Motor Wheel - Chattanooga

Motor Wheel - Chattanooga Motor Wheel CentriFuse® brake drums and MW brake adjusters are engineered & manufactured in the USA.

Today, we pause to remember and honor the lives lost on September 11, 2001.As we reflect on this day, we remember those ...
09/11/2026

Today, we pause to remember and honor the lives lost on September 11, 2001.

As we reflect on this day, we remember those we lost, honor those who served, and recognize the resilience that continues to unite us.

Keeping the commercial vehicle industry moving takes dedication at every turn.This Labor Day weekend, Motor Wheel thanks...
09/04/2026

Keeping the commercial vehicle industry moving takes dedication at every turn.

This Labor Day weekend, Motor Wheel thanks the drivers, technicians, fleet managers, maintenance professionals, and countless others whose hard work keeps goods moving across North America every day.

We appreciate all that you do. Happy Labor Day from Motor Wheel!

As Brake Safety Week comes to a close, the importance of brake inspections and maintenance continues year-round.This wee...
08/28/2026

As Brake Safety Week comes to a close, the importance of brake inspections and maintenance continues year-round.

This week served as a reminder of the critical role brake system maintenance plays in keeping commercial vehicles operating on the road. Regular inspections of brake drums, rotors, and other brake components can help identify wear before it becomes a larger issue.

If you're looking for additional brake drum resources, technical literature, or support, Motor Wheel is here to help.
📂 Browse our literature library: https://www.motorwheel-intl.com/literature.html
📞 Connect with our team: https://www.motorwheel-intl.com/contact.html

Thank you to the drivers, technicians, fleet managers, and owner-operators who help make brake inspection and maintenance a priority every day.

08/21/2026

Brake Safety Week starts next week. Are your drums inspection-ready?

CVSA's Brake Safety Week (Aug. 23-29) will place special focus on brake drums and rotors. A few minutes spent checking drum wear today can help identify issues before they become violations tomorrow.

Watch as Jeff from Motor Wheel demonstrates:
✅ Proper drum wear measurement techniques
✅ Key measurement locations
✅ When replacement is required
✅ How drum wear affects brake adjustment

Need more information? Visit motorwheel-intl.com to learn about Motor Wheel CentriFuse® drums.

08/14/2026

When it's time to replace a drum, do you know where to find the right part number? 🛠️

As we gear up for CVSA's Brake Safety Week from August 23-29, we want to ensure you have all the information you need to keep your fleet compliant and on the road.

In this video, Jeff walks you through the process of identifying the part number on a Motor Wheel CentriFuse drum so that you can order the exact replacement you need.

🔗Find more information about our CentriFuse drums here: https://www.motorwheel-intl.com/centrifuse.html

08/07/2026

📆CVSA Brake Safety Week is coming Aug. 23–29!

This year inspectors are zeroing in on Brake Drums & Rotors.

Broken and heat-cracked drums don’t just fail inspections; they can put pieces on the highway. That’s why CentriFuse® drums are built with a permanently bonded steel shell for proven resistance to heat cracks.

Follow along with us through August for quick tips to inspect, measure, install and spec your drums with confidence.

🔗CVSA's 8 Brake Drum and Rotor Tips:https://cvsa.org/wp-content/uploads/2026-BSW-Flyer-English.pdf

The most common cause of improper brake drum mounting is failing to locate one hub pilot pad at the 12:00 position. This...
07/31/2026

The most common cause of improper brake drum mounting is failing to locate one hub pilot pad at the 12:00 position. This causes the drum to sit slightly cocked, a condition that is frequently mistaken for an out-of-round drum.

Always start with the hub pilot at 12:00, slide the drum into place, and verify it is fully seated before reinstalling the wheel and tire.

The carousel below provides a step-by-step look at proper CentriFuse® brake drum installation, from hub alignment to final torque.

⏰ Reminder: Re-torque after 50 to 100 miles, after tire changes, or anytime wheel nuts are removed.

📂 Download the complete MW014 Drum Brake Installation Procedure:https://www.motorwheel-intl.com/pdf/MW014_Brake_Drum_Install_Procedure.pdf

An Automatic Brake Adjuster is a critical component, and regular inspections are essential. Motor Wheel supports TMC's r...
07/15/2026

An Automatic Brake Adjuster is a critical component, and regular inspections are essential. Motor Wheel supports TMC's recommendations to inspect the ABA and air chamber performance every month, 8,000 miles or 300 operating hours, whichever comes first.

The carousel below provides a quick guide on inspecting your Motor Wheel ABA.

For the complete inspection guide, click here:https://www.motorwheel-intl.com/pdf/MWT002_ABA_Install.pdf

This weekend we celebrate 250 years of the American spirit. The past 250 years have shown our collective strength in inn...
07/03/2026

This weekend we celebrate 250 years of the American spirit. The past 250 years have shown our collective strength in innovation and our resilience as a nation. As we commemorate this semiquincentennial Independence Day, we honor the history that shaped us and are excited for the progress that lies ahead.

Happy Independence Day!

Address

2660 Sydney Street
Chattanooga, TN
37408

Telephone

+18557433733

Website

Alerts

Be the first to know and let us send you an email when Motor Wheel - Chattanooga posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share

Category