AKMspeed at Garage 137

Directions Website

AKMspeed at Garage 137 Hey guys, I'm Arthur I do porting on throttle bodies intakes superchargers and cylinder heads

Ported out street port, fully loaded with some used tested bricks and hemi throttle body kit I am pairing this one toget...
10/08/2026

Ported out street port, fully loaded with some used tested bricks and hemi throttle body kit

I am pairing this one together for a customer with an IE 207mm crank pulley

10/08/2026

https://www.facebook.com/share/18VjjtXEph/

I still have this personal crec blower I'm selling for a deal

Comes loaded with bricks, and has a 57mm pulley already on it

I can throw on a 80/84mm throttle body for extra

All the blowers I have done this week and last week which were orders for vorsprung customers Crec street port, ceramic ...
10/08/2026

All the blowers I have done this week and last week which were orders for vorsprung customers

Crec street port, ceramic coated black

two CTUB race ports, more aggressive needle bearing porting for these, unpainted cases

Stay smooth y'all

Ported focus ST head for sale This is the OG head off my focus ST, I put on a pre ported head on my car and pulled off a...
09/29/2026

Ported focus ST head for sale

This is the OG head off my focus ST, I put on a pre ported head on my car and pulled off and ported this head, cleaned and flow tested it

Head has ported intake runners, not single runner conversion, minimal exhaust porting to prevent cracking and pocket port and valve job

The head was then hot tanked, surfaced and cleaned and fluxed to make sure no micro cracks are on the head

$1500 shipped, can assemble for customer or leave disassembled so they can install beefier springs

Knocking out some VQ orders today so no Audi 3.0 but I did compile together a VDO TB kit today for a customerI like pair...
09/25/2026

Knocking out some VQ orders today so no Audi 3.0 but I did compile together a VDO TB kit today for a customer

I like pairing my ported blowers with ported throttle bodies because it the shaved inlet taper allows for about a 15-20% CFM improvement in airflow, this in turn improves throttle response and how the car preforms in the low to mid range, which is very important for our Audi 3.0's when we dig our cars and need to get out the hole

My kits start at $250 and come with everything needed to install a big VDO throttle body on a car, and depending on options can be optioned out with. A ported hemi TB like how this customer selected or a new ported out 84mm Throttle body, which is $450 for my most expensive kit

Any questions feel free to hit me up

Arthur AKMspeed at Garage 137

09/21/2026

Stefan (customer) just posted a video of him doing a run with the street port blower

187/57 combo on 93, at redline blower hit 22.63psi/034's Max boost for their 93 tune

Blower going out to CanadaCustomer is doing a snout swap since he has a 57mm pulley on his other blower
09/17/2026

Blower going out to Canada

Customer is doing a snout swap since he has a 57mm pulley on his other blower

Ported blower customer in Europe
09/16/2026

Ported blower customer in Europe

Customer picked up this blower yesterday, did a race port for him and threw on a throttle body adapter so that he can ru...
09/08/2026

Customer picked up this blower yesterday, did a race port for him and threw on a throttle body adapter so that he can run his 84mm BMW throttle body

Supercharger was painted prior to me porting it

Hellcat snouts done up and ready to ship out
09/08/2026

Hellcat snouts done up and ready to ship out

Address

1784 Lindbergh Drive
Columbia, MO
65251

Website

Alerts

Be the first to know and let us send you an email when AKMspeed at Garage 137 posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share

Category