Suspension Done Right, LLC

Suspension Done Right, LLC We strive to provide the best in Custom Suspension Setups for Handling, Comfort, Safety & Performance

Customized Suspension and Modifications for Off Road Motorcycle including MX, SX, AX, and Enduro, Street Bikes, Adventure Bikes, as well as Touring and Sport Touring Bikes, ATV's, and UTV's.

25 years later.Still remembered. Never forgotten.
09/11/2026

25 years later.
Still remembered. Never forgotten.

Built for the Track.07 GSXR 600190 lbLocal / BTrack-only bikeSpring and valve work changed the game. Built with purpose,...
08/26/2026

Built for the Track.

07 GSXR 600
190 lb
Local / B
Track-only bike

Spring and valve work changed the game. Built with purpose, tuned for performance, and ready to put the power where it matters: on the track.

No street miles. No shortcuts. Just setup, suspension, valves, and seat time.

Built for the Rider. Built for GNCC.2025 CRF450RLSet up:210 lb male rider45+Local / BGNCC setupBuild info:Stock tank ret...
08/24/2026

Built for the Rider. Built for GNCC.

2025 CRF450RL
Set up:
210 lb male rider
45+
Local / B
GNCC setup

Build info:
Stock tank retained
Springs and Gold Valves front and rear

This setup is about putting the bike underneath the rider, not forcing the rider to adapt to the bike. Proper spring rates and valving front and rear give this CRF the support, control, and consistency needed when the terrain gets rough and the race gets long.

No stickers per customer request.

Necessity Is the Mother of Invention24 YZ85 LW, front and rear setup.After seeing bikes picked up and loaded in just abo...
08/21/2026

Necessity Is the Mother of Invention

24 YZ85 LW, front and rear setup.

After seeing bikes picked up and loaded in just about every possible way over the years, and into just about every type of vehicle, this one might be my new favorite.

One ratchet strap from the right side of the bars down to the right front wheel/axle spacer. A half-dozen clicks to compress the front end just a little, drop the front wheel down onto the floorboard, and into the minivan it went.

Zero tie-downs holding the bike upright.

Sometimes you don't need a trailer, truck, or fancy setup. You just need to think outside the box and work with what you've got.

2024 Husqvarna FC 450 Rockstar Edition. Built to ride, built to stand out.Factory-inspired graphics by Suspension dial...
08/20/2026

2024 Husqvarna FC 450 Rockstar Edition. Built to ride, built to stand out.

Factory-inspired graphics by
Suspension dialed in by SuspensionDR

Ready to rip🤘

Hinson Clutch Basket Build.This is the kind of detail that separates a quality build from an average one.Not a single gr...
07/27/2026

Hinson Clutch Basket Build.

This is the kind of detail that separates a quality build from an average one.

Not a single grind mark on the stock backing plate. Zero shortcuts. Every part is carefully fitted and finished the right way.

We take extreme pride in our craftsmanship because the work you don't see is just as important as the work you do.

That's the standard. Every build. Every time.

From a pile of parts to back on the trailHere's the '96 Suzuki DR350 after getting put back together with components fro...
07/17/2026

From a pile of parts to back on the trail

Here's the '96 Suzuki DR350 after getting put back together with components from us. We asked the customer to send a photo once the build was finished, and they came through with this great shot.

Nothing beats seeing these old machines back where they belong—running and riding.

Thanks for sharing the finished bike with us!

Another bike headed out the door.This 2026 KTM SX-E 5 received a complete MX Only suspension setup for a 48 lb rider. Th...
07/13/2026

Another bike headed out the door.

This 2026 KTM SX-E 5 received a complete MX Only suspension setup for a 48 lb rider. The customer requested we leave the decals off, proving one thing—performance doesn't need to advertise itself.

Every build is tailored to the rider. Correct spring rates, proper valving, and a setup that delivers confidence on the track.

Built for speed. Tuned for results.

Back to Washington These forks are headed home for a 2009 Honda Gold Wing GL1800—a bike we've already set up front and r...
07/06/2026

Back to Washington

These forks are headed home for a 2009 Honda Gold Wing GL1800—a bike we've already set up front and rear before relocating from Washington to Alabama.

Rider Profile:
- 185 lbs
- Highly experienced rider
-Multi-decade sales professional for a multi-line motorcycle dealership
- Aggressive canyon riding
- Street, touring, and daily commuting

This isn't our first build for this customer. In fact, this is the third Gold Wing we've dialed in for them.

That kind of loyalty isn't something we take lightly. When someone who has spent decades selling motorcycles across multiple brands and continues to trust us with every Gold Wing they own, it drives the point home.

Even after our move across the country, they continue shipping their suspension to us because they know the difference a properly engineered setup makes.

Every rider is different. Every bike is different. That's why every suspension build is tailored to the rider—not pulled from a generic settings sheet.

A properly engineered suspension setup also has to be serviced thoroughly and meticulously. There is no room for pump-and-dump service when you're chasing consistency, control, and confidence.

This is the kind of work that demands full OCD-level attention to detail from start to finish.

That's Suspension Done Right.

RACE TECH

Address

3784 Lee County Road 254
Salem, AL
36874

Opening Hours

Monday 8am - 5pm
Tuesday 8am - 5pm
Wednesday 8am - 5pm
Thursday 8am - 5pm
Friday 8am - 5pm
Saturday 8am - 5pm

Telephone

+13346509895

Website

Alerts

Be the first to know and let us send you an email when Suspension Done Right, LLC posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Suspension Done Right, LLC:

Shortcuts

Share

Category