Panther Airboats

Panther Airboats Custom airboats, parts and repairs. The undisputed leader in quality and craftsmanship for nearly 50 years. Panther Airboats is your one stop shop.

Panther Airboats manufactures the worlds #1 hands down best performing,quality,looking,handling and custom built AIRBOATS to meet any expectations you may need in the WORLD!!! once you drive one of our machined and built in house patented GEAR TO GEAR COUNTERROTATORS!! you will not settle for anything less than a Panther! Panther is family owned and operated for over 50 years and counting. all our

customers are treated like family, and once you buy a boat or even parts from our parts department you will become part of the beloved Panther Airboats family! call us today and become one of our newest to the Panther family!!! we look forward to seeing you soon!

Custom Panther 19’ x 8’ Lightning Edition This completely custom holiday-themed build included:Levitator MS70 7.0 525 HP...
06/07/2026

Custom Panther 19’ x 8’ Lightning Edition

This completely custom holiday-themed build included:
Levitator MS70 7.0 525 HP engine
3-blade 79” Whirlwind composite propellers
50-gallon gas tank
Dual bilge pumps with automatic fill switch
Side x Side rear operator and 2 big man passenger seats
Split passenger seat dry box with flip-forward lids
Custom red/green holiday-themed seat cushions
6” walk boards
Non-skid finish on floors and walk boards
Custom powder coated dry box storage
Stainless Steel engine stand and rigging
Saltwater Series custom trailer from B&S Trailers

Interested in a custom airboat? Call us at 321-632-1722 or email [email protected] for a quote!

Introducing the latest custom Panther Thunder Edition 18'x8' decked out with:- Levitator MS 70 7.4 Litre LSX engine - Pa...
05/29/2026

Introducing the latest custom Panther Thunder Edition 18'x8' decked out with:

- Levitator MS 70 7.4 Litre LSX engine
- Panther gear-to-gear counter rotator
- Dual 8-blade Razor-X WhirlWind Propellers
- Flush-mounted rod holders in walk board
- (3) 4-bank rod holders
- Buttraxx Inc. Custom Airboat Seats
- Custom SeaDek by Unmatched Marine
- 50-gallon gas tank
- 2 bilge pumps with automatic fill switch
- Recessed 42" LED light bar
- Blue LED light package installed under walk-arounds
- Custom dry storage, seat boxes, paint and powder coat to customer specs

For sale is a used 2006 Panther AirboatSize: 20' x 7' 10"Condition: GoodEngine: 496 big blockGear Box: 2.12 Panther Rota...
04/20/2026

For sale is a used 2006 Panther Airboat

Size: 20' x 7' 10"
Condition: Good
Engine: 496 big block
Gear Box: 2.12 Panther Rotator
Prop: 78" Warp Drive Turbo Prop
Polymer: 3/8"
Seating arrangements: single rear driver, quad medium height center with triple front on aluminum dry boxes
Gas tank: dual tanks

Trailer: Rolls Axle aluminum trailer

Asking price: $30,000.00 OBO for airboat and trailer.

If interested give us a call at 1-800-airboat or send an email to [email protected]

We are deeply saddened to share the passing of one our long-time employees and friend, Mike Baker.Mike was a valued part...
04/19/2026

We are deeply saddened to share the passing of one our long-time employees and friend, Mike Baker.

Mike was a valued part of the Panther Airboats family for over 6 years. His passion for airboats and dedication to Panther was undeniable. He had an impressively vast wealth of knowledge for airboats and truly took pride in his work.

To us, Mike was not just an employee, he was part of our family. Over the years, he built lasting relationships throughout the airboat community, from customers to vendors, all over the world. Chances are if you have called Panther over the years you have talked to Mike. His presence in our office and in the airboat world will be deeply missed.

We will share memorial arrangements as soon as they are available.

In the meantime, we invite you to share a memory or story about Mike in the comments. We know many of you were fortunate enough to know him, and we would love to celebrate his life together.

