The engine shop inc

The engine shop inc Stock rebuilds, high performance machine work, high performance engines...

07/28/2026

Dialing in main clearance on this BMW block using Automotive Racing Products Inc. main studs and VAC Motorsports | BMW Performance Parts coated main and rod bearings.

07/19/2026

Surfacing this ford windsor intake for a customer. It was leaking coolant from low spots. You can see how low the one corner is after the first cleanup cut.

2200 hp capable 427 ls finished this week. Dart Machinery block, Callies Performance Products billet ccw 4” stroke cra...
06/25/2026

2200 hp capable 427 ls finished this week. Dart Machinery block, Callies Performance Products billet ccw 4” stroke crank, BoostLine Products rods with L19 bolt upgrade, Diamond Racing Pistons ceramic coated and gas ported pistons, Total Seal Piston Rings rings, Automotive Racing Products Inc. main studs, 1/2” head studs, Frankenstein Engine Dynamics m311 heads, Cam Motion custom geound low lash solid roller cam, PAC Racing Springs solid roller springs, Jesel Valvetrain Innovation rocker shafts, Innovators West, Inc. balancer, Holley Performance Brands oil pan ICT Billet LLC covers and more! All planned, balanced, blueprinted, machined and assembled in house!

416 C.I. LSA stroker finished up this week. 4340 forged 4” crank, H-beam rods, forged icon pistons, main studs a...
05/05/2026

416 C.I. LSA stroker finished up this week. 4340 forged 4” crank, H-beam rods, forged icon pistons, main studs and head bolts, coated main and rod bearings, cnc ported heads and lost more! all balanced, machined and built in house

Clearencing an aluminum 5.3 ls block for s full counterweighted 4340 forged steel 4” crank.
05/04/2026

Clearencing an aluminum 5.3 ls block for s full counterweighted 4340 forged steel 4” crank.

Real nice 383 short block finished today for some boost. 4340 3.750 stroke crank and H-beam rods with a set of powe...
04/17/2026

Real nice 383 short block finished today for some boost. 4340 3.750 stroke crank and H-beam rods with a set of power pack pistons. main studs and performance maind and rod bearings.

Ls7 finished up this week. ls7 heads, oil pump, tie bar lifters, forged pistons, head studs and rod bolts and lots...
04/08/2026

Ls7 finished up this week. ls7 heads, oil pump, tie bar lifters, forged pistons, head studs and rod bolts and lots more! All balanced, machined, blueprinted and assembled in house

Flame Hoops done this week with our boring machine along with our plates on some ls engines. If you want to run bi...
03/06/2026

Flame Hoops done this week with our boring machine along with our plates on some ls engines. If you want to run big boost but keep blowing gaskets this is your solution. All done in house. 610 734 1800. Call or stop in the shop.

Gen IV aluminum 5.3 ls short blocks In stock. Blocks are bored and honed .010, zero decked and cleaned. Gen IV 58x cran...
02/12/2026

Gen IV aluminum 5.3 ls short blocks In stock. Blocks are bored and honed .010, zero decked and cleaned. Gen IV 58x crank polished standard on main and rods and balanced to gen IV floated rods with ARP 2000 bolts, Icon forged flat top pistons with King Racing main and rod bearings. Bearing clearences set and rings gaped assembled in the block with new durabond cam bearings and a felpro rear main seal. 3800 out the door. 3300 with a core. ARP main studs add 400 H-beam rods add 400. Engines can be completed with heads and cams for aditional charges. All work in house by The Engine Shop in collingdale pa. Give us a call or stop in 610 734 1800

Fresh 799 ls heads done and ready to roll out. Complete 3 angle valve job, decked .005 checked for cracks, cleaned and a...
01/30/2026

Fresh 799 ls heads done and ready to roll out. Complete 3 angle valve job, decked .005 checked for cracks, cleaned and assembled with new .660 springs, retainers, locks, cups and seals.

Address

330 Pusey Avenue, Suite #6
Collingdale, PA
19023

Opening Hours

Monday 7:30am - 5pm
Tuesday 7:30am - 5:30pm
Wednesday 7:30am - 4am
Thursday 7:30am - 5:30pm
Friday 7:30am - 4:30pm
Saturday 7:30am - 11am

Telephone

+16107341800

Website

Alerts

Be the first to know and let us send you an email when The engine shop inc posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to The engine shop inc:

Shortcuts

Share

Category