VEMS USA

05/15/2023

Anybody in the market for a 2nd Gen DSM standalone? We designed this adapter board for a local project, so will make it available. Getting ready to order the first run of PCBs. Comment below or message us for details or interest.

04/27/2023

The grass is finally turning green and the trees are budding in Vermont. To celebrate that and the rare occurrence we have m52/s52 ecus in stock, we're offering $100 off a remote tune if you buy both together until May 31, 2023. Single and dual wideband versions in stock as of now.

Virtual Dyno charts available for remote tuning once tuning is complete

01/11/2023

ECUs are already selling fast: Ahead of the usual rush this year. m50/s50 and m52/s52 are out of stock, but we do have a couple of these VW68s in stock for now. We have a couple of econoseal wire-in ECUs as well, message for details on the Econoseals. We aim to be fully stocked up by mid February on everything.

VW ABA and VR6 owners rejoice! Announcing a direct fit ECU for the mk3 application with the slide-lock 68 pin connector. Upgrade your car with our fully programmable ECU in a matter of minutes without any wiring nightmare. Infinitely tunable so if you change parts you don't need to pay for another f...

12/28/2022

We ordered a V3MS Dash from Itapol Racing in Slovakia a few weeks ago. It arrived last week, but just now got time to film a quick unboxing. Next week I'll make a short video connected to an ECU to see data.

Available here: http://v3msdash.italpolracing.sk/index.html

12/28/2022

A short teaser video of a Dash7 on an actual car we had in the shop. this is just out of the box, powered on and plugged into the ecu serial port. Oil pressure alarm is because we don't have oil pressure input into the ecu or dash. That can be disabled, of course. Or even better hook up the sensor. 😁

A more in depth video with benchtest ecu will follow when we get an opportunity.

11/27/2022

Weekend work on a harness for a 1.8t Golf hillclimb car. Waiting on 3 connectors we didn't have in stock. Otherwise the engine side is done. Ecu side will be completed tomorrow. This is a hybrid fiberglass and dr-25 loom which provides excellent abrasion and heat resistance with keeping labor and material costs more reasonable than completely dr-25. Contact us if you have any custom wiring needs. Anything from a small sub-harness to entire car.

10/06/2022

A little sneak peek at a project we've been working on and off on for years. Wired the entire chassis with a custom made harness, fuse/relay box, custom engine harness, and VEMS ecu. Taking care of the last little details that pop up before tuning. Tonight Nick Montgomery and Jason performed extensive intake leak testing, synced the 8 throttles and got the airflow balanced, cooling system finally bled, and injector settings roughed in. Muffler artwork by Holler Customs.

09/27/2022

Two vw68 ecus ready to roll. One obd1 and one obd2 drive-by-wire. Store has been updated and ships within 24 hours. https://shop.vemstuning.com/products/pre-sale-vems-vw-mk3-direct-plug-in-ecu

09/25/2022

Weekends are for catching up, right? We were in the shop today finishing a batch of frontplates for the vw68 ecus. 3 will be going in stock ready to ship this week, with more to follow. The "extra" connectors are out of stock everywhere, so we're evaluating options as we are almost out. Email [email protected] if you'd like to be notified when they are ready to ship. Or keep an eye here, we'll make a post. Thanks, hope you all had an amazing weekend.

09/15/2022

We just got a bunch of 5v 4bar external MAP sensors in the US if anybody has been waiting for them. https://shop.vemstuning.com/products/vems-400-kpa-4-bar-map-sensor?variant=20116234698825

09/05/2022

We had a busy and productive labor day today. Finished up this VW68 pnp for OBD1 to ship out this week and got another OBD2 DBW assembled and tested.

08/01/2022

ECU and custom engine harness for a Mazda 323gtx. We don't see those cars around anymore. Added a small switch with high/low boost option at the client's request.