Hamm’s Garage

10/06/2026

come see us! We ain’t no one trick ponies!

09/13/2026

Clint came in and said hey, my bike is dying when it gets hot. No spark. Nothing. These old bikes have these 40 amp circuit breakers. I replaced it with a maxi fuse. Ran it. Dies on me, Starts up after it cools off. So, we replace the crank sensor. Dies on me again. So I get into the bank angle sensor/Tssm find the target wire disable it. Same issue. Dies on me. Rusty and I get into the harness and found butt connectors on the bar wiring, At the plug. Wiggle the wire and we loose voltage to the coil. Just a wild electrical issue. Butt connectors never need to be used on bar wiring. Solder and heat shrink to the harness and she’s back to running as she should. Good looking 03 Softail. And he rides the p**s outa this bike. We appreciate the business Clint. I’ve named this bike (Short Circuit)

09/05/2026

Just in the shop stripping on a 2026 roadglide for a custom build! Let’s go!!

08/29/2026

Here's what's on our mind. We dont spend a whole lot of time on Social Media these days. Why???? Cause we are busy building and repairing customer's bikes. You won't get any long drawn out posts about how good we are. Our work speaks for itself. Whether it's an insurance job on this highly customized Road Glide or a simple oil change. We do it all. We aren't going anywhere. Stop by and see Brian and Rusty at Hamm’s Garage.

08/23/2026

Thank you for the business. If you want good labor. And honest opinions. Come see us. We don’t lack in any area. I’m specialized in evo. Twin cams, shovels and more. We can frame up resto. Mechanic. Service. We even do insurance jobs. Nothing we can’t do. Even paint correction. We ain’t no one trick ponies round here. P.S we’re open 7 days a week!

08/05/2026

Stew came by and asked if we could get his bike fixed. I heard a noise and couldn’t pin point the issue. I pulled the dipstick and noticed no oil in the tank. So i reached out and told him he needed a new engine. I got to looking and found a built b 88ci. everything for 1k. I checked it out before install and she’s as good as new now. Smooth old fatboy. Thank you for the business. And I hope you enjoy it! Rip it hard stew! I’ve named this bike. (Dried Out) thanks for looking

08/02/2026

08/02/2026

Old motor out. New motor in. She’s quiet as a mouse! That’s what we like to hear!

07/26/2026

Serious business in the shop. New motors. New carbs and filters. Insurance jobs. We do it all.

06/16/2026

Jugghead came in wanting a drive belt. Fuel filter and some other things. We got started on Sunday. At 6pm he rode his bike home. Jugghead is a loyal customer to us at Hamms garage. I’ve known him 30 years. And he supports me. And us! We appreciate the business! This ol gal has 110,000 miles. Factory 103. Tells you everything you need to know. We appreciate it bro! Thanks for looking!