Rock Solid Offroad Fabrication

Rock Solid Offroad Fabrication Rock Solid Off Road Fabrication is a business focused on creation of one of a kind, top of the line parts for off road based vehicles.

Exhaust is finished! Fully mirrored and all the way out the rear! That 4 link kit looking killer!
03/29/2026

Exhaust is finished! Fully mirrored and all the way out the rear! That 4 link kit looking killer!

Getting the exhaust really rolling working around this JL 4 link kit! Dual 3 " 304 stainless steel all the way out the ...
03/27/2026

Getting the exhaust really rolling working around this JL 4 link kit! Dual 3 " 304 stainless steel all the way out the back so that Hellephant swap can breathe!!!

Finally to the point of building the mirrored exhaust around that JL suspension setup! Most builders will dump the exha...
03/14/2026

Finally to the point of building the mirrored exhaust around that JL suspension setup! Most builders will dump the exhaust right after the rear lower cross members because it's quite difficult to go past that. Have you met me? I'm not most builders. We will be routing the exhaust all the way out the rear! Changing it up a bit on this one, running 304 stainless steel mufflers. Excited to see how that Hellephant conversion kit sounds when I'm done!

So does this make me an artist?Hard hard push to get this wrapped up before 2026! With top tier products from , , , ...
03/03/2026

So does this make me an artist?

Hard hard push to get this wrapped up before 2026! With top tier products from , , , , , , and the best Hemi conversion package in the industry from , this build will be hard to top!

02/28/2026

A little , a little , a little bespoke by your's truly, and a whole lotta bad ass. Yep, it feel good to stack some files on a Saturday while prepping our JL for 2026!

Finishing up a new transfer case skid plate for Sushi and as they get ready for the 2025 24 Hour Hell and back challeng...
08/27/2025

Finishing up a new transfer case skid plate for Sushi and as they get ready for the 2025 24 Hour Hell and back challenge! Trust me, this is gonna be an absolute hilarious and fun to watch season, so stay tuned and subscribe to their YouTube channel if you haven't already!

Nothing but the best to protect this new equipment from corrosion while allowing for easy touch up!

Got about a third of the way through with the new exhaust for the hellcat JK I've been building for . Its a strong love...
08/10/2025

Got about a third of the way through with the new exhaust for the hellcat JK I've been building for . Its a strong love/hate relationship building stainless exhaust systems. If I can get the fit up perfect, it's therapeutic... But when you're working with tolerances as tight as these, it can be extremely tedious. These and high flow green cats are a standard feature on all of our JK Hemi conversions, but we typically hook those up to an cat-back. In this case, due to the suspension, it wasn't even close to working, so we stepped up to some 3.5" pipe and a muffler to let that 1000 HP hellcat breath!

Another batch of JL 3 link brackets going out. These were designed specifically to work with 392 JLs using the front 3 ...
05/12/2025

Another batch of JL 3 link brackets going out. These were designed specifically to work with 392 JLs using the front 3 link system and 14" ORI Struts with the Motobilt ORI towers! The customer also ordered our JL offset track bar mount, which allows you to run a parallel and equal length track bar and drag link to 100% eliminate bump steer!

392 JL with our stage 5 performance package going back together after the installation of our own cage kit! This one is ...
03/13/2025

392 JL with our stage 5 performance package going back together after the installation of our own cage kit! This one is a V2 with the ACC windshield bars! Check out for more information on the build as this one has a LONG list of upgrades getting completed!

has been working hard all day fitting up our CNC JLU cage kit. Did you know this kit was first to market by over a year...
02/11/2025

has been working hard all day fitting up our CNC JLU cage kit. Did you know this kit was first to market by over a year? Still the nicest, most complete, most thought out, and best looking JL cage on the market! Excited to get this one knocked out!

Every time we sell one of our patented JL, JT, JK ABS kits, we get asked: "what do you guys do for the rear?" Well, up u...
01/16/2025

Every time we sell one of our patented JL, JT, JK ABS kits, we get asked: "what do you guys do for the rear?" Well, up until now, we've told folks to buy the Artec JK rear kit and modify it to fit the JL/JT because they never released a kit specifically designed for the JL/JT sensor. While we have no plans to make a JK sensor kit (we will continue to refer folks to Artec for that) we will be releasing a JL/JT bracket kit with mounts and tone rings to make swapping a 14 bolt into your Jeep that much easier. Also, due to the much simpler design, the pricing will be WAY cheaper than our front kits. We will also offer a discount if you purchase front and rear kits at the same time.

Stay tuned for the official release!

Address

Chattanooga, TN
37406

Opening Hours

Monday 9am - 6pm
Tuesday 9am - 6pm
Wednesday 9am - 6pm
Thursday 9am - 6pm
Friday 9am - 6pm

Telephone

(423) 619-4085

Website

Alerts

Be the first to know and let us send you an email when Rock Solid Offroad Fabrication posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Rock Solid Offroad Fabrication:

Shortcuts

Share

Category