Pole Cat Polishing

09/03/2026

A little bit more of the California style on the new truck now with polished pipes.....

09/01/2026

08/29/2026

08/20/2026

2002 Dodge 3500 2wd Cummins DRW
250k Miles
Power windows, power locks, cruise control, steering wheel radio controls and power Driver's seat

The list I've done to it in the last 4 years that I've had it (that i can remember):

-Windshield
-Turbo
-Front Main seal
-Front cover seal
-Transmission heat exchanger
-Transmission lines
-Main coolant hoses
-Alternator
-Starter
-Balancer
-Upper and lower Control arms
-Front coil springs
-All Front end joints, tie rod ends, -Pittman and idler arms
-Steer box brace
-A/C compressor
-Headlight buckets and bulbs
-Rear bumper
-Ash tray
-New Dash
-Heater Core
-Drivers seat foam
-Overhead valve adjustment
-Valve cover gasket
-Complete driveshaft with joints and center bearing
-Transmission output seal
-Rear spring shackles
-Rear U bolts
-Brakes and calipers all the way around
-Fleece in tank fuel system (pump, sending unit, lines, filter housing)
-All 6 Tires last summer
-Front fenders
-Side Mirrors
-Vent shades
-Water pump
-Belt
-Idler
-Tensioner
-Tailgate hinges
-Front wheel bearings/hubs
-Rear wheel bearings
-Right side parking brake shoes and springs
-Oil pan
-Transmission fluid and filter
-Rear diff fluid
-Radio
-Headlight switch

All parts I could find new were replaced with new

I used this truck to haul my enclosed trailer for work so I always replaced anything I thought could give me trouble at some point before it ever would so I'd avoid breakdowns. It's one of the cleanest second gens you'll find in Maine and has been gone through to be a super reliable truck.

Only selling because I bought a 6th vehicle and I need to make some room in the driveway. Lol

$16k OBRO

FB Message or text
Ted 207-314-6266

08/18/2026

Took the new tow rig for a shake down ride to see how it would do with the trailer.

Hauls really well with the 4.30 gears but we'll have to see if I can get the mpg a bit better than 8 on flatter roads.

08/12/2026

A once over on the paint and metal.....