Tailor-Made Detailing

Tailor-Made Detailing Broken ArrowšŸ“
Paint Correction šŸŽØ/ Ceramic Coating/ Detailing šŸš˜ Industrial Equipment RestorationšŸš§

Bryan Edwards' story resonates deeply with the heartfelt journey of balancing personal passions and family commitments, especially as a single dad in Tulsa, Oklahoma. Originally working long hours in retail, Bryan found that his job was consuming precious moments that he wanted to spend with his daughter. These lost holidays and special events deeply impacted him, as every moment missed was a mome

nt he couldnā€™t get back with her. Driven by a desire to prioritize his daughter and be more present in her life, Bryan made the bold decision to leave his retail career behind after a decade. Turning to his lifelong passion for car detailing, Bryan found both a career that sparked joy and an opportunity to be there for his daughter when she needed him most. He calls car detailing his ā€œshine therapy,ā€ a passion that not only rejuvenates cars but also renews his spirit. Now, he cherishes each day as he drives his daughter to school in a car that gleams inside and out, their mornings filled with conversations that might have been missed if not for his career change. His story is one of resilience and loveā€”a single father doing what it takes to support and connect with his daughter, while also pursuing a dream that brings happiness to his family and clients alike. Bryanā€™s journey inspires others to follow their hearts and make those crucial life adjustments for the sake of family and personal fulfillment.

06/07/2026

ā€œItā€™s just equipmentā€ sounds goodā€¦ until itā€™s time to rent it, sell it, or send it to a customer.

Clean, painted, maintained machines get attention.
Dirty, faded, beat-up machines get discounted.

We sanded, primed, and painted this JLG counterweight because presentation matters.

Need paint touch-ups or equipment restoration? Tailor-Made Detailing has you covered.

06/06/2026

The itty-bitty roller is back šŸ˜‚

This time weā€™re using direct-to-metal paint to help protect the base of this machine from rust, corrosion, moisture, and jobsite abuse.

Sand it down.
Clean the surface.
Roll on multiple coats.
Protect the metal.

You only see part of the process in 60 seconds, but this is what equipment restoration actually looks like.

06/05/2026

This is the part people donā€™t always see.

Before primer and paint, the basket has to be cleaned, sanded, and prepped the right way.

Loose paint, debris, rough spots, and uneven surfaces have to come off first.

Because paint is only as good as the prep underneath it.

Clean it. Prep it. Prime it. Paint it.

Thatā€™s how we bring equipment back.

06/04/2026

Mr. Average is back on paint duty šŸ˜‚

This 4-inch roller is the perfect middle ground for touching up worn paint on heavy equipment.

Enough coverage to move fastā€¦
small enough to control around edges, welds, and tight spots.

Weā€™re not repainting the whole machine just cleaning it up, protecting exposed metal, and making this JCB look maintained again.

Small paint touch-ups make a big difference.

06/03/2026

Mr. Average is back on paint duty šŸ˜‚

Sometimes touching up one tiny spot makes it stand out even worse.

On this rear counterweight, weā€™re laying down primer first, then repainting the whole section so it blends better, protects the metal, and makes the machine look maintained again.

Clean it. Prep it. Prime it. Paint it.

Thatā€™s heavy equipment restoration done right.

06/02/2026

Quick Wash is one of the first products we grab when washing heavy equipment.

Itā€™s not a two-step.
Itā€™s not an acid.
Itā€™s a quick, effective one-step wash built for equipment, trucks, trailers, and fleet vehicles.

Spray it on ā†’ let it work ā†’ pressure wash it off.

You can foam it, but direct spray gives you the strongest cleaning power.

Available RTU and concentrate.

šŸ”— Link in Bio

06/01/2026

Fly ash and concrete buildup donā€™t come off with a basic wash.

This dump truck needed the right process:

Spray Beyond Gen ā†’ let it dwell ā†’ agitate ā†’ rinse ā†’ repeat as needed.

Built-up Portland, lime, fly ash, and concrete residue can make trucks and equipment look neglected fast.

Need the product? Check out RestoreMax Chemicals.
Need on-site service? Call Tailor-Made Detailing.

05/30/2026

This Takeuchi skid steer had built-up Portland, concrete, and jobsite grime all over it.

Weā€™re removing the buildup with Beyond Gen Concrete Remover, restoring the shine, and touching up the paint where itā€™s missing.

Need the product? Grab a gallon at restoremaxchemicals.com
Need the service? Call Tailor-Made Detailing.

Clean it. Restore it. Bring it back.

05/29/2026

Everyone keeps asking for concrete removal ASMRā€¦ so here you go.

This is the part people donā€™t always see.

After our concrete remover breaks down as much buildup as it can, sometimes there are still layers bonded into the paint from sitting too long.

At that point, it becomes slow, controlled abrasion.

Inch by inch.
Layer by layer.
Not fast. Not easy. But satisfying.

Concrete removal isnā€™t always spray, rinse, done.

Sometimes it takes patience.

Address

575 N 45th Place
Broken Arrow, OK
74014

Opening Hours

Monday 8:30am - 5pm
Tuesday 8:30am - 5pm
Wednesday 8:30am - 5pm
Thursday 8:30am - 5pm
Friday 8:30am - 5pm

Telephone

+19188453815

Website

Alerts

Be the first to know and let us send you an email when Tailor-Made Detailing posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Featured

Share