WS6 Store / RPM Speed

09/05/2025

For any of our Fbody family, or LS/LT guys and gals in need of a tune not in our area, make sure to check out our friends at Mailordertuner They just moved into a brand new facility down there in Texas and can set you up with a tune either sending pcm to them or remote/email. Check em out www.mailordertuner.com

Tell Casey we sent ya

01/13/2025

--- OVERSTOCK---

We have an overstock 2014-2019 Speed engineering Y pipe ready to go! They were on backorder for about 4 months, but we have 1 ava now! $180 shipped!
(generic website picture box is sealed)

Only one available
regular band clamps with kit.

03/18/2023

Battery relocation kits for 93-02 Fbodys!
Make room under the hood, transfer weight to the rear, and clean up the engine bay!
(Battery not included)

More information here
https://ls1tech.com/forums/new-products-showcase/1965788-ws6store-remote-battery-relocation-kit-93-02-fbody.html

03/16/2023

How about a custom dual hellcat for an 05 2500HD big turbo Silverado?

Yes, we can do that too! 😎

Dm us we can set you up!

03/16/2023

Fresh batch of 99-02 hellcat pumps ready to make some POWER!💪💪

05/27/2022

Gen5 kits complete rebuild kits coming soon!

PLUS new ls1 bore size available for our HD pistons in both pressed pin and floating pin. They are now available in

3.898 Std size
3.903 .005 over (new)
3.908 .010 over

So not we have an extra option for the builds where you/customer/machine shop had reservations about honing an ls1 block out to 3.908" or for the 4.8/5.3 iron block guys as well! Available in our COMPLETE REBUILD KITS or as just pistons and rings. Will work on stock rods only at this time. Gen3 or 4 or LSA. We will be checking on a few aftermarket 6.098/6.100 rod options soon as some had pin fitment issues.

http://www.ws6project.com/user_stor/catalog/product_info.php?cPath=235_87_289&products_id=8564

05/12/2022

VAPORWARE PARTS AVAILABILITY!!

Anyone asking for the FTP 98/104mm lids and bummed they have been discontinued, can now rejoice like its Xmas in May, because WS6Store has a large batch of the Fast Toys Performance 98mm and 104mm lids on their way!

Eta is 2 to 3 weeks. We will update this post if anything changes.

ONLY AVAILABLE FOR PREORDER AT THIS TIME. IF YOU DONT PREORDER YOU LIKELY WONT GET ONE. First ordered, first served. No holds. No refunds.

Purchase here
http://www.ws6project.com/user_stor/catalog/index.php?cPath=235_89_65&sort=3a&filter_id=193

Here is a link to the ls1tech thread that will answer any more questions
https://ls1tech.com/forums/chevrolet-camaro-1967-2002/1958721-exclusive-ftp-98mm-104mm-lids-available.html

02/25/2022

How about some choppy chop for this Friday?
https://youtu.be/xmq_YrFfMQ0

Build specs in description (full build) but (engine) specs also below!

Sbe ls1
241 heads
PP 85MM Typhoon intake
85mm tb
Aftermarket lid
WS6Store high lift asa cam with pac 1219x beehives and pushrods (link below)
36lb injectors
340 racetronix pump (link below) with hotwire and c5 reg/filter kit (link below)
1 3/4 arh headers/catless Y/corsa catback

Cam kit
http://www.ws6project.com/user_stor/catalog/product_info.php?products_id=8670

Fuel pump kit
http://www.ws6project.com/user_stor/catalog/product_info.php?products_id=8399

C5 filter/reg kit
http://www.ws6project.com/user_stor/catalog/RPM-FUEL-UPGRADE-KIT/

Daniel Williams

Motor227/236 110 camStock 241 heads with upgraded PAC 1219X springs and 7.4 Chrome-moly pushrodsARP crank boltProfessional Products 85mm typhoon intake manif...

01/30/2022

Did someone say HELLCAT?
10 more modified hellcats ready for our 99-02 drop in fbody modules

Get em here
http://www.ws6project.com/user_stor/catalog/product_info.php?cPath=235_84_396&products_id=9778

07/23/2021

NEW SURPLUS PUMP AND IN TANK HARNESS $27 SHIPPED

Due to the large amount of modules we modify for our 255/340/hellcat pumps, we have a huge supply of new stock style pumps. Plenty of pump for stock swaps, or small to med cams. Do not require hotwire kit.

We are selling them as pictured. Pump and in tank harness only. Harness works directly with the new flat style bulkhead. Will need spliced for older square bulkhead. All pumps will have venturi fitting (venturi tube not included) unless specifically asked to not have the fitting as we do have a few of those. Due to the many different style modules we use, pump may vary slightly from picture, but still work the same. We will use unit pictured until supply is exhausted.

WE CANNOT VERIFY FITMENT. THEY ARE BEING SOLD AS UNIVERSAL IN TANK PUMPS. The pumps are all out of 99-02 fbody modules, but due to the at least 20 different variations in module styles, may not be 100% direct fit. They can also fit into other modules/be used on older style hanger assy for swaps.

Addtl parts can be added to the kit.
Pump tube $5
Pump filter/strainer/sock $5
Foam sleeve $3
Venturi tube $3

Again, these will be pump and harness only for $27 shipped. addtl parts above with pricing. Usps only.
Paypal, venmo, or card.

They will not be on the site.

Dm for more info or comment below.