Denver Wiring Solutions

01/10/2024

We have been wide open here at DWS. Here is a quick steering wheel job we knocked out for a local customer. Shoot us a message with any of your automotive wiring or plumbing needs.

09/03/2023

No job is too small. Did a quick install of this autometer boost gauge for a customer today...

08/17/2023

This drop top fox came to us for some major upgrades. We pulled the motor and upgraded the heads, cam, intake. We installed a cam sync and and crank trigger and remote mounted a set of LS coils. We finished up the motor by slapping a fresh coat of black on it to match the car.

To match the new power we added a Tremec T56 and badass Centerforce Clutches hydraulic clutch setup.

Next, we installed a Team Z Motorsports front end, we fabbed up some mounts for the radiator and intercooler and got the front end mounted up like new!

For the Holley system we did a complete rewire with sensors, including flex fuel, switch panel, I/o box. We installed a 6.86 dash to help keep all the data right there.

In true street car fashion we wired in the Motion Raceworks trick column and turn signal switch.

Strange Engineering brakes installed up front to help get this thing slowed down while saving a ton of weight!

The interior was wrapped up with painting the existing cage and some fresh carpet.

Please shoot us a PM for your motorsports needs!

05/29/2023

Had a local Team Denver racer swing by for a few upgrades on his new ride. We started with removing the interior to prepare it for a badass Rock Solid Motorsports 8.50 cage. Once back from RSM we fabricated some brackets for the Kirkey Racing Fabrication Inc. seats. We paired them with a pair of Simpson Race Products cam locks. This street cruiser got a new Kenwood head unit and speakers. We finished off the interior with a custom carpet install.

To help get this thing stopped we installed a set of TBM Brakes. We also upgraded the master/pedal to achieve the correct pressure and pedal ratio, something that is often overlooked.

For the wiring we moved the Holley ECU and added their trick I/O box. Added a custom switch panel to the center console, and mounted the relay board under the Shrader Performance rear seat delete for that ultra clean look. Keeping this street car street, we rewired the turn signals, power windows, and headlights utilizing parts from Motion Raceworks.

Give us a shout if we can assist in your motorsport wiring and plumbing needs.

05/23/2023

Fresh outta DWS Headquarters we wrapped up a few trick things on this nasty Turbo Coyote. It started with a complete overhaul to the fuel system which included new Modular Motorsports Racing - MMR rails, new T.I. Performance pumps, a Fore Innovations, LLC regulator and new wiring for the system. We installed a badass BMR Suspension Anti Roll Bar to help keep this thing planted. We finished it off with a Shrader Performance rear seat delete to keep that clean look. Look for this Coyote on a street near you soon!

Shoot us a message for any of your motorsport wiring or plumbing needs.

02/20/2023

A little steering wheel wiring to close out the week. Started out with an MPI - Max Papis Innovations wheel, we love these things! We added a few goodies from Motion Raceworks Including their mono cord systems to keep everything super clean!

We have been slammed packs lately and will be catching up on messages and calls this week.

Give us a shout if we can help with your wiring needs.

02/07/2023

Had a few SXS swing by for more DWS upgrades.

We installed some rock lights and a windshield wiper motor on the Yamaha Wolverine. You may recall this unit from a previous post as we did a full Street Legal conversion on it.

The Polaris RZR came in for a full Street Legal conversion. We did all new lights, electric wipers, consolidated switches into a switch panel and cleaned up the existing wiring. Look for this unit hauling the mail down the road or on the trail!

Shoot us a message if we can help make your dream a reality.

01/15/2023