03/11/2026
THE LATEST 18' X 8.5' CUSTOM PANTHER WORK BOAT IS HEADING OFF TO TEXAS. THIS BUILD INCLUDED:- LEVITATOR MS70 7.4 LITER L...
03/10/2026

THE LATEST 18' X 8.5' CUSTOM PANTHER WORK BOAT IS HEADING OFF TO TEXAS. THIS BUILD INCLUDED:

- LEVITATOR MS70 7.4 LITER LSX
- WhirlWind Propellers EX 3-BLADE 82" PROPS
- SIMRAD GO9 XSE GPS WITH 9" DISPLAY
- 8' CM2.0 PRO II SERIES POWER-POLES
- 30" GRASS RAKE
- 28" SIDES WITH 10" SPLASH PLATE
- SIDE-MOUNTED JUMP SEATS
- EXTENDED BACK FOR EASY ACCESS TO ENGINE
- WEBBED INTERIOR WITH NON-SKID FINISH ON
FLOORING/WALK-AROUNDS
- 6" WALK-AROUNDS
- 8" STAINLESS CLEATS
- FLUSH MOUNTED DRY BOX STORAGE
- CUSTOM DRY BOX WITH EASY ACCESS TO POWER-POLE PUMP
- 3/8" POLYMER BOTTOM
- 42" RECESSED LIGHT BAR IN GRASS RAKE

CONTACT US TODAY TO QUOTE YOUR NEW CUSTOM BOAT (MON-FRI 8AM-5PM EST)

PHONE: 321-632-1722 OR 1-800-AIRBOAT

E-MAIL: [email protected]

This 24x9 Panther Thunder was designed and built to meet all USCG standards while delivering a clean, professional look ...
02/25/2026

This 24x9 Panther Thunder was designed and built to meet all USCG standards while delivering a clean, professional look to match the customer's current fleet.

Specs:

⚡️Flush mounted deck storage with all stainless hardware

⚡️24” grass rake

⚡️Side-by-side rear operator with custom-built “big head” instrument panel

⚡️2-hoop hybrid (pancake-style) stainless prop guard

⚡️3 rows of passenger seating

⚡️Custom paint and powder-coat to match their current fleet

If you are adding to your tour fleet, let us build something that works as hard as you do!

Call 321-632-1722 or 1-800-AIRBOAT for a quote today (MON-FRI 8AM-5PM EST) or send us an email: [email protected]

Check out this 14'x8' Panther Thunder hull:Dual access doors on bow20" sides 24" grass rake with door8" walk aroundsChar...
02/13/2026

Check out this 14'x8' Panther Thunder hull:
Dual access doors on bow
20" sides
24" grass rake with door
8" walk arounds
Charcoal gray non-skid

Give us a call, 1-800-airboat, or send us a message for a quote for your next build.

Another happy customer!12'x7'6" complete .125 Panther Thunder hull16" sides with 6" layback18"grass rake with flush moun...
02/03/2026

Another happy customer!

12'x7'6" complete .125 Panther Thunder hull
16" sides with 6" layback
18"grass rake with flush mount step
6" walk arounds from transom to bulkhead
Dual access doors on bow

Contact Panther airboats at 1-800-airboat for your next build.

Another 22'x9' Panther Lightning Hull loaded up and heading out west. This hull was built to the customers specs to fit ...
02/01/2026

Another 22'x9' Panther Lightning Hull loaded up and heading out west. This hull was built to the customers specs to fit their preexisting rigging.

If you have any questions or interested in a new hull/rigging, you can send us a message or give us a call 1-800-airboat Monday-Friday 8am-5pm.

Address

300 N Wilson Avenue
Cocoa, FL
32922

Opening Hours

Monday 8am - 5pm
Tuesday 8am - 5pm
Wednesday 8am - 5pm
Thursday 8am - 5pm
Friday 8am - 5pm
Saturday 8am - 12pm

Telephone

+13216321722

Alerts

Be the first to know and let us send you an email when Panther Airboats posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Share