Legacy Custom Fabrication

Legacy Custom Fabrication Chassis, suspension, roll cages, tig welding, sheet metal work, custom headers, custom cut rearends, transmission builds, You think it up, I'll tackle it!

Sending this one home. 70 Nova. When it came it looked like it sat in the mud for 20 years. Front sub frame blasted a...
12/16/2023

Sending this one home. 70 Nova. When it came it looked like it sat in the mud for 20 years. Front sub frame blasted and powdered, then reassembled with all new equipment. Built a 9 inch with posi, Moser axles, 3.70 gear, disc brakes for it and ditched the leaf springs and went to modified 4 link with coil overs. Fixed lower portion of firewall and body mount locations, aswell as all floor areas and trunk. The owner is a body guy so it's going back to him for that then will come back for motor transmission and final chassis adjustments. Iowa rust repair is always a challenge but turned out great!

Well.... Tomorrow I start a new chapter in my life. I was offered an amazing opportunity and i accepted. I will say I ...
12/03/2023

Well.... Tomorrow I start a new chapter in my life. I was offered an amazing opportunity and i accepted. I will say I was not looking for a different gig because I enjoy everything I do here at Legacy Custom Fabrication. So for the time being I will be finishing out the last few cars and take a short break, then I will see what time will allow to do some projects on the side. At this time I have had some interest from a few on buying Legacy and I am open to that aswell. I'm excited for the future. I have been blessed with great customers (Thank You All), family, friends and the opportunity to do what I always loved. I will never quit doing Fab work and building cars because it is very much a part of who I am.

Chevy II Gasser done and headed home. Was a fun build. Custom 9 inch Moser axles Posi 3.50 gear coilovers custom ladde...
11/18/2023

Chevy II Gasser done and headed home. Was a fun build. Custom 9 inch Moser axles Posi 3.50 gear coilovers custom ladder bars. Mini tubbed, Full 3 inch exhaust out the rear. Fenderwell headers. Subframe connectors & cage. Floors coated. ready for some plumbing and wiring to get her fired up. Going to make a pretty cool pavement pounder.

Remodeled this boat this summer. All new insulated floors, new decking with tons of storage, float pods, 32 gallon live...
11/18/2023

Remodeled this boat this summer. All new insulated floors, new decking with tons of storage, float pods, 32 gallon livewell with dual pumps & pump out, dual 9 gallon fuel tanks, all new wiring and carpet. Turned out Awesome I think! This one was for me, but still showcases some of what I love to do

Getting caught up again did some work on this Monte Carlo this spring. Put in a custom dual sided fuel tank anti roll b...
11/17/2023

Getting caught up again did some work on this Monte Carlo this spring. Put in a custom dual sided fuel tank anti roll bar adding some bracing changing things around to convert to twin turbo belly pan under engine and battery relocate.

My view this morning.
09/08/2023

My view this morning.

Been a bit since i posted pics, so time to clean out phone so next few days i will be doing that to get caught up. Did a...
09/07/2023

Been a bit since i posted pics, so time to clean out phone so next few days i will be doing that to get caught up.

Did a cage and some upgrades to this LS turbo powered 63 chevy truck.

Put a 6 point cage in this Nice looking Cutlass. Something about those G-Bodies!
04/20/2023

Put a 6 point cage in this Nice looking Cutlass. Something about those G-Bodies!

Mini Tubbed this 69 Camaro. By far my favorite car of all time. You will see this cruising the AVE this summer.
04/20/2023

Mini Tubbed this 69 Camaro. By far my favorite car of all time. You will see this cruising the AVE this summer.

The "Todd Rod" is ready to head to Texas. Put both quarters on fixed a few dents in doors, coated frame and floors new ...
04/20/2023

The "Todd Rod" is ready to head to Texas. Put both quarters on fixed a few dents in doors, coated frame and floors new body mounts, steering, power brakes. Tubular upper and lowers with coil overs. Rear 9 inch with disc brakes Moser axles Eaton Locker 373 gears coil overs with 4 link. Rear wheels 20x12 with 335 fronts are 18x10 with 265's. Waiting on front tires to get here.

Chubby Bunny lost 125 lbs and got the cross percentages I wanted. Turned out pretty sweet. We will see how it does in ...
04/20/2023

Chubby Bunny lost 125 lbs and got the cross percentages I wanted. Turned out pretty sweet. We will see how it does in a few weeks!!!

The DR brought the car over to me to do surgery. We are on a weight loss journey to make you more nimble and a little l...
04/06/2023

The DR brought the car over to me to do surgery. We are on a weight loss journey to make you more nimble and a little lighter on your feet to let that 250 hp do what it do. I do enjoy making these cars better and faster! I just wish the DR. would give me several weeks to do this rather than 5 days. I believe this will be an on going project in between National level short course races. I have my work cut out for me, with the car sitting at close to a ton. I believe I'll name this car Chubby Bunny!!!

Address

Cedar Rapids, IA
52411

Telephone

+13192381154

Website

Alerts

Be the first to know and let us send you an email when Legacy Custom Fabrication posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share

Category