Oilypipes Garage

10/23/2025

11/26/2024

Just woke up from a 32 year nappy nap 👂...last ran in 1993.

08/22/2024

FACT !! 🤓

12/29/2020

Bi-annual tune up job security...points eater.
😳😂...

11/28/2020

Tyler Harrington 👀

11/28/2020

😍

03/07/2020

FS : Listing for a friend...***SOLD***
1973 RD350 engine...fresh SCR crankshaft with new Yamaha main bearings, Pro X con rods, welded pins. Stage 1 ported cylinders, machined for RD400 head gaskets, late '75 cyl heads, Pro X RZ/Banshee pistons, no oil inj. ...set up for premix, new '75 seven plate clutch assembly, all new oem seals and gaskets, VM28 carbs with R5 primary NJ's and matching needles, jetted properly, Y-boot/ K&N intake, trans in excellent condition, etc, etc. Has 102 miles on it...right side intake manifold started sucking air at fl**ge when hot and holed the right side piston crown ( hard lesson learned with used, older intake manifolds )
Will need one 64.75 piston kit on r/s and clean/ hone the bore, or bore both cyls to 65mm. I would also get a new set of intake manifolds ( has used RZ/ Banshee intakes w/ crossover). Sidecovers/paint is rough to match the ratty sleeper RD it was in. He ended up putting a Banshee engine in his RD, so he just wants to try to recoup some $ from the fresh RD engine build
( the rebuilt crank alone was just under $600)
plus the porting, machine work, etc. Complete with ignition, carbs, etc. Located in N. Newark NJ. ***SOLD***

02/17/2020

My friend Brian was just inducted into the AMA Hall of Fame! Interesting read...

HARRISBURG, Pa. (WHTM) — Brian and Brett Thompson were the first African American siblings to hold professional motocross licenses with the American Motorcyclist Association. They grew up i…