K&L Machine and Welding

K&L Machine and Welding We are a precision machine, welding and automotive shop. We have the capabilities to weld most metals and processes including MIG, TIG, TIG Aluminum, and Stick.

K&L Machine and Welding "We build the best and repair the rest" We have the equipment , experience and know-how to handle most all of your machining and welding needs. We have precision turning, milling, grinding and measuring capabilities. We also offer automotive diagnostic, repair, and body shop and restoration services.

It's not often we're called on to make a gear here at K&L Machine. This is only about the 7th or 8th one I've ever cut i...
06/16/2026

It's not often we're called on to make a gear here at K&L Machine. This is only about the 7th or 8th one I've ever cut in my entire career. But, a neighbor had a small crane that had a bad swing gear that he couldn't source anywhere.... initially I wasn't even sure we could do it with the equipment we have....but I put on my thinking cap and started working it out....96 cuts later this is what we ended up with. Our neighbor was just as happy as he could be.

This is a small fixture we made to speed production of the gussets used on our plastic pumps we manufacture.
06/08/2026

This is a small fixture we made to speed production of the gussets used on our plastic pumps we manufacture.

Here's a project we recently finished. These are tank lids for electroplating tanks. These were a job to do because of t...
06/08/2026

Here's a project we recently finished. These are tank lids for electroplating tanks. These were a job to do because of their size. Our EZ -Trak has a 48" table and 30" of x travel...the parts were 60" long....needless to say it took a lot of setups, lots of relocating, and lots of attention to keep everything on track. Come see us for all of your machining, welding, and plastic welding needs.

This is just a test weld on some scrap PVC plastic that I did since I'd never welded this material before. The welds on ...
05/06/2026

This is just a test weld on some scrap PVC plastic that I did since I'd never welded this material before. The welds on my parts look better than the test piece, but it honestly never ceases to amaze me how strong these plastic welds are. Before I became familiar with the plastic welding process I never imagined I'd ever say this, but, I honestly wouldn't have an issue with trusting life and limb to a plastic weld that is done correctly.

I thought this picture was very fitting for our 100% American made pumps.... here's another one ready to be crated and s...
04/21/2026

I thought this picture was very fitting for our 100% American made pumps.... here's another one ready to be crated and shipped out.

Ordinarily I'm not crazy about running two machines at the same time. I realize every bean counter who reads this is goi...
04/17/2026

Ordinarily I'm not crazy about running two machines at the same time. I realize every bean counter who reads this is going to gasp at that statement, but sometimes less is more. Doesn't matter if it's me or someone working for me....I just don't like it usually. That being said, today is a bit different.... today I have both the Wells-Index and the EZ -Trak running and it's working like clockwork....the programs and set ups are working perfectly, so no need to waste time babysitting either one of them.

Finished this project a couple days ago and in the process I finally found a good use for this extra thick tap magic tap...
03/29/2026

Finished this project a couple days ago and in the process I finally found a good use for this extra thick tap magic tapping oil I bought many years ago and then didn't like. This stuff is SOOOOO MESSY!!! But... I found out on this job that it works fantastic on titanium, which is one of the toughest materials I've ever tapped with the exception of beryllium-copper alloy. We had several 16 hour days on this project to get it done in the timeframe that our customer needed, but when we give our word that it'll be done by a certain date, we do whatever we have to to make that happen. Our word still means something here at K&L Machine and Welding Once again, a big thanks to Kim Phillips for understanding that I had to be in the shop so much for the past week.

Address

191 Dead End Road
Bostic, NC
28018

Opening Hours

Monday 12pm - 4pm
Tuesday 12pm - 4pm
Wednesday 12pm - 4am
Thursday 12pm - 4pm
Friday 12pm - 3pm

Website

Alerts

Be the first to know and let us send you an email when K&L Machine and Welding posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to K&L Machine and Welding:

Shortcuts

Share