Postalloy

Call Directions Website Contact the business

Postle Industries, in business since 1969 offers a complete range of welding alloys designed to protect equipment and components from wear.

10/09/2026

A worn edge doesn’t have to mean a new knife.

Hardfacing can give worn wood chipper knives another round of service by rebuilding the cutting profile and improving wear resistance.

Postalloy® Super-Edge and Ultra-Shred 580 are two options for the job. Choosing the right alloy starts with understanding your knife material and operating conditions.

Before you replace your knives, let’s talk about rebuilding them. Contact our team: (216) 265-9000 | [email protected]

10/08/2026

Postalloy is officially launching a new YouTube channel.

https://www.youtube.com/

We’re building this channel to be more than just a place for product videos. Going forward, we’ll be sharing real-world hardfacing knowledge, applications, and training designed to help people better understand wear and how to solve it.

Look for upcoming content including field application videos and photos, Hardfacing 101 training, product demonstrations, automation, troubleshooting, wear solutions, and technical tips from the field.

If you work around abrasion, impact, erosion, metal-to-metal wear, or hardfacing applications, this is a channel worth following.

Please subscribe to the new Postalloy YouTube channel and follow along as we continue to build it out.

More to come soon.

09/23/2026

100,000 pounds of hardfaced protection. 💪

This massive trenching machine was hardfaced with Postalloy® 2832-MCO and Postalloy® 214HD to help protect critical wear areas under demanding operating conditions.

When equipment this powerful faces serious wear, the right hardfacing solution makes all the difference.

Need help selecting the right product for your equipment? Contact our hardfacing experts to discuss your application: (216) 265-9000 or [email protected]

09/18/2026

Control the Carbide / Control the Deposit / Control the Cost

For decades, MIG carbide feeders have relied on essentially the same basic design — a vibratory hopper feeding tungsten carbide into the weld puddle.

We believed there was a better way.

Postalloy is preparing to introduce an all-new TungGuard™ Precision Carbide Feeder built around precision rotary metering technology.

Designed to provide greater control and consistency over carbide delivery, TungGuard represents a completely different approach to managing one of the most expensive parts of a carbide hardfacing deposit.

With tungsten costs where they are today, precision matters.

Coming Soon.

09/15/2026

Protecting asphalt milling equipment where wear hits hardest.

This machine uses carbide teeth to grind and remove asphalt from highway surfaces, creating severe abrasion around the cutting components.

Postalloy® 2898-FCG is applied to these high-wear areas, with excellent out-of-position welding capabilities that make it ideal for hard-to-reach surfaces. The machine’s two slide shoes are also protected with Postalloy® CR-33 chromium carbide wear plate for added abrasion resistance.

The hardfaced and untreated sides show the difference targeted wear protection can make.

Looking to extend the life of your equipment? Contact Postalloy® to find the right solution for your application: https://hardfacetechnologies.com/contact

09/02/2026

Not all cracks are defects.

In high-hardness overlays, check cracking is a normal and expected stress-relief mechanism. These small cracks typically form perpendicular to the weld bead as it cools, helping release internal stress caused by shrinkage.

However, cross cracking or cracks extending into the base metal may indicate improper welding procedures, incompatible materials or excessive stress.

Understanding the difference is essential for achieving a successful, long-lasting hardfacing application.

Have questions about cracking in your hardfacing application? Contact our team to find the right solution for your wear challenges.
🔗 https://hardfacetechnologies.com/contact

08/27/2026

Nearly five years later — and still going strong.

This dropbox takes the impact of coal falling approximately 15 feet. Before switching to Postalloy® CR-33 wear plate, the steel was being replaced about every eight months, and weld failures were a recurring problem.

The CR-33 plate was installed using Postalloy® 301 nearly five years ago, and the welds are still holding while the wear plate continues to perform exceptionally well.

A major maintenance headache turned into a long-term wear solution.

Looking for a wear solution that can stand up to severe impact and abrasion? Contact Postle Industries to learn more about Postalloy® wear products: https://hardfacetechnologies.com/contact

08/18/2026

For over 55 years, Postalloy® has been helping industries extend equipment life with high-performance hardfacing solutions built for demanding wear environments.

From railroad and mining to manufacturing and beyond, our products are designed to fight wear, reduce downtime and keep equipment working longer.

See who we are, what we do and how Postalloy® can help protect your equipment.

👉 Learn more at www.postle.com

08/12/2026

Built for the toughest jobs.

Postalloy® hardfacing solutions are designed to extend equipment life, reduce wear, and keep operations moving in demanding environments.

From abrasion and impact to heat and corrosion, we help protect the equipment that works the hardest.

Contact Postle Industries to find the right wear-protection solution for your application: 🌐 www.postle.com | 📧 [email protected] | 📞+1(216) 265-9000

08/05/2026

Product Spotlight: 2832-MCO

Built for high-abrasion applications with mild to moderate impact, 2832-MCO delivers slag-free deposits, 58–62 HRC hardness and heat resistance up to 1,000°F (538°C).

Ideal for protecting scraper blades, auger flights, screw conveyors, bucket components, shredder hammers and other wear-prone parts.

Extend equipment life and reduce downtime with dependable chromium carbide wear protection.

Contact us to learn whether 2832-MCO is the right solution for your application: 📩[email protected] | 📞+1(216) 265-9000

Address

5500 West 164th Street
Brook Park, OH
44142

Telephone

216-265-5000

Website

http://www.hardfacetechnologies.com/

Alerts

Be the first to know and let us send you an email when Postalloy posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Postalloy:

Want your business to be the top-listed autos & automotive service in Brook Park?