West Penn Performance

West Penn Performance Manufactures the hardware and produces the software for MMCDroid, as well as PA Pinch. And is run by one person. Who is overworked.

05/26/2021
05/22/2021

First cuts on the new machine :)

Customer's ex boyfriend took a nutty and reduced the car to this in the timespan of ~11 hours. Car was running prior. He...
03/24/2014

Customer's ex boyfriend took a nutty and reduced the car to this in the timespan of ~11 hours. Car was running prior. Here are the PTS's:
-Dented oil pan
-Bent oil pickup strainer
-Cut SS brake lines
-Timing belt removed
-Engine was likely ran without timing belt on it, has bent valves (which was the latest discovery after putting a new 60K kit onto it)
-Engine subframe half dropped
-DS wheel bearing nearly falling out
-Driveshaft unbolted from frame
-Missing transfer case end bolts, leaking as a result
-Transfer case missing two tcase to trans mount bolts
-Parking brake bolts ripped out of frame (still attached to the brake)
-Lots of rewiring fun required
-Missing both front axle nuts
-Oil cooler line pinched and leaking

Dem intake ports, doe...
12/27/2013

Dem intake ports, doe...

05/26/2013

A free firmware upgrade is available for MMCdroid - please contact me via email at [email protected] for information on how to obtain this upgrade. This fixes a problem where the device would occasionally return zeros instead of the actual value.

Test panel update will be released tomorrow - this will enable you to disable injectors, test the fuel pump, pull CEL co...
03/22/2013

Test panel update will be released tomorrow - this will enable you to disable injectors, test the fuel pump, pull CEL codes, and clear stored faults. I'll post on twitter when it's released: https://twitter.com/frozenapps

The latest from Ryan Detwiler (). Punxsutawney, PA

Figured I'd share this with you guys - this is my personal car: http://www.youtube.com/watch?v=UXxRJRUUKWk&feature=youtu...
03/11/2013

Figured I'd share this with you guys - this is my personal car: http://www.youtube.com/watch?v=UXxRJRUUKWk&feature=youtu.be

Pretty exciting after 4 years of construction ^_^ 3SX T3/T4 kit, 59mm compressor wheels 3SX dual pump/dual feed kit (two Walbro 255's) AEM EMS Dual core FMIC...

All orders have been shipped from the group buy - expect the website to be restocked with 1G adapters within the next co...
02/20/2013

All orders have been shipped from the group buy - expect the website to be restocked with 1G adapters within the next couple days. I will announce when - also, I've added a T-shirt to the website ;) http://frozenapps.com/tshirt.php

12/22/2012

May have just found a way to increase logging speed by 8x for 1G DSM guys with EPROMs.... o_O

Kill me...?? :P Time to do work.
12/03/2012

Kill me...?? :P Time to do work.

Address

1264 Anderson Drive
Clarion, PA
16233

Opening Hours

Monday 8am - 8pm
Tuesday 8am - 8pm
Wednesday 8am - 8pm
Thursday 8am - 8pm
Friday 8am - 2:30pm

Website

Alerts

Be the first to know and let us send you an email when West Penn Performance posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Share