Street Rod Engineering

Street Rod Engineering We've been building quality hot rod Mustang II suspensions for the last 30 yrs. We manufacture MII cross members and control arms right here in the USA!

Starting the tear down of the 1951 Ford roadster. We will be installing our 1949 - 51 Ford subframe. You will get to s...
01/01/2021

Starting the tear down of the 1951 Ford roadster. We will be installing our 1949 - 51 Ford subframe. You will get to see just how easy it is!

1950 Studebaker Truck fully boxedwith 3/16” plate steel. Triangulated 4-link is next.
01/29/2020

1950 Studebaker Truck fully boxedwith 3/16” plate steel. Triangulated 4-link is next.

Installing a MII IFS with full boxing plates on a 1950 Studebaker truck. We are not a cookie cutter Ford and Chevy shop...
01/25/2020

Installing a MII IFS with full boxing plates on a 1950 Studebaker truck. We are not a cookie cutter Ford and Chevy shop (although we do those too). We try to help everyone we can, call us with your unique rides!

Project Grumpy Old Van update. Front end is out and fine tuning the ride height. 4” drop in the front, 3” in the rear....
01/20/2020

Project Grumpy Old Van update. Front end is out and fine tuning the ride height. 4” drop in the front, 3” in the rear. This is a critical step. If you don’t have the right stance (tires, rims, rim offset, rake, turning radius) then even an expensive paint job won’t make it look right. Was having a hard time visualizing rake with all the rust holes, so I improvised and used some cheap painters tape to give it a solid look on the bottom half.

Time to start designing the MII IFS and Triangulated 4-link.

The suspension upgrade on project Grumpy Old Van has started. Plans are MII and triangulated 4-link. More pics to come...
01/14/2020

The suspension upgrade on project Grumpy Old Van has started. Plans are MII and triangulated 4-link. More pics to come. Rearend and springs will be available for free, along with the front axle. Contact me if you are interested.

Of course the last bolt to come out is being stubborn. We’ll have to melt the rubber bushing out with a torch.

Today we are bending 1” tubular dom for lower control arms. Check out the thickness of metal, 3/16” wall. We list it o...
01/09/2020

Today we are bending 1” tubular dom for lower control arms. Check out the thickness of metal, 3/16” wall. We list it on all our parts. Our competitors use weaker steal, but you can’t see it after welded. Make sure you ask them if you order from someone else!

It’s an addiction. Look for a MII kit for first generation Econolines late winter or early spring!
10/30/2019

It’s an addiction. Look for a MII kit for first generation Econolines late winter or early spring!

Sometimes when you need room you have to come up with different solutions. Moveable engine towers, each engine can be r...
05/27/2019

Sometimes when you need room you have to come up with different solutions. Moveable engine towers, each engine can be removed individually. 4 nailheads and one y-block. One more tower to go for the remaining nailhead, y-block and Caddy.

Jake finish welding the Deuce.
09/07/2018

Jake finish welding the Deuce.

Hanging out at the Goodguys Heartland Nationals this weekend. Stop and say Hi!
06/29/2018

Hanging out at the Goodguys Heartland Nationals this weekend. Stop and say Hi!

Address

1120 I Avenue NE
Cedar Rapids, IA
52404

Opening Hours

Monday 9am - 3:30pm
Tuesday 6:30am - 3:30pm
Wednesday 6:30am - 3:30pm
Thursday 6:30am - 3:30pm
Friday 6:30am - 3:30pm

Telephone

+13193508092

Website

Alerts

Be the first to know and let us send you an email when Street Rod Engineering posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Street Rod Engineering:

Shortcuts

Share

Category