Duncan Performance and Fab

Duncan Performance and Fab Experienced tuner via holley efi, and hp tuners, Tig welding,Fabrication, and automotive services!

Go like and follow the new business page! Same quality just bigger facility 🔥🔥
07/29/2026

Go like and follow the new business page! Same quality just bigger facility 🔥🔥

This Pontiac Firebird came in awhile back for a complete read end upgrade.

Our team handled:
-Rear end swap
-Torque arm installation
-Driveshaft install
-Pinion angle adjustment
-Tailshaft + shifter reseal
-Gear ratio retune

Every drivetrain is installed, adjusted, and verified so it preforms the way it should…not just bolted together!

If you have a project that that needs quality workmanship, we are here to help!

(615) 927-7135 📞
[email protected] 📩
thelegacymotorsports.com




> Combining the area’s strongest LS/LT shop with the baddest coyote performance crew under one roof<Founded by Duncan Pe...
11/18/2025

> Combining the area’s strongest LS/LT shop with the baddest coyote performance crew under one roof<

Founded by Duncan Performance & Fab + Certified Performance, Legacy Motorsports brings top-tier tuning, fabrication, and horsepower under 1 roof.

🔧 In-house dyno tuning for Ford, Chevy, and Mopar, plus full support for Holley, Haltech, and FuelTech systems. Remote tuning support available.

⚙️ Custom fabrication in stainless, mild steel, aluminum, and even titanium.

💪 From basic maintenance to 2000HP builds, we’ve got it covered — all under one roof.

📞 (615) 927-7135
📧 [email protected]
🌐 thelegacymotorsports.com

This truck got a full rebuild with some goodies while we was there! Ls3 stage 3 gpi camshaft🔥 along with a billet circle...
11/04/2025

This truck got a full rebuild with some goodies while we was there! Ls3 stage 3 gpi camshaft🔥 along with a billet circle D torque converter 😍
Message us for any of your automotive, fabrication, or tuning needs!

Are you having a converter shutter? Did you know 75% of the time we can cure that with tuning out the bad strategy gm us...
11/04/2025

Are you having a converter shutter?
Did you know 75% of the time we can cure that with tuning out the bad strategy gm uses!!
Unfortunately for this customer we had to replace the torque converter!
Message us for any of your automotive, fabrication, or tuning needs!

I didn’t get to share this absolutely beauty of a truck I tuned last week 🔥🔥 Legit perfection as always with Charlies Cu...
09/25/2025

I didn’t get to share this absolutely beauty of a truck I tuned last week 🔥🔥 Legit perfection as always with Charlies Custom Creations building it from the frame up! This one even has a man pedal😎
Motion Raceworks
Brian Tooley Racing
Holley

08/06/2025

Those 10 speed gear shifts be hitting 🔥🔥🔥 This was a killer angle until the phone couldn’t handle the power 🤟🤟 This H/C/I car was a rowdy all motor car! Message us for all of your tuning, fabrication, or automotive needs!

We knocked out the tune on this beautiful Chevy truck with belt driven hair dryer on it 🔥🔥 Message us for any of your au...
07/30/2025

We knocked out the tune on this beautiful Chevy truck with belt driven hair dryer on it 🔥🔥 Message us for any of your automotive, fabrication, or tuning needs!

05/22/2025

Who doesn’t love a good blower whine🔥🔥 This hellcat swapped Cuda with that Whipple Superchargers laying down some great power and sounding even better while doing it 🤟 It’s always a pleasure to work with Charlies Custom Creations as they perfect every single build 💪💪

Warmer weather is upon us if anyone is needing any parts to finish up your winter projects to get out on the road to enj...
04/21/2025

Warmer weather is upon us if anyone is needing any parts to finish up your winter projects to get out on the road to enjoy those hot rods let me know if we can help you with these as we are a direct dealer for the companies listed below.
Toohighpsi Performance
Brian Tooley Racing
Holley
Fuel Injector Clinic
Performance Torque Converters
Forcedinductions.com
Turbosmart
Motion Raceworks
Comp Turbos
Rife Sensors
Tbm Brakes

Address

2400 Swamp Road
Bradyville, TN
37060

Opening Hours

Monday 8am - 5pm
Tuesday 8am - 5pm
Wednesday 8am - 5pm
Thursday 8am - 5pm
Friday 8am - 5pm

Telephone

+16153187698

Website

Alerts

Be the first to know and let us send you an email when Duncan Performance and Fab posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share