Dagmar Customs, LLC

Dagmar Customs, LLC Traditional craftsmanship - sheet metal fabrication for fine automobiles

Another Dino out the door . Completed the last of the metalwork on the “Deja Vu” Dino 246GTS. There was only a small pi...
02/23/2024

Another Dino out the door . Completed the last of the metalwork on the “Deja Vu” Dino 246GTS. There was only a small pile of rusty, damaged old steel cut from this Spider. It was in serious need of a nose job, a pair of door skins, inner and outer rockers, lower quarters, inner tail section, etc. etc. And praise be to God it all came back together.






🇮🇹

Merry Christmas to all!May your hearts be filled with the Truth and Light as we celebrate our dear Savior’s birth
12/25/2023

Merry Christmas to all!
May your hearts be filled with the Truth and Light as we celebrate our dear Savior’s birth

I had to update the progress on the Deva Vu Dino. While the headlight surround was being fit, I wondered over to the Ed...
11/22/2023

I had to update the progress on the Deva Vu Dino. While the headlight surround was being fit, I wondered over to the Edwards English wheel to shape the new top section of the fender. After, I decided the section below that was too damaged and thin so I replaced that also. So here it is, all welded and finished.










The reconstruction of the Deja Vu Dino is well underway. The passenger headlight area was one of the uglier parts of th...
11/21/2023

The reconstruction of the Deja Vu Dino is well underway. The passenger headlight area was one of the uglier parts of this Spider, with all of the poor previously welded repairs, overlapped metal and holes resulting from media blasting the excessive grinding of the already thin sheet metal. Using a simple MDF hammer form (and quite a bit of shrinking the edges) the new headlight mounting fl**ge and surround was created. Then came the tedious hand flanging process to achieve tapering 5/16” flat faced ring to fit the rest of fender opening and headlight tunnel. Here it is fit and welded in place. Next up, welding in the new fender section.




Who knows what evil lies beneath shiny red paint. This may look like the ‘73 Dino 246GTS that just left the shop but in ...
11/17/2023

Who knows what evil lies beneath shiny red paint. This may look like the ‘73 Dino 246GTS that just left the shop but in fact it’s another identical Spider, the Deja Vu Dino. Once disassembled and stripped by it can be seen that it needs much of the same damage and rust repair as the last one. Work has been started on the lower quarters.





A few final shots of the ‘73 Dino 246 GTS before it left . I’m so excited to see DJ lay down some color on this gorge...
08/07/2023

A few final shots of the ‘73 Dino 246 GTS before it left . I’m so excited to see DJ lay down some color on this gorgeous Pininfarina designed body!








Wrapped up the nose job on the Spider. Several new sections of the lower nose and inner structure were fabricated due t...
07/28/2023

Wrapped up the nose job on the Spider. Several new sections of the lower nose and inner structure were fabricated due to rust and damage. Even a section of the wire in the wired edge rotted away. Praise be to God, it all fit back together nicely.





🇮🇹



Address

3811 E State Highway 29, Unit A14
Bertram, TX
78605

Telephone

+15122663032

Website

Alerts

Be the first to know and let us send you an email when Dagmar Customs, LLC posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Dagmar Customs, LLC:

Shortcuts

Share

Category