Inline Autowerks

Call Directions Website Contact the business

Inline Autowerks European performance and repair

Reassembling this R56 MCS cylinder head after returning from the machine shop with a fresh set of intake/exhaust valves ...
11/28/2021

Reassembling this R56 MCS cylinder head after returning from the machine shop with a fresh set of intake/exhaust valves and guides

10/03/2021

Awesome weekend at VIR for OFest at ! The e30 transformation started tomorrow and I already can’t wait for next year

Getting deep into this F16 X6 for a crank no start diagnosis. I discovered that there was no ground signal to the DME fr...
09/14/2021

Getting deep into this F16 X6 for a crank no start diagnosis. I discovered that there was no ground signal to the DME from the IVM and an open circuit from the IVM to the DME . After de-pinning the ground wire at the IVM and DME, I found this very small section of wire that had a small tear in the insulation and moisture corroded the wire. A light pull on the damaged section caused the wire to crumble in my hand. I replaced the ground wire and installed new pins then this X6 was ready to hit the road.

One month until NCE30] Oktoberfest! Who else is getting in some last-minute prep? ...
08/31/2021

One month until NCE30] Oktoberfest! Who else is getting in some last-minute prep?







NCE30]

08/30/2021

Found out that cylinder #1 injector is failing after finding out it is leaking down/ over-fueling the cylinder and the culprit to an occasional stumble on warm start-up and bank 1 rich mixture faults

This e70 x5 is ready for the n62tu to be dropped out and have a fresh set of Valve stem seals replaced due to excessive ...
08/28/2021

This e70 x5 is ready for the n62tu to be dropped out and have a fresh set of Valve stem seals replaced due to excessive oil consumption and clouds of smoke being seen by the customer and idle and under heavy acceleration.

I couldn’t let National Dog Day pass without giving a shout out to the best shop pup there is! ...
08/27/2021

I couldn’t let National Dog Day pass without giving a shout out to the best shop pup there is!

It’s not everyday that you see a Lamborghini Urus out and about…Or get the chance to work on one!Installed a set of to...
08/25/2021

It’s not everyday that you see a Lamborghini Urus out and about…
Or get the chance to work on one!

Installed a set of to get rid of some fender gap and give an aggressive, yet, subtle look

New week new alternator, valve cover gaskets, and upper timing cover gaskets 🔧 ...
08/10/2021

New week new alternator, valve cover gaskets, and upper timing cover gaskets 🔧

Address

Charlotte, NC

Telephone

+13369780009

Website

Alerts

Be the first to know and let us send you an email when Inline Autowerks posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Inline Autowerks:

Shortcuts

Share

Category