more to come in the future….. are they ever really “ done” though? 😎

Anyway here’s a general list of everything completed on this ride.

-12 Ga visor
-12 Ga step covers
-12 GA side panels
-WTI fenders
- Fabricated fender brackets
- Fabricated tail section
- Relocated pusher air tank
- Relocated all pusher axle valving to accommodate more air flow under the truck.
- Merritt deck plate ( VDZ ) air line box and tool box
- APU Condensor bracket
- Fenix 60” strobe light bar
- Curved work light bar
- All TRUX lights

Thank you very much David & Karli for allowing us to be apart of this build.

05/20/2026

Just finished up this beautiful Peterbilt here at Diversified Sales and Service

This truck received-

- Sandblast and Painted Frame
- Painted Airbag Tops and Sleeper Shocks
- Painted Deckplate
- Paint Matched Cab and Sleeper Panels
- Paint Matched Door Handles
- Painted Front Brake Drums
- Full Paint Correction
- Sleeper Roof Cap Repair

Thank you Rob Russell/Work Horse Farms for trusting us to work on your equipment, we greatly appreciate it

12/20/2025

11/14/2025

We have had to eat plenty of work because of past employees. This is sad but we always try and do the right thing.